L117DAFRDA15P D-Sub Plug 15 Position IDC Connector Equivalent & Substitute Parts

Part Overview

The L117DAFRDA15P is a 15 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) in the DFR series. This free hanging, in-line connector features IDC ribbon cable termination and is designed for signal applications requiring 5A current capacity at 250V. The connector is actively produced and RoHS compliant, making it suitable for industrial and commercial electronic assemblies. Substitute parts are identified when original inventory is unavailable, when alternative mounting configurations are required, or when packaging specifications differ from application requirements.

Substiute Parts

L117DAFRDA15P

Amphenol ICC (Commercial Products)In Stock: 837L117DAFRDA15P Datasheet

Current PartRFQ

8215-6000

3MIn Stock: 8058215-6000 Datasheet

SimilarRFQ

8215-6003

3MIn Stock: 12678215-6003 Datasheet

SimilarRFQ

8215-6009

3MIn Stock: 11368215-6009 Datasheet

SimilarRFQ

8215-8000

3MIn Stock: 9028215-8000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the L117DAFRDA15P are identified from the 3M 8200 series (part numbers 8215-6000, 8215-6003, 8215-6009, 8215-8000). Substitution eligibility is determined by the following critical parameters that must match or be compatible with the main part:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Termination: IDC, Ribbon Cable
• Contact Type: Signal
• Material Flammability Rating: UL94 V-0

Parameters with Acceptable Variation:

• Mounting Type: Substitute parts use Panel Mount instead of Free Hanging (In-Line). This represents a different mechanical interface but maintains electrical compatibility with the ribbon cable termination.
• Current Rating: Substitute parts are rated at 1A, which is lower than the main part's 5A rating. This represents a derating and requires application-level verification.
• Operating Temperature: Substitute parts operate at -55°C ~ 105°C, which is a narrower range than the main part's -40°C ~ 125°C.
• Contact Finish Thickness: Substitute parts have 30.0µin (0.76µm) versus the main part's 15.0µin (0.38µm).
• Shell Material Finish: Substitute parts use Tin Plated instead of Nickel Plated.

All substitute parts maintain RoHS compliance and UL94 V-0 flammability rating, ensuring regulatory compatibility.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The L117DAFRDA15P remains the preferred choice when free hanging, in-line mounting is required and 5A current capacity is necessary. This connector is actively produced, RoHS compliant, and maintains the specified operating temperature range of -40°C ~ 125°C.

Substitute Selection Conditions:

The 3M 8200 series connectors (8215-6000, 8215-6003, 8215-6009, 8215-8000) are electrically and mechanically compatible substitutes when the following conditions are met:

1. Mounting Configuration Change: The application can accommodate panel mount installation instead of free hanging, in-line mounting. The connector interface (D-Sub, 15 position, 2 row, DA/A shell size) remains identical.

2. Current Derating: The application current requirement does not exceed 1A. The substitute parts are rated at 1A versus the main part's 5A rating.

3. Temperature Range Adjustment: The operating environment remains within -55°C ~ 105°C. Applications requiring operation above 105°C or below -55°C must use the main part.

4. Regulatory Compliance: All substitute parts maintain ROHS3 compliance and UL94 V-0 flammability rating, satisfying regulatory requirements equivalent to the main part.

Packaging Considerations:

• 8215-6000 and 8215-6003 are supplied in Tray packaging, matching the main part's packaging format.
• 8215-6009 and 8215-8000 are supplied in Bulk packaging, suitable for high-volume assembly operations.

Surface Finish Differences:

Substitute parts use Tin Plated shell finish with thicker gold contact plating (30.0µin versus 15.0µin). These finishes are compatible with standard D-Sub mating connectors and do not affect electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the 3M 8215 series connectors directly replace the L117DAFRDA15P in existing assemblies?

A: Direct replacement depends on mounting configuration. The L117DAFRDA15P uses free hanging, in-line mounting, while all 3M 8215 series substitutes use panel mount. If the assembly is designed for panel mount installation, substitution is feasible. If in-line mounting is required, the main part must be used.

Q: What is the impact of the 1A current rating on the 3M 8215 series substitutes?

A: The 1A rating represents a derating from the main part's 5A specification. Applications with current requirements exceeding 1A per contact must use the L117DAFRDA15P. Applications with current requirements at or below 1A can use the substitute parts without electrical limitation.

Q: Are there differences in connector mating compatibility between the main part and substitutes?

A: No. Both the L117DAFRDA15P and all 3M 8215 series substitutes use identical D-Sub shell size 2 (DA, A) with 15 positions in 2 rows. They mate with standard D-Sub receptacles designed for this configuration.

Q: How do the operating temperature ranges differ?

A: The L117DAFRDA15P operates from -40°C ~ 125°C. The 3M 8215 series substitutes operate from -55°C ~ 105°C. The substitute range is wider at the low end (-55°C versus -40°C) but narrower at the high end (105°C versus 125°C). Applications requiring operation above 105°C must use the main part.

Q: What is the difference between Tray and Bulk packaging options?

A: Tray packaging (8215-6000, 8215-6003) provides organized component presentation suitable for manual assembly and smaller production runs. Bulk packaging (8215-6009, 8215-8000) is optimized for automated assembly equipment and high-volume manufacturing. Both packaging types contain the same connector specifications.

Q: Do the substitute parts meet the same regulatory standards as the main part?

A: Yes. All substitute parts are ROHS3 compliant and rated UL94 V-0 for flammability, meeting or exceeding the regulatory requirements of the L117DAFRDA15P. Moisture sensitivity level (MSL 1, Unlimited) is identical across all parts.

Q: What is the significance of the different shell finish materials?

A: The L117DAFRDA15P uses Nickel Plated finish, while 3M 8215 series substitutes use Tin Plated finish. Both finishes provide corrosion resistance and are compatible with standard D-Sub mating connectors. The choice between finishes is typically driven by environmental exposure and cost considerations rather than electrical performance.

Q: Can the 3M 8215-6003 be used instead of 8215-6000 or 8215-6009?

A: Yes, with one consideration. The 8215-6003 has a Housing/Shell (4-40) flange feature, while 8215-6000 and 8215-6009 have Housing/Shell (Unthreaded) flanges. The 4-40 threaded flange allows mechanical fastening to panel cutouts. Selection depends on the panel mount installation method required by the application.