L117DAFRBA15P D-Sub Plug Connector Equivalent & Substitute Parts

Part Overview

The L117DAFRBA15P is a 15-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) in the DFR series. This connector features male pins, IDC ribbon cable termination, and free-hanging in-line mounting. The part is currently active in production with 1031 units in stock.

D-Sub connectors of this configuration are widely used in industrial control systems, data acquisition equipment, and legacy computing applications. Substitute parts become necessary when the original manufacturer part is unavailable, when alternative mounting configurations are required for specific application layouts, or when inventory constraints necessitate cross-manufacturer sourcing.

Substiute Parts

L117DAFRBA15P

Amphenol ICC (Commercial Products)In Stock: 1087L117DAFRBA15P Datasheet

Current PartRFQ

8215-6000

3MIn Stock: 8058215-6000 Datasheet

SimilarRFQ

8215-6003

3MIn Stock: 12678215-6003 Datasheet

SimilarRFQ

8215-6009

3MIn Stock: 11368215-6009 Datasheet

SimilarRFQ

8215-8000

3MIn Stock: 9028215-8000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L117DAFRBA15P is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Termination: IDC, Ribbon Cable
• Contact Type: Signal
• Material Flammability Rating: UL94 V-0
• Operating Temperature Range: -55°C ~ 105°C

Allowable Variations:

• Mounting Type: The L117DAFRBA15P uses free-hanging in-line mounting. Substitute parts may employ panel mount configurations, which represent a different mechanical interface but maintain electrical compatibility when the connector is properly integrated into the application assembly.
• Current Rating: The L117DAFRBA15P is rated at 3A. Substitute parts rated at 1A represent a reduced current capacity and are suitable only for applications where circuit current does not exceed 1A.
• Contact Finish Thickness: The L117DAFRBA15P specifies 15.0µin (0.38µm). Substitute parts with 30.0µin (0.76µm) provide enhanced contact durability and are electrically compatible.
• Shell Material Contact: The L117DAFRBA15P uses brass contacts. Substitute parts using copper alloy contacts are functionally equivalent for signal transmission.
• Dielectric Material: The L117DAFRBA15P uses thermoplastic glass-filled material. Substitute parts using polybutylene terephthalate (PBT) polyester glass-filled material maintain equivalent electrical and mechanical properties.

The four substitute parts listed (8215-6000, 8215-6003, 8215-6009, 8215-8000) all satisfy these criteria and are therefore electrically and mechanically compatible with the L117DAFRBA15P in applications where the mounting configuration change is accommodated.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The L117DAFRBA15P remains the preferred choice when free-hanging in-line mounting is required and circuit current requirements reach 3A. This part is RoHS Compliant and maintains active production status with adequate inventory availability.

Substitute Selection Based on Application Requirements:

For applications requiring panel mount configuration with current ≤ 1A:

The 3M 8215 series parts (8215-6000, 8215-6003, 8215-6009, 8215-8000) are electrically and mechanically equivalent substitutes. All four parts are ROHS3 Compliant, maintain the required UL94 V-0 flammability rating, and operate across the identical temperature range (-55°C ~ 105°C).

Differentiation among 3M substitute parts:

• 8215-6000: Panel mount with unthreaded housing flange. Tray packaging. REACH status vendor undefined.
• 8215-6003: Panel mount with 4-40 threaded housing flange. Tray packaging. REACH Affected designation.
• 8215-6009: Panel mount with unthreaded housing flange. Bulk packaging. REACH Unaffected designation.
• 8215-8000: Panel mount with unthreaded housing flange. Bulk packaging. REACH status vendor undefined.

Selection among these four parts depends on mechanical mounting requirements (threaded vs. unthreaded flange), packaging format preference (tray vs. bulk), and regulatory compliance documentation needs (REACH status).

Current Rating Limitation:

All 3M substitute parts are rated at 1A maximum current. Applications requiring sustained current above 1A must retain the L117DAFRBA15P or identify alternative substitutes with 3A current rating.

Frequently Asked Questions (FAQ)

Q: Can the 3M 8215 series parts directly replace the L117DAFRBA15P in existing assemblies?

A: Electrical compatibility is confirmed. However, the 3M parts employ panel mount configuration while the L117DAFRBA15P uses free-hanging in-line mounting. Physical integration into the assembly must be evaluated. If the application accommodates panel mount installation, direct substitution is feasible. If the assembly requires in-line mounting, mechanical redesign is necessary.

Q: What is the significance of the current rating difference (3A vs. 1A)?

A: The L117DAFRBA15P is rated for continuous current up to 3A per contact. The 3M 8215 series parts are rated for 1A maximum. Substitution is valid only for applications where circuit current does not exceed 1A. Applications requiring higher current must retain the L117DAFRBA15P or source alternative parts with equivalent or higher current ratings.

Q: Are the contact finish thickness differences (15.0µin vs. 30.0µin) significant?

A: The 3M parts feature thicker gold plating (30.0µin vs. 15.0µin). This provides enhanced contact durability and corrosion resistance. The thicker plating does not compromise electrical performance and is compatible with the L117DAFRBA15P in mated connector pairs.

Q: What is the difference between the four 3M substitute parts?

A: All four parts (8215-6000, 8215-6003, 8215-6009, 8215-8000) are electrically identical. Differences are mechanical and logistical: 8215-6003 features a 4-40 threaded flange for secure panel mounting; 8215-6000 and 8215-6009 use unthreaded flanges; 8215-6009 and 8215-8000 are supplied in bulk packaging while 8215-6000 and 8215-6003 are supplied in trays. Selection depends on mounting method preference and packaging requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. The L117DAFRBA15P is RoHS Compliant. All four 3M substitute parts are ROHS3 Compliant, which represents an updated RoHS certification standard. Both designations confirm compliance with hazardous substance restrictions.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All parts listed (L117DAFRBA15P and all 3M substitutes) carry this designation.

Q: Can I use the 3M parts in applications requiring the full 3A current rating?

A: No. The 3M 8215 series parts are rated at 1A maximum. Using these parts in circuits exceeding 1A will exceed the component's electrical rating and create reliability and safety risks. The L117DAFRBA15P must be retained for 3A applications.

Q: What is the difference between tray and bulk packaging?

A: Tray packaging (L117DAFRBA15P, 8215-6000, 8215-6003) organizes components in individual compartments for protection and organized handling. Bulk packaging (8215-6009, 8215-8000) supplies components in larger quantities without individual compartmentalization. Packaging choice affects handling procedures and inventory management but does not affect component performance.