L0806B1R5JSWST Equivalent & Substitute Parts

Part Overview

The L0806B1R5JSWST is a 1.5 µH unshielded drum core wirewound inductor manufactured by KEMET, designed for surface mount applications in the 0806 (2016 Metric) package. This component is rated for 350 mA continuous current with a DC resistance of 470 mOhm and operates across the temperature range of -40°C to 105°C.

The L0806B1R5JSWST carries an Obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this inductor specification.

Substiute Parts

L0806B1R5JSWST

KEMETIn Stock: 2710L0806B1R5JSWST Datasheet

Current PartRFQ

LBM2016T1R5J

Taiyo YudenIn Stock: 2218LBM2016T1R5J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L0806B1R5JSWST is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 1.5 µH
• Inductance tolerance: ±5%
• Current rating: 350 mA minimum
• DC resistance: 470 mOhm
• Self resonant frequency: 135 MHz
• Test frequency: 7.96 MHz

Mechanical & Physical Parameters:

• Package / Case: 0806 (2016 Metric)
• Core type: Ferrite drum core, wirewound
• Shielding configuration: Unshielded
• Mounting type: Surface mount
• Physical dimensions: 0.079" L x 0.063" W (2.00mm x 1.60mm)
• Maximum seated height: 0.071" (1.80mm)

Compliance & Environmental Parameters:

• Operating temperature range: -40°C to 105°C
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts must satisfy all electrical specifications, maintain identical package geometry, and meet or exceed all environmental and compliance ratings. Packaging format (Cut Tape vs. Tape & Reel) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

LBM2016T1R5J (Taiyo Yuden) as Primary Substitute:

The LBM2016T1R5J is electrically and mechanically equivalent to the L0806B1R5JSWST across all specified parameters. Both components share identical inductance, current rating, DC resistance, package dimensions, and operating temperature range. Both meet ROHS3 compliance and carry MSL 1 (Unlimited) moisture sensitivity ratings.

The LBM2016T1R5J carries a "Not For New Designs" product status, indicating it remains available for production support and replacement applications. This status, combined with full electrical and mechanical equivalence, establishes it as a direct substitute for the obsolete L0806B1R5JSWST.

The primary distinction between these parts is packaging format: the L0806B1R5JSWST is supplied in Cut Tape (CT) format, while the LBM2016T1R5J is supplied in Tape & Reel (TR) format. This difference does not affect component performance or PCB assembly compatibility.

Frequently Asked Questions (FAQ)

Q: Can the LBM2016T1R5J be used as a direct replacement for the L0806B1R5JSWST?

A: Yes. The LBM2016T1R5J meets all electrical specifications (1.5 µH inductance, 350 mA current rating, 470 mOhm DCR) and maintains identical physical dimensions (0806/2016 Metric package). Both components are unshielded ferrite drum core wirewound inductors with matching operating temperature ranges and compliance certifications.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging supplies components on individual tape segments, typically for lower-volume or manual assembly applications. Tape & Reel (TR) packaging supplies components on continuous reels, optimized for automated pick-and-place assembly. Both packaging formats contain identical components with no electrical or mechanical differences.

Q: Are there any performance differences between the KEMET and Taiyo Yuden inductors?

A: Both inductors meet the same electrical specifications. The Taiyo Yuden LBM2016T1R5J specifies a Q factor of 30 @ 7.96 MHz, while the KEMET L0806B1R5JSWST does not provide a Q specification. This additional data point does not indicate a performance difference; it reflects different manufacturer documentation practices.

Q: Will the LBM2016T1R5J fit in PCB layouts designed for the L0806B1R5JSWST?

A: Yes. Both components use the 0806 (2016 Metric) package with identical footprint dimensions: 0.079" L x 0.063" W (2.00mm x 1.60mm) and maximum seated height of 0.071" (1.80mm). PCB layouts and assembly processes require no modification.

Q: What compliance certifications apply to both parts?

A: Both the L0806B1R5JSWST and LBM2016T1R5J are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings. Both are classified under ECCN EAR99 and HTSUS 8504.50.8000.