L17HTNAS4R1C D-Sub Receptacle 15-Position Right Angle Solder Connector

Part Overview

The L17HTNAS4R1C is a 15-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products), configured for right-angle through-hole mounting with solder termination. This connector is classified as active product status and serves applications requiring female socket connectivity in D-Sub form factor with board-level mounting. Alternative equivalent parts are necessary to address supply chain requirements, specific flange feature needs, or compliance variations across different manufacturing environments.

Substiute Parts

L17HTNAS4R1C

Amphenol ICC (Commercial Products)In Stock: 1079L17HTNAS4R1C Datasheet

Current PartRFQ

09682535612

HARTINGIn Stock: 121409682535612 Datasheet

SimilarRFQ

09682535613

HARTINGIn Stock: 78109682535613 Datasheet

SimilarRFQ

09682537612

HARTINGIn Stock: 106209682537612 Datasheet

SimilarRFQ

09682537613

HARTINGIn Stock: 77609682537613 Datasheet

SimilarRFQ

182-015-213R161

NorComp Inc.In Stock: 841182-015-213R161 Datasheet

SimilarRFQ

182-015-213R531

NorComp Inc.In Stock: 9880182-015-213R531 Datasheet

SimilarRFQ

A-DF 15 A/KG-T2S

Assmann WSW ComponentsIn Stock: 4098A-DF 15 A/KG-T2S Datasheet

SimilarRFQ

D15S33E4GV00LF

Amphenol ICC (FCI)In Stock: 3961D15S33E4GV00LF Datasheet

SimilarRFQ

ID15S33E4GX00LF

Amphenol ICC (FCI)In Stock: 1528ID15S33E4GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility is determined by the following critical parameters that define functional equivalency for the L17HTNAS4R1C:

Primary Substitution Criteria:

• Connector Style: D-Sub (required)
• Connector Type: Receptacle, Female Sockets (required)
• Number of Positions: 15 (required)
• Number of Rows: 2 (required)
• Shell Size, Connector Layout: 2 (DA, A) (required)
• Mounting Type: Through Hole, Right Angle (required)
• Termination: Solder (required)
• Backset Spacing: 0.318" (8.08mm) (required)
• Material Flammability Rating: UL94 V-0 (required)

Secondary Parameters Allowing Variation:

• Flange Feature: Board Side, Housing/Shell, or Mating Side configurations are functionally equivalent
• Current Rating: 5A (main part) to 6.5A (higher rating substitutes provide equal or greater capacity)
• Operating Temperature: Range variations (-55°C ~ 125°C or -55°C ~ 105°C) remain within application scope provided minimum -55°C and maximum ≥105°C are met
• Shell Material Finish: Steel with Tin-Nickel, Tin, or Nickel plating
• Contact Finish: Gold or Gold-Palladium with Flash or 30.0µin thickness
• Voltage Rating: Variations (250V, 300V, 600V) acceptable based on circuit requirements
• Compliance Status: RoHS Compliant and ROHS3 Compliant both acceptable
• Packaging: Tray or Bulk configurations

Parts 09682535612, 09682535613, 09682537612, 09682537613, 182-015-213R161, 182-015-213R531, A-DF 15 A/KG-T2S, D15S33E4GV00LF, and ID15S33E4GX00LF meet these substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status, ensuring ongoing manufacturability and supply chain support. Selection between L17HTNAS4R1C and substitute parts depends on compliance requirements and operational specifications:

Primary Selection Criteria:

1. Compliance Tier: The L17HTNAS4R1C, D15S33E4GV00LF, and ID15S33E4GX00LF carry RoHS Compliant designation. The HARTING parts (09682535612, 09682535613, 09682537612, 09682537613) and NorComp parts (182-015-213R161, 182-015-213R531) and Assmann part (A-DF 15 A/KG-T2S) are ROHS3 Compliant. Both compliance standards are acceptable for new designs.

2. Operating Temperature: The L17HTNAS4R1C operates to 150°C maximum, providing the widest thermal envelope. Substitute parts operate to 105°C or 125°C. Select based on application thermal requirements.

3. Voltage Rating: The L17HTNAS4R1C supports 600V. The Amphenol FCI parts (D15S33E4GV00LF, ID15S33E4GX00LF) support 300V. The Assmann part (A-DF 15 A/KG-T2S) supports 250V. HARTING and NorComp parts do not specify voltage rating. Circuit voltage requirements determine appropriate selection.

4. Current Rating: The L17HTNAS4R1C is rated 5A per contact. HARTING parts provide 6.5A, offering enhanced current capacity. The Assmann part (A-DF 15 A/KG-T2S) is rated 3A, limiting to lower-current applications. Select based on per-contact current draw.

5. Flange Feature Configuration: Mounting interface differences exist. The L17HTNAS4R1C features board-side flange. Substitutes offer board-side, housing-shell, or mating-side screwlock variants. PCB layout and assembly requirements determine appropriate flange orientation.

6. Backset Spacing: The A-DF 15 A/KG-T2S specifies 0.319" (8.10mm), compared to 0.318" (8.08mm) for all other parts. This 0.01" tolerance difference is negligible for standard PCB routing.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of the listed parts directly for the L17HTNAS4R1C in existing designs?

A: Substitution feasibility depends on three factors: (1) your circuit's voltage requirement (600V primary part versus 250V–300V alternatives), (2) operating temperature specification (150°C primary versus 105–125°C alternatives), and (3) per-contact current demand (3A–6.5A ratings vary). Electrical specifications must be matched or exceeded. Physical dimensions and mounting footprint are identical across all parts except the A-DF 15 A/KG-T2S backset spacing difference.

Q: What is the difference between board-side, housing-shell, and mating-side flange configurations?

A: Flange feature determines the mechanical mounting interface. Board-side flange mounts on the PCB surface opposite the connector entry face. Housing-shell flange provides alternate mounting geometry. Mating-side female screwlock flange orients toward the connector mating interface. Selection depends on available board space and assembly equipment capability.

Q: Are HARTING and NorComp parts truly equivalent to the Amphenol ICC primary part?

A: Yes, within specified electrical parameters. All parts share identical 15-position D-Sub shell size, 2-row configuration, 0.318" (8.08mm) backset spacing, through-hole right-angle mounting, solder termination, and UL94 V-0 flammability rating. HARTING and NorComp parts operate to 105–125°C versus 150°C for the primary part. Select HARTING or NorComp only when application temperature does not exceed their maximum operating temperature.

Q: Why do some substitute parts list no voltage rating?

A: HARTING and NorComp specifications do not provide explicit voltage ratings in the available data. The Amphenol ICC primary part specifies 600V, and the Amphenol FCI and Assmann substitutes specify 300V and 250V respectively. In the absence of published voltage specifications, contact the manufacturer directly to confirm suitability for your circuit voltage.

Q: Is the 0.01" backset spacing difference in the A-DF 15 A/KG-T2S critical for PCB design?

A: The 0.319" (8.10mm) backset spacing on the A-DF 15 A/KG-T2S versus 0.318" (8.08mm) on all other parts represents a 0.01" difference within standard PCB tolerancing. This difference is not significant for design purposes and does not affect compatibility in standard applications. Confirm with your PCB layout requirements if tight spacing constraints exist.

Q: All parts carry EAR99 classification. What does this mean for export?

A: EAR99 designates these D-Sub connectors as commodity electronic components generally not subject to detailed export licensing requirements. Export regulations vary by country and end-use; consult your compliance department for specific regulatory requirements applicable to your destination markets.

Q: Do all substitute parts carry the same moisture sensitivity classification?

A: Most carry MSL 1 (Unlimited). The NorComp 182-015-213R161 carries MSL Not Applicable. Both designations indicate no special moisture handling during storage or assembly. Standard component storage practices are sufficient.