L0109ME TRIAC Sensitive Gate 600V 1A TO-92 Equivalent & Substitute Parts

Part Overview

The L0109ME is an active-status thyristor component manufactured by Littelfuse Inc., classified as a Logic - Sensitive Gate TRIAC rated for 600V off-state voltage and 1A on-state current in a Through Hole TO-92 package. This component is used in applications requiring controlled AC switching with sensitive gate triggering characteristics. Equivalent and substitute parts are identified based on matching electrical parameters, package compatibility, and operational specifications to ensure functional interchangeability in circuit designs.

Key Parameters

Parameter	L0109ME Value
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	1 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	10 mA
Current - Hold (Ih) (Max)	10 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)	10A, 12A
Operating Temperature Range	-40°C ~ 125°C (TJ)
Package / Case	TO-226-3, TO-92-3 (TO-226AA)
Mounting Type	Through Hole
Triac Type	Logic - Sensitive Gate
Configuration	Single
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the L0109ME is determined by the following critical parameters that must match or remain within acceptable operational limits:

Voltage - Off State: Must be 600V to maintain voltage rating compatibility
Current - On State (It (RMS)) (Max): Must be 1A or higher to support the same load current
Voltage - Gate Trigger (Vgt) (Max): Must be 1.3V or lower for sensitive gate operation
Current - Gate Trigger (Igt) (Max): Must be 10mA or lower for gate drive compatibility
Current - Hold (Ih) (Max): Must be 10mA or lower for holding current requirements
Package / Case: Must be TO-92-3 or TO-226-3 for mechanical and electrical pin compatibility
Mounting Type: Must be Through Hole for PCB assembly compatibility
Triac Type: Must be Logic - Sensitive Gate for functional equivalence
Operating Temperature Range: Must support -40°C ~ 125°C or equivalent range
RoHS Status: Must be ROHS3 Compliant for regulatory compliance

Substitute parts are grouped into two categories: MFR Recommended substitutes (manufacturer-endorsed alternatives) and Parametric Equivalents (parts meeting all electrical and mechanical specifications).

Parameter Comparison

Part Number	Manufacturer	Voltage - Off State	Current - On State (Max)	Vgt (Max)	Igt (Max)	Ih (Max)	Itsm (50/60Hz)	Operating Temp	Package	RoHS Status
L0109ME	Littelfuse Inc.	600 V	1 A	1.3 V	10 mA	10 mA	10A, 12A	-40°C ~ 125°C	TO-92	ROHS3 Compliant
Z00607MA 5BL2	STMicroelectronics	600 V	800 mA	1.3 V	5 mA	5 mA	9A, 9.5A	-40°C ~ 110°C	TO-92-3	ROHS3 Compliant
Z0103MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	8A, 8.5A	-40°C ~ 125°C	TO-92-3	ROHS3 Compliant
Z0103MA 2AL2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	8A, 8.5A	-40°C ~ 125°C	TO-92-3	ROHS3 Compliant
Z0103MA 5AL2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	8A, 8.5A	-40°C ~ 125°C	TO-92-3	ROHS3 Compliant
Z0107MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	5 mA	10 mA	8A, 8.5A	-40°C ~ 125°C	TO-92-3	ROHS3 Compliant
Z0109MA 2AL2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	8A, 8.5A	-40°C ~ 125°C	TO-92	ROHS3 Compliant
Z0109MA 5AL2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	8A, 8.5A	-40°C ~ 125°C	TO-92	ROHS3 Compliant
Z0109MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	8A, 8.5A	-40°C ~ 125°C	TO-92-3	ROHS3 Compliant

Engineering Selection Recommendations

All substitute parts listed are active-status components with ROHS3 compliance and REACH Unaffected status, matching the regulatory profile of the L0109ME.

Direct Parametric Equivalents (identical electrical specifications and package compatibility):

Z0109MA 1AA2, Z0109MA 2AL2, Z0109MA 5AL2: These STMicroelectronics parts match all critical parameters including 600V off-state voltage, 1A on-state current, 1.3V gate trigger voltage, 10mA gate trigger current, and 10mA hold current. Operating temperature range is -40°C ~ 125°C. Package variants include TO-92 and TO-92-3 configurations.

Functional Equivalents with Minor Parameter Variations:

Z0103MA 1AA2, Z0103MA 2AL2, Z0103MA 5AL2: These parts maintain 600V, 1A, and 1.3V specifications but feature lower gate trigger current (3mA) and hold current (7mA), with reduced non-repetitive surge current (8A, 8.5A vs. 10A, 12A). Operating temperature range is -40°C ~ 125°C.
Z0107MA 1AA2: Matches 600V, 1A, and 1.3V specifications with 5mA gate trigger current and 10mA hold current. Operating temperature range is -40°C ~ 125°C.

Current-Reduced Substitute:

Z00607MA 5BL2: Rated for 800mA on-state current (vs. 1A), with 5mA gate trigger current and 5mA hold current. Operating temperature range is -40°C ~ 110°C (5°C lower maximum). Non-repetitive surge current is 9A, 9.5A. This part is suitable only for applications where the load current does not exceed 800mA.

Frequently Asked Questions (FAQ)

Q: Can Z00607MA 5BL2 be used as a direct replacement for L0109ME?

A: Z00607MA 5BL2 is a functional substitute only for applications where the maximum on-state current requirement does not exceed 800mA. The L0109ME is rated for 1A on-state current. Additionally, the maximum operating temperature is 110°C versus 125°C for the L0109ME. Verify application current requirements before selection.

Q: What is the difference between Z0109MA variants (2AL2, 5AL2, 1AA2)?

A: All three Z0109MA variants share identical electrical specifications (600V, 1A, 1.3V Vgt, 10mA Igt, 10mA Ih, -40°C ~ 125°C). The suffix designations (2AL2, 5AL2, 1AA2) indicate different packaging formats: Cut Tape (CT) or Bulk, and different tape reel configurations. Electrical performance is equivalent; selection depends on procurement and assembly requirements.

Q: Are Z0103MA parts interchangeable with L0109ME?

A: Z0103MA parts (1AA2, 2AL2, 5AL2) are electrically compatible with L0109ME for the primary operating parameters (600V, 1A, 1.3V Vgt, -40°C ~ 125°C). However, gate trigger current is lower (3mA vs. 10mA) and hold current is lower (7mA vs. 10mA). These differences may affect gate drive circuit design. Verify gate drive circuit compatibility before substitution.

Q: What package compatibility exists between TO-92 and TO-92-3?

A: Both TO-92 and TO-92-3 are Through Hole packages with three leads in the same physical footprint (TO-226-3, TO-226AA). They are mechanically and electrically compatible for PCB assembly. The designation difference reflects manufacturing or supplier variations, not functional differences.

Q: Do all substitute parts meet the same compliance standards as L0109ME?

A: All listed substitute parts are ROHS3 Compliant and REACH Unaffected, matching the regulatory status of L0109ME. All parts are classified as active-status components suitable for current production applications.

Q: What is the significance of the non-repetitive surge current (Itsm) differences?

A: Non-repetitive surge current ratings (10A, 12A for L0109ME vs. 8A, 8.5A for most STMicroelectronics substitutes) indicate the maximum transient current the device can withstand. Lower Itsm ratings in substitute parts may limit performance in applications with high inrush current or transient conditions. Evaluate circuit transient characteristics before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message