L0806C1R5MDMIT Equivalent & Substitute Parts

Part Overview

The L0806C1R5MDMIT is a 1.5 µH shielded multilayer ferrite inductor manufactured by KEMET, designed for surface mount applications in the 0806 (2016 Metric) package. This component is rated for 1.2 A continuous current with a maximum DC resistance of 130mOhm and operates across the temperature range of -40°C to 85°C. The part is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure supply chain availability for new production and repair applications.

Substiute Parts

L0806C1R5MDMIT

KEMETIn Stock: 794L0806C1R5MDMIT Datasheet

Current PartRFQ

MLP2016H1R5MT0S1

TDK CorporationIn Stock: 6310MLP2016H1R5MT0S1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L0806C1R5MDMIT is determined by strict equivalence across the following critical parameters:

Inductance Value: 1.5 µH nominal with ±20% tolerance band Current Rating: 1.2 A minimum continuous current capacity Package Footprint: 0806 (2016 Metric) surface mount form factor Shielding Configuration: Shielded multilayer construction Core Material: Ferrite composition DC Resistance: Maximum 130mOhm specification Compliance Standards: ROHS3 compliance and REACH unaffected status

The substitute part MLP2016H1R5MT0S1 from TDK Corporation meets all specified electrical and mechanical parameters within the defined tolerance bands. The substitute maintains identical inductance, current rating, package dimensions, and shielding characteristics. Compliance certifications align with the original component specifications.

Parameter Comparison

Engineering Selection Recommendations

The MLP2016H1R5MT0S1 from TDK Corporation is a direct functional equivalent to the obsolete L0806C1R5MDMIT. Selection of this substitute is supported by the following factors:

Electrical Equivalence: The substitute maintains identical inductance value, current rating, and tolerance specifications. The DC resistance of 137.5mOhm is within acceptable operational limits relative to the original 130mOhm specification, representing a 5.8% increase that remains within the ±20% tolerance band of the inductance specification.

Mechanical Compatibility: Both components share identical package dimensions, footprint, and height specifications for the 0806 (2016 Metric) form factor, ensuring direct PCB layout compatibility without redesign.

Compliance Status: The substitute part maintains ROHS3 compliance and REACH unaffected status, matching the regulatory requirements of the original component.

Product Availability: The substitute is classified as active with confirmed inventory availability, addressing the supply chain limitation of the obsolete original part.

Temperature Performance: The substitute operates across -40°C to 125°C, exceeding the original operating range of -40°C to 85°C, providing enhanced thermal margin for applications within the original temperature specification.

Frequently Asked Questions (FAQ)

Q: Can the MLP2016H1R5MT0S1 be used as a direct replacement for the L0806C1R5MDMIT without PCB modifications?

A: Yes. Both components share identical package dimensions, footprint, and height specifications for the 0806 (2016 Metric) surface mount package. No PCB layout modifications are required for mechanical or electrical integration.

Q: What is the significance of the DC resistance difference between the original and substitute parts?

A: The original part specifies 130mOhm maximum DC resistance, while the substitute specifies 137.5mOhm maximum. This 7.5mOhm difference represents a 5.8% increase and remains within acceptable operational parameters for inductor applications. Both values fall within the ±20% tolerance band of the inductance specification.

Q: Are there compliance or regulatory differences between the two parts?

A: No. Both the L0806C1R5MDMIT and MLP2016H1R5MT0S1 are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements for electronic component applications.

Q: Does the extended operating temperature range of the substitute affect compatibility?

A: No. The substitute operates from -40°C to 125°C, which encompasses the original operating range of -40°C to 85°C. The extended upper temperature limit provides additional thermal margin without affecting performance within the original specification range.

Q: What packaging format is available for the substitute part?

A: The MLP2016H1R5MT0S1 is supplied in Tape & Reel (TR) format, standard for high-volume surface mount production. The original L0806C1R5MDMIT was supplied in standard packaging format.

Q: Are the inductance test frequencies different between the parts?

A: Yes. The original part specifies inductance testing at 1 MHz, while the substitute specifies testing at 2 MHz. Both test frequencies are within standard industry practice for multilayer inductor characterization. The inductance value of 1.5 µH with ±20% tolerance remains valid across both test frequencies for practical circuit applications.

Q: What is the moisture sensitivity classification for the substitute part?

A: The MLP2016H1R5MT0S1 carries MSL 1 (Unlimited) classification, identical to the original part. This indicates minimal moisture sensitivity and no special storage or handling requirements beyond standard component practices.