L0806B101JSWST Equivalent & Substitute Parts

Part Overview

The L0806B101JSWST is a 100 µH unshielded drum core wirewound inductor manufactured by KEMET, designed for surface mount applications in the 0806 (2016 Metric) package. This component operates at 80 mA current rating with 8 Ohm DC resistance and is rated for -40°C to 105°C operating temperature range.

The L0806B101JSWST carries an Obsolete product status. Locating equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this inductor specification.

Substiute Parts

L0806B101JSWST

KEMETIn Stock: 1303L0806B101JSWST Datasheet

Current PartRFQ

LBM2016T101J

Taiyo YudenIn Stock: 2453LBM2016T101J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L0806B101JSWST is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Inductance: 100 µH
• Tolerance: ±5%
• Current Rating: 80 mA
• DC Resistance: 8 Ohm
• Self Resonant Frequency: 9 MHz
• Test Frequency: 796 kHz

Mechanical Parameters (Must Match):

• Package / Case: 0806 (2016 Metric)
• Mounting Type: Surface Mount
• Core Type: Drum Core, Wirewound
• Core Material: Ferrite
• Shielding: Unshielded

Environmental & Compliance Parameters (Must Match):

• Operating Temperature Range: -40°C ~ 105°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part LBM2016T101J meets all critical electrical, mechanical, and environmental parameters required for direct substitution with the L0806B101JSWST.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: LBM2016T101J (Taiyo Yuden)

The LBM2016T101J is the qualified equivalent substitute for the L0806B101JSWST. Both components share identical electrical specifications (100 µH inductance, 80 mA current rating, 8 Ohm DCR), mechanical form factor (0806 / 2016 Metric package), and environmental operating parameters (-40°C ~ 105°C).

Both parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard PCB assembly and storage protocols.

The primary distinction between these parts is product lifecycle status: the L0806B101JSWST is classified as Obsolete, while the LBM2016T101J is classified as Not For New Designs. For applications requiring continued supply of this inductor specification, the LBM2016T101J represents the available alternative from Taiyo Yuden with full electrical and mechanical equivalence.

Packaging differs between the two parts: the L0806B101JSWST is supplied in Cut Tape (CT) format, while the LBM2016T101J is supplied in Tape & Reel (TR) format. This distinction affects procurement and assembly logistics but does not impact component performance or compatibility.

Frequently Asked Questions (FAQ)

Q: Can the LBM2016T101J be used as a direct replacement for the L0806B101JSWST in existing designs?

A: Yes. The LBM2016T101J meets all critical electrical parameters (100 µH inductance, 80 mA current rating, 8 Ohm DCR), mechanical specifications (0806 / 2016 Metric package, surface mount), and environmental ratings (-40°C ~ 105°C operating temperature, ROHS3 compliance, MSL Level 1). Direct substitution is supported without circuit modification.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape (CT) packaging supplies components in individual strips cut from the reel, suitable for small-quantity orders and manual assembly. Tape & Reel (TR) packaging supplies components on continuous reels, optimized for high-volume automated assembly. Both formats contain identical components; the difference is in supply and handling format only.

Q: Are there any performance differences between the L0806B101JSWST and LBM2016T101J?

A: Both components are electrically equivalent across all specified parameters. The LBM2016T101J provides a measured Q value of 15 @ 796 kHz, which is not specified for the L0806B101JSWST. This additional data does not indicate performance difference but rather represents additional characterization data provided by Taiyo Yuden.

Q: Why is the L0806B101JSWST marked as Obsolete?

A: Obsolete status indicates that KEMET has discontinued manufacturing this part. The LBM2016T101J from Taiyo Yuden provides equivalent functionality and specifications for applications requiring this inductor type.

Q: Can the LBM2016T101J be used in new designs?

A: The LBM2016T101J carries a "Not For New Designs" status, indicating that Taiyo Yuden recommends this part for replacement and legacy support applications rather than new product development. However, it remains functionally equivalent to the L0806B101JSWST for all electrical and mechanical parameters.

Q: What compliance certifications apply to both parts?

A: Both the L0806B101JSWST and LBM2016T101J are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 and HTSUS 8504.50.8000. Both maintain MSL Level 1 (Unlimited) moisture sensitivity rating.