L17HTNAP4R1C D-Sub Plug 15 Position Right Angle Solder Connector

Part Overview

The L17HTNAP4R1C is a 15 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) in the HTN series. This connector features male pins, right angle through-hole mounting, and solder termination. The connector is actively produced and maintains an inventory of 822 pieces in new original condition.

D-Sub connectors are standard interface components used in data acquisition, industrial control, telecommunications, and legacy computing applications. Alternative equivalent and substitute parts become necessary when addressing supply chain constraints, specific flange feature requirements, or compliance certifications for particular applications.

Substiute Parts

L17HTNAP4R1C

Amphenol ICC (Commercial Products)In Stock: 882L17HTNAP4R1C Datasheet

Current PartRFQ

09682635813

HARTINGIn Stock: 95509682635813 Datasheet

SimilarRFQ

09682637813

HARTINGIn Stock: 108409682637813 Datasheet

SimilarRFQ

182-015-113R161

NorComp Inc.In Stock: 1360182-015-113R161 Datasheet

SimilarRFQ

182-015-113R181

NorComp Inc.In Stock: 2908182-015-113R181 Datasheet

SimilarRFQ

182-015-113R531

NorComp Inc.In Stock: 3760182-015-113R531 Datasheet

SimilarRFQ

D15P33E4GV00LF

Amphenol ICC (FCI)In Stock: 4082D15P33E4GV00LF Datasheet

SimilarRFQ

D15P33E4GX00LF

Amphenol ICC (FCI)In Stock: 2085D15P33E4GX00LF Datasheet

SimilarRFQ

D15P33E6GV00LF

Amphenol ICC (FCI)In Stock: 1180D15P33E6GV00LF Datasheet

SimilarRFQ

D15P33E6GX00LF

Amphenol ICC (FCI)In Stock: 1234D15P33E6GX00LF Datasheet

SimilarRFQ

ID15P33E4GV00LF

Amphenol ICC (FCI)In Stock: 1458ID15P33E4GV00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of D-Sub 15 position plug connectors is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Connector type (plug with male pins)
• Number of positions (15)
• Number of rows (2)
• Shell size and layout (2 / DA, A)
• Mounting type (through hole, right angle)
• Termination method (solder)
• Backset spacing (0.318" / 8.08mm)
• Material flammability rating (UL94 V-0)

Allowable Variation Parameters:

• Flange feature type (board side, mating side screwlock, or housing/shell configurations)
• Shell material finish (tin-nickel plated, nickel plated, or tin plated)
• Contact finish thickness (flash or 30.0µin / 0.76µm)
• Contact material composition (brass or copper alloy)
• Dielectric material (thermoplastic glass-filled, polybutylene terephthalate, polyamide, or polyester)
• Current rating (5A to 6.5A per contact)
• Operating temperature range (minimum -55°C, maximum 105°C to 150°C)
• Voltage rating (300V to 600V)
• Packaging format (tray or bulk)
• RoHS compliance status (RoHS Compliant or ROHS3 Compliant)

Substitutes are grouped by manufacturer and series to facilitate procurement decisions based on availability, compliance requirements, and specific application constraints.

Parameter Comparison

Engineering Selection Recommendations

Amphenol ICC HTN Series (L17HTNAP4R1C)

The L17HTNAP4R1C maintains the highest voltage rating (600V) and widest operating temperature range (-55°C to 150°C) among all listed options. This part is RoHS Compliant and features board-side flange mounting. Selection is appropriate for applications requiring maximum voltage headroom and extended high-temperature operation.

Amphenol ICC Delta D Series (D15P33E4GV00LF, D15P33E4GX00LF, D15P33E6GV00LF, D15P33E6GX00LF)

Delta D series connectors provide equivalent 5A current rating and maintain RoHS or ROHS3 compliance. The E4 variants feature flash gold contact finish, while E6 variants provide thicker gold plating (30.0µin / 0.76µm) with GXT™ coating option. Voltage rating is 300V. Operating temperature range extends to -55°C to 125°C. Flange options include mating-side female screwlock (GV suffix) or housing/shell (GX suffix). These parts are suitable for applications where the lower voltage rating is acceptable and enhanced contact durability is beneficial.

Amphenol ICC ID Series (ID15P33E4GV00LF)

The ID series connector offers ROHS3 compliance with tin-plated steel shell finish and copper alloy contacts. Operating temperature range is -55°C to 125°C with 300V voltage rating. This variant is packaged in bulk format and is appropriate for high-volume procurement scenarios.

HARTING Series (09682635813, 09682637813)

HARTING connectors provide 6.5A current rating, exceeding the main part specification. Both variants feature mating-side female screwlock flanges and ROHS3 compliance. Operating temperature range is -55°C to 125°C. The 09682635813 specifies gold or gold-palladium contact finish at 30.0µin thickness. The 09682637813 does not specify contact finish details. These parts are packaged in bulk format and are suitable for applications requiring higher current capacity.

NorComp Inc. Series 182 (182-015-113R161, 182-015-113R181, 182-015-113R531)

NorComp connectors maintain 5A current rating and ROHS3 compliance with nickel-plated steel shells and brass contacts with flash gold finish. Operating temperature range is -55°C to 105°C. All three variants support panel mount and through-hole right-angle mounting. Flange options include unthreaded housing (R161), mating-side female screwlock (R181), and housing with 4-40 threads (R531). These parts are packaged in tray format with highest inventory availability (3693 units for R531). Selection is appropriate for applications where panel mounting capability is required and lower maximum operating temperature is acceptable.

Frequently Asked Questions (FAQ)

Q: Can I substitute the L17HTNAP4R1C with any of the listed alternatives?

A: Substitution is possible only when the application requirements align with the substitute part's specifications. All listed parts share the same 15-position D-Sub plug configuration with right-angle solder termination. However, differences in voltage rating, operating temperature range, current capacity, and flange feature type must be evaluated against your specific application requirements.

Q: What is the primary difference between the Amphenol ICC HTN series and the Delta D series?

A: The HTN series (L17HTNAP4R1C) provides a 600V voltage rating and -55°C to 150°C operating temperature range. The Delta D series provides 300V voltage rating and -55°C to 125°C operating temperature range. The HTN series is appropriate for high-voltage applications and extended high-temperature environments. The Delta D series is suitable for standard industrial applications where the lower voltage and temperature specifications are sufficient.

Q: What does the flange feature designation mean?

A: The flange feature indicates the mounting interface and locking mechanism. Board-side flanges mount directly to the PCB with locking tabs. Mating-side female screwlock flanges provide threaded connection points on the connector face for cable retention. Housing/shell flanges provide unthreaded or threaded mounting points on the connector body. Selection depends on the mechanical interface requirements of your application.

Q: Are all substitute parts RoHS compliant?

A: The L17HTNAP4R1C is RoHS Compliant. Most substitute parts are ROHS3 Compliant, which represents a later revision of the RoHS directive. Both compliance statuses are acceptable for most applications. Verify compliance requirements with your specific regulatory or customer requirements.

Q: What is the difference between flash gold and 30.0µin gold plating?

A: Flash gold is a very thin gold coating applied to the contact surface for corrosion protection and conductivity. The 30.0µin (0.76µm) specification indicates a thicker, more durable gold plating layer. Thicker plating provides enhanced wear resistance and is appropriate for connectors subject to frequent mating cycles or harsh environmental conditions.

Q: Can I use a HARTING connector rated for 6.5A in place of the 5A-rated L17HTNAP4R1C?

A: Yes, a higher current rating is a conservative substitution. The 6.5A rating of HARTING connectors exceeds the 5A requirement of the main part. This substitution is appropriate when the application current draw does not exceed 5A. The higher rating provides additional margin and does not create compatibility issues.

Q: What is the significance of the operating temperature range difference?

A: The L17HTNAP4R1C operates from -55°C to 150°C. Most substitute parts operate to 105°C or 125°C maximum. If your application requires operation above 125°C, the L17HTNAP4R1C or Delta D series (to 125°C) must be used. For applications with maximum operating temperatures below 105°C, all substitute parts are suitable.

Q: Does packaging format (tray vs. bulk) affect connector performance?

A: Packaging format does not affect electrical or mechanical performance. Tray packaging provides individual compartments for component protection during storage and handling. Bulk packaging is more economical for high-volume procurement. Selection should be based on your inventory management and procurement volume requirements.

Q: Are NorComp connectors compatible with Amphenol ICC connectors in the same application?

A: Yes, all listed connectors share the same 15-position D-Sub plug configuration with identical pin spacing (0.318" / 8.08mm) and right-angle solder termination. Mechanical and electrical compatibility is maintained across manufacturers. Verify that the specific flange feature and operating temperature range of the NorComp part meet your application requirements.

Q: What should I consider when selecting between mating-side screwlock and housing-shell flange options?

A: Mating-side female screwlock flanges provide threaded connection points on the connector face for cable retention and are appropriate for applications requiring secure cable attachment. Housing/shell flanges provide mounting points on the connector body and are appropriate for applications where the connector is mounted to a panel or enclosure. Selection depends on your mechanical interface design and cable retention requirements.