L0806B100JSWST Equivalent & Substitute Parts

Part Overview

The L0806B100JSWST is a 10 µH unshielded drum core wirewound inductor manufactured by KEMET, rated for 215 mA continuous current with 1.2 Ohm DC resistance in a 0806 (2016 Metric) surface mount package. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing production and maintenance applications. Substitute parts must maintain identical electrical performance and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

L0806B100JSWST

KEMETIn Stock: 2617L0806B100JSWST Datasheet

Current PartRFQ

LBM2016T100J

Taiyo YudenIn Stock: 2913LBM2016T100J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the L0806B100JSWST is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Inductance: 10 µH at ±5% tolerance
• Current Rating: 215 mA minimum
• DC Resistance: 1.2 Ohm
• Self Resonant Frequency: 27 MHz
• Test Frequency: 2.52 MHz

Mechanical Parameters (Must Match):

• Package / Case: 0806 (2016 Metric)
• Core Type: Drum Core, Wirewound
• Core Material: Ferrite
• Shielding: Unshielded
• Physical Dimensions: 0.079" L x 0.063" W (2.00mm x 1.60mm)
• Height - Seated (Max): 0.071" (1.80mm)

Environmental & Compliance Parameters (Must Match):

• Operating Temperature Range: -40°C to 105°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts identified in this reference maintain full equivalence across all specified parameters. Packaging format differences (Cut Tape versus Tape & Reel) do not affect electrical or mechanical compatibility and represent logistics variations only.

Parameter Comparison

Engineering Selection Recommendations

LBM2016T100J (Taiyo Yuden) - Primary Substitute

The LBM2016T100J from Taiyo Yuden is a direct electrical and mechanical equivalent to the L0806B100JSWST. All critical parameters including inductance, current rating, DC resistance, package dimensions, and operating temperature range are identical. Both components maintain ROHS3 compliance and MSL Level 1 rating.

Product Status Consideration:

The L0806B100JSWST is classified as obsolete, while the LBM2016T100J is classified as "Not For New Designs." Both product statuses indicate restricted availability or lifecycle status. For applications requiring active component sourcing, alternative parts from current production lines should be evaluated through the manufacturer's current product portfolio.

Packaging Format:

The L0806B100JSWST is supplied in Cut Tape (CT) format with 2550 pieces in stock. The LBM2016T100J is supplied in Tape & Reel (TR) format with 2837 pieces in stock. Packaging format does not affect electrical performance or mechanical compatibility; selection between formats depends on assembly process requirements and minimum order quantities.

Compliance Status:

Both parts maintain ROHS3 compliance and are REACH unaffected, suitable for applications with environmental regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the LBM2016T100J directly replace the L0806B100JSWST in existing designs?

A: Yes. The LBM2016T100J maintains full electrical and mechanical equivalence across all specified parameters. Inductance, current rating, DC resistance, package dimensions, and operating temperature range are identical. Direct substitution is supported without circuit redesign.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape and Tape & Reel are logistics and assembly format variations only. Both formats contain identical components with identical electrical and mechanical specifications. CT format is typically used for smaller quantities or manual assembly; TR format is used for automated assembly processes. The choice between formats depends on production volume and assembly equipment, not component performance.

Q: Are there any performance differences between the KEMET L0806B100JSWST and Taiyo Yuden LBM2016T100J?

A: No performance differences exist within the specified parameters. Both components are rated for 10 µH inductance at ±5% tolerance, 215 mA current, 1.2 Ohm DC resistance, and 27 MHz self-resonant frequency. The Taiyo Yuden part provides Q @ 2.52 MHz specification (25), which is additional data not provided for the KEMET part but does not indicate performance variation.

Q: Why are both parts classified with restricted product status?

A: The L0806B100JSWST is obsolete, indicating end-of-life status. The LBM2016T100J is classified as "Not For New Designs," indicating the manufacturer is transitioning away from this product line. Both statuses reflect component lifecycle management by manufacturers. For new production designs, current-generation inductors from active product lines should be evaluated.

Q: Are both parts RoHS compliant?

A: Yes. Both the L0806B100JSWST and LBM2016T100J are ROHS3 compliant and REACH unaffected, meeting environmental regulatory requirements for EU and global markets.

Q: What does MSL Level 1 mean for moisture sensitivity?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture control requirements. Both components can be stored and handled without desiccant packaging or moisture-controlled environments, simplifying logistics and inventory management.