L17HTNAGSOL2RM81C D-Sub Receptacle 15 Position Equivalent & Substitute Parts

Part Overview

The L17HTNAGSOL2RM81C is a 15 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets with vertical through-hole solder termination and is designed for signal applications. The part is currently active in production with 1106 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative compliance certifications are required, or when design specifications allow for compatible alternatives from different manufacturers. Substitute parts must maintain compatibility across connector style, position count, mounting type, termination method, and electrical ratings.

Substiute Parts

L17HTNAGSOL2RM81C

Amphenol ICC (Commercial Products)In Stock: 1173L17HTNAGSOL2RM81C Datasheet

Current PartRFQ

09662117503

HARTINGIn Stock: 80409662117503 Datasheet

SimilarRFQ

09662516513

HARTINGIn Stock: 175509662516513 Datasheet

SimilarRFQ

09662556513

HARTINGIn Stock: 70009662556513 Datasheet

SimilarRFQ

747141-2

TE Connectivity AMP ConnectorsIn Stock: 786747141-2 Datasheet

SimilarRFQ

D15S14A6GV00LF

Amphenol ICC (FCI)In Stock: 927D15S14A6GV00LF Datasheet

SimilarRFQ

D15S24A4GV00LF

Amphenol ICC (FCI)In Stock: 35597D15S24A4GV00LF Datasheet

SimilarRFQ

D15S24A4GX00LF

Amphenol ICC (FCI)In Stock: 1199D15S24A4GX00LF Datasheet

SimilarRFQ

D15S24A6GX00LF

Amphenol ICC (FCI)In Stock: 1699D15S24A6GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for D-Sub receptacle connectors is determined by strict alignment of the following parameters:

Critical Parameters (Must Match Exactly):

• Connector style: D-Sub
• Connector type: Receptacle, Female Sockets
• Number of positions: 15
• Number of rows: 2
• Shell size and layout: 2 (DA, A)
• Mounting type: Through Hole
• Termination method: Solder
• Contact type: Signal
• Material flammability rating: UL94 V-0

Compatible Variation Parameters:

• Current rating: Substitute parts with equal or higher current capacity are acceptable
• Voltage rating: Substitute parts with equal or higher voltage rating are acceptable
• Operating temperature range: Substitute parts must support the minimum required temperature range
• Contact finish: Gold or alternative finishes are acceptable if electrical performance is maintained
• Shell material finish: Steel with various plating options (Nickel, Tin, Tin-Nickel) are acceptable
• Flange feature: Mating side female screwlock or housing/shell mounting are both acceptable configurations
• Dielectric material: PBT, PCT, and other thermoplastic materials with glass filling are acceptable

The substitute parts listed below meet all critical parameters and maintain functional compatibility with the L17HTNAGSOL2RM81C.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Solder Termination, Highest Compatibility):

The D15S24A4GV00LF and D15S24A6GX00LF from Amphenol ICC (FCI) Delta D series represent the closest functional equivalents to the L17HTNAGSOL2RM81C. Both parts maintain identical connector geometry, position count, mounting type, and solder termination. These parts are RoHS compliant and carry active product status. The D15S24A4GV00LF offers the highest inventory availability at 35,497 units. Both parts operate within the -55°C to 125°C range, which covers the lower end of the L17HTNAGSOL2RM81C operating range but does not extend to the 150°C maximum.

Secondary Substitutes (HARTING Series):

The HARTING parts 09662516513, 09662117503, and 09662556513 provide functional equivalence with enhanced current ratings of 6.5A compared to the 5A rating of the primary part. These parts are ROHS3 compliant and REACH unaffected. The 09662516513 offers the highest inventory level at 1,655 units among the HARTING options. All three HARTING parts operate within the -55°C to 125°C temperature range.

Alternative with Different Termination (Press-Fit):

The TE Connectivity 747141-2 from the AMPLIMITE HD-20 series provides a D-Sub 15 position receptacle with press-fit termination instead of solder. This part is suitable only for applications where press-fit termination is acceptable. The operating temperature range is -55°C to 105°C, which is more limited than the primary part. This part is RoHS non-compliant and REACH affected.

Compliance Considerations:

For applications requiring RoHS compliance, the Amphenol ICC (FCI) Delta D series parts (D15S24A4GV00LF, D15S24A4GX00LF, D15S24A6GX00LF) and HARTING parts (09662516513, 09662117503, 09662556513) are suitable. The primary part L17HTNAGSOL2RM81C is RoHS non-compliant.

For applications requiring REACH compliance, the HARTING parts and Amphenol ICC (FCI) Delta D series parts with REACH unaffected status are appropriate.

Temperature Range Considerations:

The L17HTNAGSOL2RM81C operates to 150°C. Substitute parts operate to a maximum of 125°C (HARTING and most Amphenol ICC FCI parts) or 105°C (TE Connectivity 747141-2). Applications requiring operation above 125°C cannot use these substitute parts.

Frequently Asked Questions (FAQ)

Q: Can I substitute the L17HTNAGSOL2RM81C with any of the listed parts?

A: Substitution depends on your specific application requirements. All listed parts maintain the critical D-Sub 15 position receptacle configuration with through-hole solder termination. However, differences exist in operating temperature range, compliance certifications, and current ratings. Verify that the substitute part meets your application's temperature, compliance, and electrical requirements before selection.

Q: What is the difference between the HARTING and Amphenol ICC (FCI) substitute options?

A: HARTING parts (09662117503, 09662516513, 09662556513) offer higher current ratings of 6.5A compared to the 5A rating of the primary part and most Amphenol ICC (FCI) alternatives. HARTING parts are ROHS3 compliant and REACH unaffected. Amphenol ICC (FCI) Delta D series parts offer higher inventory availability and are available in both RoHS compliant and ROHS3 compliant versions. Both manufacturers provide UL94 V-0 rated dielectric materials and operate within the -55°C to 125°C range.

Q: Why do some substitute parts have lower maximum operating temperatures?

A: The L17HTNAGSOL2RM81C operates to 150°C due to its specific dielectric material and design. Most substitute parts operate to 125°C or 105°C based on their dielectric material composition and thermal design. If your application requires operation above 125°C, the L17HTNAGSOL2RM81C or equivalent parts with matching temperature ratings must be used.

Q: What is the difference between mating side female screwlock and housing/shell mounting?

A: Mating side female screwlock (M3 or 4-40) provides fastening at the connector mating interface. Housing/shell mounting (4-40) provides fastening through the connector shell to the mounting surface. Both configurations are mechanically compatible with through-hole PCB mounting. Selection depends on your mechanical assembly requirements and available mounting hardware.

Q: Are the Delta D series parts (D15S24A4GV00LF, D15S24A4GX00LF, D15S24A6GX00LF) interchangeable?

A: The three Delta D series parts are functionally equivalent for most applications. D15S24A4GV00LF features mating side female screwlock (4-40) with flash gold plating and is RoHS compliant. D15S24A4GX00LF features housing/shell mounting (4-40) with flash gold plating and is ROHS3 compliant. D15S24A6GX00LF features housing/shell mounting (4-40) with 30.0µin gold plating and is RoHS compliant. Selection depends on your specific mounting configuration and compliance requirements.

Q: What does RoHS non-compliant mean for the primary part?

A: RoHS non-compliant indicates that the L17HTNAGSOL2RM81C may contain restricted substances such as lead, mercury, cadmium, or hexavalent chromium above specified thresholds. If your application or market requires RoHS compliance, substitute parts with RoHS compliant or ROHS3 compliant status must be selected.

Q: Can I use the TE Connectivity 747141-2 as a substitute?

A: The TE Connectivity 747141-2 is functionally equivalent in terms of connector geometry and position count. However, it uses press-fit termination instead of solder termination. This part is suitable only if your PCB design and assembly process support press-fit termination. Additionally, its maximum operating temperature of 105°C is lower than most other substitutes. This part is RoHS non-compliant and REACH affected.

Q: What inventory levels are available for each substitute part?

A: D15S24A4GV00LF offers the highest availability at 35,497 units. 09662516513 (HARTING) provides 1,655 units. D15S24A6GX00LF provides 1,633 units. L17HTNAGSOL2RM81C (primary part) has 1,106 units. 09662556513 (HARTING) has 678 units. 747141-2 (TE Connectivity) has 721 units. 09662117503 (HARTING) has 787 units. D15S14A6GV00LF has 843 units. Inventory levels are subject to change and should be confirmed with your supplier.

Q: Are all substitute parts rated for 600V operation?

A: No. The L17HTNAGSOL2RM81C is rated for 600V. Most substitute parts from Amphenol ICC (FCI) Delta D series are rated for 300V. HARTING parts and TE Connectivity 747141-2 do not specify voltage ratings in the provided data. For applications requiring 600V operation, verify that the selected substitute part meets this requirement or confirm that a lower voltage rating is acceptable for your application.