L17DAFRBA15P D-Sub Plug 15 Position IDC Connector Equivalent & Substitute Parts

Part Overview

The L17DAFRBA15P is a 15 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) in the DFR series. This connector features male pins with IDC (Insulation Displacement Contact) termination for ribbon cable applications. The part is actively produced and maintains 981 pieces in current inventory stock.

The L17DAFRBA15P is designed for free hanging in-line mounting applications with cable-side M3 flange features. Substitute parts are necessary when application requirements differ in mounting configuration, such as panel mount installations, or when alternative manufacturer sourcing is required for supply chain continuity.

Substiute Parts

L17DAFRBA15P

Amphenol ICC (Commercial Products)In Stock: 1082L17DAFRBA15P Datasheet

Current PartRFQ

8215-6000

3MIn Stock: 8058215-6000 Datasheet

SimilarRFQ

8215-6003

3MIn Stock: 12678215-6003 Datasheet

SimilarRFQ

8215-6009

3MIn Stock: 11368215-6009 Datasheet

SimilarRFQ

8215-8000

3MIn Stock: 9028215-8000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L17DAFRBA15P is determined by the following core parameters that must remain constant across all equivalent parts:

Fixed Parameters (Must Match):

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Termination: IDC, Ribbon Cable
• Shell Material, Finish: Steel, Tin Plated
• Contact Finish: Gold
• Material Flammability Rating: UL94 V-0
• Operating Temperature: -55°C ~ 105°C

Variable Parameters (May Differ):

• Mounting Type: Free Hanging (In-Line) vs. Panel Mount
• Flange Feature: Cable Side (M3) vs. Housing/Shell configurations
• Current Rating: 3A (main part) vs. 1A (substitute parts)
• Contact Finish Thickness: Flash vs. 30.0µin (0.76µm)
• Contact Material: Brass vs. Copper Alloy
• Dielectric Material composition variations
• Packaging: Tray vs. Bulk
• Compliance certifications: RoHS vs. ROHS3

The four substitute parts (8215-6000, 8215-6003, 8215-6009, 8215-8000) from 3M's 8200 series maintain all fixed parameters while differing in mounting configuration (panel mount instead of free hanging), flange attachment method, and current rating specifications.

Parameter Comparison

Engineering Selection Recommendations

L17DAFRBA15P Selection Criteria: The L17DAFRBA15P is the primary choice for free hanging in-line cable-side mounting applications. This part carries RoHS Compliant certification and maintains a 3A current rating with 250V voltage specification. The flash gold contact finish and brass contact material are specified for this configuration. Current inventory of 981 pieces supports immediate availability.

3M 8215 Series Substitute Selection:

8215-6000 and 8215-6009: These parts are functionally equivalent for panel mount applications requiring unthreaded housing/shell flange attachment. Both maintain ROHS3 Compliant status. The 8215-6009 is packaged in bulk format (1027 pieces in stock), while 8215-6000 is tray packaged (768 pieces in stock). Both feature REACH Unaffected or Vendor Undefined status.

8215-6003: This part is specified for panel mount applications with 4-40 threaded housing/shell flange attachment. It carries ROHS3 Compliant certification with REACH Affected status. Inventory of 1175 pieces is available in tray packaging.

8215-8000: This part is configured for panel mount applications with unthreaded housing/shell flange attachment in bulk packaging (880 pieces in stock). ROHS3 Compliant with Vendor Undefined REACH status.

Current Rating Consideration: All 3M substitute parts are rated at 1A, compared to the 3A rating of the L17DAFRBA15P. Applications requiring the full 3A current capacity must retain the L17DAFRBA15P.

Compliance Note: The L17DAFRBA15P carries RoHS Compliant status, while all 3M substitutes carry ROHS3 Compliant status. Both certifications are current regulatory standards.

Frequently Asked Questions (FAQ)

Q: Can the 3M 8215 series parts directly replace the L17DAFRBA15P in free hanging in-line applications?

A: No. The 3M 8215 series parts are configured for panel mount installations. The L17DAFRBA15P is designed for free hanging in-line mounting with cable-side M3 flange features. Mounting configuration differences prevent direct substitution in the same mechanical installation.

Q: What is the significance of the current rating difference between L17DAFRBA15P (3A) and the 3M substitutes (1A)?

A: The current rating specifies the maximum continuous current the connector contacts can safely carry. Applications requiring current levels above 1A must use the L17DAFRBA15P. Applications operating at or below 1A can use either part.

Q: Are the 3M 8215 series parts electrically compatible with the L17DAFRBA15P?

A: Yes, for electrical signal transmission. Both maintain identical D-Sub 15 position configuration, IDC ribbon cable termination, gold contact finish, UL94 V-0 flammability rating, and -55°C to 105°C operating temperature range. Electrical compatibility is established through these shared parameters.

Q: What is the difference between 8215-6000, 8215-6003, 8215-6009, and 8215-8000?

A: The primary differences are:

• 8215-6000 and 8215-6009: Unthreaded housing/shell flange. 8215-6000 is tray packaged; 8215-6009 is bulk packaged.
• 8215-6003: 4-40 threaded housing/shell flange for screw-mount panel installations.
• 8215-8000: Unthreaded housing/shell flange in bulk packaging.

All four parts share identical electrical specifications and operating temperature range.

Q: Does packaging format (Tray vs. Bulk) affect connector performance?

A: No. Packaging format affects only handling, storage, and ordering quantities. Connector electrical and mechanical performance is identical regardless of packaging type.

Q: What does the contact finish thickness difference (Flash vs. 30.0µin) indicate?

A: Contact finish thickness affects contact durability and wear resistance. The L17DAFRBA15P uses flash gold plating, while 3M parts use 30.0µin (0.76µm) gold plating. Both provide gold contact finish for signal integrity; the thickness difference reflects different manufacturing specifications.

Q: Are the RoHS Compliant and ROHS3 Compliant certifications equivalent?

A: Both certifications indicate compliance with current Restriction of Hazardous Substances regulations. ROHS3 represents the current regulatory version. Both certifications are acceptable for modern applications.

Q: Can I use the 3M 8215 series in applications where the L17DAFRBA15P is currently installed?

A: Only if the application can accommodate panel mount configuration instead of free hanging in-line mounting, and if current requirements do not exceed 1A. Mechanical mounting compatibility must be verified before substitution.