L17HTNAS4R4C D-Sub Receptacle 15-Position Equivalent & Substitute Parts

Part Overview

The L17HTNAS4R4C is a 15-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This female socket connector features right-angle through-hole solder termination and is designed for signal applications requiring board-side mounting with 4-40 fastening. The connector is actively produced and stocked with 1073 units in inventory.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application requirements that permit substitution within defined electrical and mechanical parameters.

Substiute Parts

L17HTNAS4R4C

Amphenol ICC (Commercial Products)In Stock: 1096L17HTNAS4R4C Datasheet

Current PartRFQ

09682535612

HARTINGIn Stock: 121409682535612 Datasheet

SimilarRFQ

09682535613

HARTINGIn Stock: 78109682535613 Datasheet

SimilarRFQ

09682537612

HARTINGIn Stock: 106209682537612 Datasheet

SimilarRFQ

09682537613

HARTINGIn Stock: 77609682537613 Datasheet

SimilarRFQ

182-015-213R161

NorComp Inc.In Stock: 841182-015-213R161 Datasheet

SimilarRFQ

182-015-213R181

NorComp Inc.In Stock: 966182-015-213R181 Datasheet

SimilarRFQ

182-015-213R531

NorComp Inc.In Stock: 9880182-015-213R531 Datasheet

SimilarRFQ

A-DF 15 A/KG-T2S

Assmann WSW ComponentsIn Stock: 4098A-DF 15 A/KG-T2S Datasheet

SimilarRFQ

D15S33E4GV00LF

Amphenol ICC (FCI)In Stock: 3961D15S33E4GV00LF Datasheet

SimilarRFQ

ID15S33E4GX00LF

Amphenol ICC (FCI)In Stock: 1528ID15S33E4GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L17HTNAS4R4C is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Type: Signal
• Material Flammability Rating: UL94 V-0
• Backset Spacing: 0.318" (8.08mm)

Allowable Variation Parameters:

• Flange Feature: Board Side (4-40) or Housing/Shell (4-40) or Mating Side, Female Screwlock (4-40)
• Shell Material, Finish: Steel with Tin-Nickel, Nickel, or Tin plating
• Contact Finish: Gold or Gold-Palladium
• Current Rating: 5A or higher
• Voltage Rating: 600V or higher (or unspecified)
• Operating Temperature Range: Must encompass -55°C minimum; upper limit 105°C or higher
• Dielectric Material: Thermoplastic Glass Filled, Polybutylene Terephthalate (PBT), or Polyamide (PA9T)
• RoHS Status: RoHS Compliant or ROHS3 Compliant

Substitute parts are grouped by flange feature configuration, as this parameter affects board layout and mechanical integration while maintaining electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The parts ID15S33E4GX00LF and D15S33E4GV00LF (both Amphenol ICC FCI series) are the most direct substitutes for the L17HTNAS4R4C. Both maintain the same manufacturer family, achieve RoHS Compliance status, support 5A current rating, and operate across the -55°C to 125°C temperature range. ID15S33E4GX00LF features board-side flange mounting identical to the main part, while D15S33E4GV00LF provides mating-side screwlock configuration. Both are actively produced with substantial inventory availability (3931 and 1511 units respectively).

Secondary Substitutes (Flange Feature Variation):

The NorComp Inc. 182-015 series (parts 182-015-213R531, 182-015-213R181, and 182-015-213R161) provides substitution with panel mount capability in addition to through-hole mounting. These parts maintain 5A current rating and -55°C minimum operating temperature. The 182-015-213R531 variant with board-side housing flange offers the closest mechanical alignment to the L17HTNAS4R4C, with the highest inventory level (9826 units) among all substitutes. ROHS3 Compliance status is maintained across this series.

Alternative Substitutes (Reduced Current Rating):

The Assmann WSW Components part A-DF 15 A/KG-T2S is substitutable for applications where 3A current rating is acceptable. This part maintains the same connector geometry, solder termination, and operating temperature minimum of -55°C. Voltage rating is specified at 250V, which is lower than the main part's 600V specification. ROHS3 Compliance is achieved.

HARTING Series Substitutes (Voltage Rating Unspecified):

The HARTING parts (09682535612, 09682535613, 09682537612, 09682537613) support higher current ratings (6.5A) and maintain the required connector geometry and solder termination. Voltage ratings are not specified for these parts. Operating temperature range is -55°C to 125°C. ROHS3 Compliance is achieved. These parts are suitable for applications where voltage rating specification is not a design constraint.

Compliance Verification:

All substitute parts maintain UL94 V-0 material flammability rating and achieve either RoHS Compliant or ROHS3 Compliant status, ensuring regulatory alignment with the main part. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for all parts, indicating no special handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can I substitute the L17HTNAS4R4C with any of the listed parts without design modification?

A: Substitution depends on flange feature compatibility with your board layout. The ID15S33E4GX00LF and 182-015-213R531 both feature board-side (4-40) flanges matching the L17HTNAS4R4C and require no mechanical redesign. Parts with mating-side screwlock or unthreaded flanges require different mounting provisions. Verify your PCB mounting hole pattern before selection.

Q: What is the difference between the HARTING 09682535612 and 09682535613 parts?

A: Both are HARTING 15-position D-Sub receptacles with identical electrical specifications (6.5A current, -55°C to 125°C operating range). The primary difference is flange configuration: 09682535612 features housing/shell (4-40) mounting, while 09682535613 features mating-side female screwlock (4-40) mounting. Select based on your connector mating interface requirements.

Q: Are the NorComp 182-015 series parts direct replacements for the L17HTNAS4R4C?

A: The NorComp 182-015-213R531 is mechanically compatible with board-side (4-40) mounting. However, NorComp parts support panel mount in addition to through-hole mounting, which may result in different physical dimensions. Verify mechanical fit in your application. All NorComp 182-015 variants maintain 5A current rating and -55°C minimum operating temperature matching the main part.

Q: Why do some substitute parts have unspecified voltage ratings?

A: Voltage rating specifications are provided by manufacturers based on design validation and application requirements. Unspecified voltage ratings do not indicate inadequate performance; they reflect manufacturer documentation practices. For applications requiring specific voltage ratings, select parts with explicit voltage specifications (ID15S33E4GX00LF at 300V, D15S33E4GV00LF at 300V, or A-DF 15 A/KG-T2S at 250V).

Q: Can I use the Assmann A-DF 15 A/KG-T2S as a substitute if my application requires 5A current?

A: No. The A-DF 15 A/KG-T2S is rated for 3A maximum current, which is below the L17HTNAS4R4C specification of 5A. Using this part in a 5A application exceeds its current rating and creates reliability risk. Select parts with 5A or higher current ratings: ID15S33E4GX00LF, D15S33E4GV00LF, 182-015-213R531, 182-015-213R181, 182-015-213R161, or HARTING 09682535612/09682535613/09682537612/09682537613.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant status?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. RoHS Compliant refers to the original RoHS Directive (2002/95/EC), while ROHS3 Compliant refers to the recast directive (2011/65/EU). Both are acceptable for regulatory purposes. All listed substitute parts meet current compliance requirements.

Q: Do all substitute parts have the same backset spacing as the L17HTNAS4R4C?

A: The L17HTNAS4R4C specifies 0.318" (8.08mm) backset spacing. All listed substitutes maintain this specification except the Assmann A-DF 15 A/KG-T2S, which specifies 0.319" (8.10mm). This 0.001" difference is within typical manufacturing tolerance and does not affect functional compatibility in standard applications.

Q: Which substitute part has the highest inventory availability?

A: The NorComp 182-015-213R531 has the highest inventory level at 9826 units. This part features board-side (4-40) flange mounting compatible with the L17HTNAS4R4C and maintains 5A current rating and -55°C to 105°C operating temperature range.

Q: Are there any substitute parts that support the full -55°C to 150°C operating temperature range of the L17HTNAS4R4C?

A: No substitute part listed achieves the full -55°C to 150°C operating temperature range of the L17HTNAS4R4C. The highest upper operating temperature among substitutes is 125°C (ID15S33E4GX00LF, D15S33E4GV00LF, and HARTING 09682535612/09682535613). For applications requiring operation above 125°C, the L17HTNAS4R4C remains the only option among these parts.