L0806B820JSWST Equivalent & Substitute Parts

Part Overview

The L0806B820JSWST is a 82 µH unshielded drum core wirewound inductor manufactured by KEMET in the 0806 (2016 Metric) surface mount package. This component is rated for 85 mA continuous current with a DC resistance of 7.7 Ohm and operates across the temperature range of -40°C to 105°C. The part carries an Obsolete product status, necessitating identification of functionally equivalent alternatives for ongoing design support and production continuity.

Substiute Parts

L0806B820JSWST

KEMETIn Stock: 1900L0806B820JSWST Datasheet

Current PartRFQ

LBM2016T820J

Taiyo YudenIn Stock: 2070LBM2016T820J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L0806B820JSWST is determined by strict equivalence across the following electrical and mechanical parameters:

Electrical Parameters:

• Inductance value: 82 µH
• Inductance tolerance: ±5%
• Current rating: 85 mA minimum
• DC resistance: 7.7 Ohm
• Core material: Ferrite
• Shielding configuration: Unshielded
• Operating temperature range: -40°C ~ 105°C minimum

Mechanical Parameters:

• Package / Case: 0806 (2016 Metric)
• Mounting type: Surface Mount
• Physical dimensions: 0.079" L x 0.063" W (2.00mm x 1.60mm)
• Maximum seated height: 0.071" (1.80mm)

Compliance Parameters:

• RoHS3 compliance
• Moisture Sensitivity Level 1

Substitute parts must satisfy all electrical specifications, maintain identical package geometry, and meet or exceed all compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The LBM2016T820J manufactured by Taiyo Yuden is a direct electrical and mechanical equivalent to the L0806B820JSWST. Both components satisfy identical specifications across inductance, current rating, DC resistance, package geometry, and operating temperature range.

Product Status Consideration: The L0806B820JSWST carries an Obsolete status, while the LBM2016T820J is designated as Not For New Designs. For new design implementations, component selection should prioritize parts with active production status. For legacy system support and maintenance applications, the LBM2016T820J provides functional continuity with the original specification.

Compliance Alignment: Both parts maintain ROHS3 compliance, REACH Unaffected status, and identical moisture sensitivity ratings, ensuring regulatory and environmental compatibility across substitution.

Packaging Consideration: The L0806B820JSWST is supplied in Cut Tape (CT) packaging, while the LBM2016T820J is supplied in Tape & Reel (TR) format. Packaging format selection depends on production volume and assembly process requirements.

Frequently Asked Questions (FAQ)

Q: Can the LBM2016T820J replace the L0806B820JSWST in existing designs?

A: Yes. The LBM2016T820J meets all electrical specifications (82 µH inductance, 85 mA current rating, 7.7 Ohm DCR) and maintains identical package geometry (0806 / 2016 Metric), physical dimensions, and operating temperature range. Both components are unshielded ferrite drum core wirewound inductors with ±5% tolerance.

Q: Are there differences in Q factor between these parts?

A: The LBM2016T820J specifies Q @ 2.52 MHz as 20. The L0806B820JSWST does not provide a Q factor specification in the available data. Both parts are tested at the same frequency (2.52 MHz) and share identical self-resonant frequency (10 MHz).

Q: What is the impact of packaging format differences?

A: The L0806B820JSWST is supplied in Cut Tape (CT) format, suitable for manual or low-volume assembly. The LBM2016T820J is supplied in Tape & Reel (TR) format, optimized for high-volume automated assembly. Component electrical and mechanical performance is identical; packaging selection depends on production methodology and volume requirements.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the L0806B820JSWST and LBM2016T820J are ROHS3 compliant, REACH Unaffected, and carry Moisture Sensitivity Level 1 (Unlimited). Both parts meet current environmental and regulatory requirements.

Q: Can these inductors be used interchangeably in PCB layouts?

A: Yes. Both components share identical package designation (0806 / 2016 Metric), physical dimensions (0.079" L x 0.063" W / 2.00mm x 1.60mm), and maximum seated height (0.071" / 1.80mm). PCB footprints and assembly processes require no modification.