L0806C220KDWIT Equivalent & Substitute Parts

Part Overview

The L0806C220KDWIT is a 22 µH unshielded wirewound inductor manufactured by KEMET, designed for surface mount applications in the 0806 (2016 Metric) package format. This component is rated for 240 mA continuous current with a saturation current of 250 mA and features a DC resistance of 1.8 Ohm across an operating temperature range of -40°C to 105°C.

The L0806C220KDWIT is classified as obsolete. Identification of equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications.

Substiute Parts

L0806C220KDWIT

KEMETIn Stock: 1217L0806C220KDWIT Datasheet

Current PartRFQ

LLQPA201616T220K

Taiyo YudenIn Stock: 846LLQPA201616T220K Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L0806C220KDWIT is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 22 µH
• Inductance tolerance: ±10%
• Current rating: 240 mA minimum
• Saturation current: 250 mA minimum
• DC resistance: 1.8 Ohm nominal
• Self resonant frequency: 16 MHz

Physical Parameters:

• Package format: 0806 (2016 Metric)
• Mounting type: Surface Mount
• Core material: Ferrite
• Shielding configuration: Unshielded

Compliance Parameters:

• RoHS3 compliance required
• Operating temperature range: -40°C to 105°C

Substitute parts must match all electrical specifications within stated tolerances, maintain identical physical dimensions and mounting characteristics, and satisfy all regulatory compliance requirements. Parts meeting these criteria are classified as parametric equivalents.

Parameter Comparison

Engineering Selection Recommendations

The LLQPA201616T220K manufactured by Taiyo Yuden is a parametric equivalent to the obsolete L0806C220KDWIT. Both components satisfy identical electrical and mechanical specifications across all critical parameters.

Product Status Consideration: The L0806C220KDWIT is classified as obsolete, while the LLQPA201616T220K is classified as active. Selection of the active component ensures continued availability and supply chain stability.

Compliance Status: Both components are ROHS3 compliant and satisfy equivalent regulatory requirements. The LLQPA201616T220K carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling.

Packaging Availability: The LLQPA201616T220K is available in Tape & Reel (TR) packaging format, suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the LLQPA201616T220K be used as a direct replacement for the L0806C220KDWIT?

A: Yes. Both components are parametric equivalents with identical inductance values, current ratings, DC resistance, core material, package dimensions, and operating temperature ranges. Direct substitution is supported at the circuit level.

Q: Are there any differences in electrical performance between these components?

A: No. The electrical specifications are identical across inductance, tolerance, current rating, saturation current, DC resistance, and self resonant frequency. Both components operate within the same frequency and temperature parameters.

Q: What is the significance of the 0806 (2016 Metric) package designation?

A: The 0806 package is a surface mount inductor format with dimensions of 2.00 mm length by 1.60 mm width and a maximum seated height of 1.80 mm. Both components use this identical package format, ensuring mechanical compatibility with existing PCB layouts and assembly equipment.

Q: Does the LLQPA201616T220K require different handling procedures?

A: The LLQPA201616T220K carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity. Standard handling procedures for surface mount components apply without additional moisture control requirements.

Q: Are both components suitable for the same operating temperature applications?

A: Yes. Both components are rated for operation across the identical temperature range of -40°C to 105°C, supporting equivalent thermal performance in target applications.

Q: What is the difference between the L-DWI series and the LLQPA series?

A: These designations identify the manufacturer series classifications. The L-DWI series is KEMET's product line, while the LLQPA series is Taiyo Yuden's product line. Series designation does not affect electrical or mechanical equivalence when parametric specifications are identical.