L17HTNAHSOL2RM84C

Part Overview

The L17HTNAHSOL2RM84C is a 15-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This female sockets connector features vertical solder termination and is designed for through-hole mounting applications. The part is currently active and in stock with 881 units available. Alternative substitute parts are necessary to provide design flexibility, ensure supply chain continuity, and address specific application requirements such as operating temperature ranges, termination methods, and compliance certifications.

Substiute Parts

L17HTNAHSOL2RM84C

Amphenol ICC (Commercial Products)In Stock: 899L17HTNAHSOL2RM84C Datasheet

Current PartRFQ

09662117503

HARTINGIn Stock: 80409662117503 Datasheet

SimilarRFQ

09662516513

HARTINGIn Stock: 175509662516513 Datasheet

SimilarRFQ

09662556513

HARTINGIn Stock: 70009662556513 Datasheet

SimilarRFQ

747141-2

TE Connectivity AMP ConnectorsIn Stock: 786747141-2 Datasheet

SimilarRFQ

D15S24A4GV00LF

Amphenol ICC (FCI)In Stock: 35597D15S24A4GV00LF Datasheet

SimilarRFQ

D15S24A4GX00LF

Amphenol ICC (FCI)In Stock: 1199D15S24A4GX00LF Datasheet

SimilarRFQ

D15S24A6GX00LF

Amphenol ICC (FCI)In Stock: 1699D15S24A6GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of D-Sub receptacle connectors is determined by matching critical electrical and mechanical parameters: connector type (receptacle, female sockets), number of positions (15), shell size and layout (2 DA, A), mounting method (through hole), termination type (solder or press-fit), flange configuration, and material compliance. The substitute parts listed below meet the core functional requirements of the L17HTNAHSOL2RM84C through one or more of the following equivalence criteria:

1. Electrical equivalence: Matching or exceeding current and voltage ratings
2. Mechanical equivalence: Identical connector geometry, position count, and shell layout
3. Termination compatibility: Solder or press-fit termination suitable for PCB integration
4. Environmental ratings: Operating temperature ranges suitable for application deployment
5. Compliance certifications: RoHS, REACH, and flammability ratings for regulatory requirements

Parameter Comparison

Engineering Selection Recommendations

Primary substitutes for direct replacement: D15S24A4GV00LF and D15S24A6GX00LF (both from Amphenol ICC FCI series Delta D) are functionally equivalent for applications operating up to 125°C. Both maintain RoHS compliance and provide gold-plated contacts with adequate current ratings for standard signal applications. D15S24A4GV00LF offers mating side screwlock flange, while D15S24A4GX00LF provides housing-shell flange configuration.

HARTING alternatives: Parts 09662516513 and 09662556513 provide higher current capacity (6.5A) and are ROHS3 compliant. These are suitable for applications where enhanced current handling is required. The 09662556513 features gold-plated contacts and is designated as an alternative for corrosive or demanding signal transmission environments.

Temperature-limited substitution: Part 09662117503 (HARTING) supports operating temperatures up to 125°C and meets ROHS3 compliance but lacks voltage rating specification in available data. This part is suitable for applications not exceeding 125°C operating temperature.

Press-fit alternative: Part 747141-2 (TE Connectivity AMPLIMITE HD-20 series) offers press-fit termination as an alternative to solder termination, reducing thermal stress on PCBs during assembly. However, this part is RoHS non-compliant and must only be selected for legacy or non-regulated applications.

Critical limitation: Applications requiring voltage ratings above 300V must use the original L17HTNAHSOL2RM84C (600V rating) or verify that substitute parts meet the specific voltage requirement, as most substitutes are rated at 300V or lack voltage specification.

Frequently Asked Questions (FAQ)

Q: Can D15S24A4GV00LF replace L17HTNAHSOL2RM84C in all applications? A: D15S24A4GV00LF is mechanically and electrically compatible for most signal applications. However, it is rated for 300V maximum, compared to the original part's 600V rating. Use D15S24A4GV00LF only in applications where the operating voltage does not exceed 300V.

Q: What is the difference between the HARTING parts 09662516513 and 09662556513? A: Both parts are functionally identical in electrical and mechanical specifications. The primary difference is contact finish: 09662556513 features gold-plated contacts, while 09662516513 does not specify contact finish. Select 09662556513 for enhanced corrosion resistance in harsh environments or high-reliability applications.

Q: Why does TE Connectivity part 747141-2 use press-fit termination instead of solder? A: Press-fit termination reduces thermal strain on printed circuit boards by eliminating high-temperature solder processing. This method is advantageous for temperature-sensitive PCB assemblies. However, press-fit requires specific PCB pad design and is not directly compatible with solder-optimized board layouts.

Q: Are all substitute parts RoHS compliant? A: No. Part 747141-2 is RoHS non-compliant and is suitable only for applications exempt from RoHS regulations. All other substitutes listed (HARTING and Amphenol FCI Delta D series) are compliant with RoHS or ROHS3 standards.

Q: Which substitute part has the highest current rating? A: HARTING parts 09662516513 and 09662556513 support 6.5A per contact, exceeding the original part's 5A rating. These parts are suitable for applications requiring higher current capacity within the D-Sub 15-position form factor.

Q: What is the maximum operating temperature for substitute parts? A: The original L17HTNAHSOL2RM84C supports -55°C to 150°C. Substitute parts from HARTING and Amphenol FCI Delta D series support -55°C to 125°C, providing a 25°C lower upper temperature limit. For applications exceeding 125°C, the original part remains the only listed option.