KXOB22-01X8F Equivalent & Substitute Parts

Part Overview

The KXOB22-01X8F is a monocrystalline solar cell manufactured by ANYSOLAR Ltd as part of the IXOLAR™ series. This component operates at 4.7 V open circuit voltage with a maximum power point current of 3.8 mA and voltage of 3.4 V. The part is currently obsolete, with 631 units available in new original stock. Due to its obsolete status, equivalent substitute parts from the same manufacturer are necessary for ongoing design requirements and production continuity.

Substiute Parts

KXOB22-01X8F

ANYSOLAR LtdIn Stock: 673KXOB22-01X8F Datasheet

Current PartRFQ

KXOB25-01X8F-TB

ANYSOLAR LtdIn Stock: 2515KXOB25-01X8F-TB Datasheet

DirectRFQ

KXOB25-02X8F-TB

ANYSOLAR LtdIn Stock: 1535KXOB25-02X8F-TB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the KXOB22-01X8F is determined by the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Monocrystalline solar cell type from ANYSOLAR Ltd IXOLAR™ series
• Compatible package form factor (Cell configuration)
• Similar physical dimensions (length and width within acceptable tolerance)
• Voltage output range suitable for 4.7 V circuit applications
• Current output capability compatible with 3.8 mA Pmpp requirement

Substitute Parts Identified:

• KXOB25-01X8F-TB: 5.53 V open circuit, 5.5 mA @ Pmpp, 22.0mm x 7.0mm footprint
• KXOB25-02X8F-TB: 5.53 V open circuit, 5.9 mA @ Pmpp, 23.00mm x 8.00mm footprint

Both substitute parts maintain the same cell thickness (1.8mm) and monocrystalline technology. The KXOB25 series represents active production alternatives with higher power output and improved operating temperature range (-40°C ~ 90°C).

Parameter Comparison

Engineering Selection Recommendations

KXOB25-01X8F-TB is the primary substitute for applications requiring minimal footprint change. This part maintains the original 22.0mm x 7.0mm dimensions and provides higher current output (5.5 mA @ Pmpp) with active product status and ROHS3 compliance. The increased open circuit voltage (5.53 V vs. 4.7 V) and power output (24.5 mW) represent performance improvements over the obsolete KXOB22-01X8F.

KXOB25-02X8F-TB is suitable for applications where slightly larger dimensions (23.00mm x 8.00mm) are acceptable. This variant offers the highest power output (26.3 mW) and current capability (5.9 mA @ Pmpp) within the substitute group, with identical compliance certifications and operating temperature range.

Both substitutes are active production parts with ROHS3 compliance and REACH Unaffected status, ensuring regulatory compliance and supply chain continuity. The identical MSL rating (3, 168 Hours) and cell thickness (1.8mm) maintain compatibility with existing handling and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can KXOB25-01X8F-TB and KXOB25-02X8F-TB be used interchangeably with KXOB22-01X8F?

A: Both KXOB25 variants are electrical substitutes for the obsolete KXOB22-01X8F. KXOB25-01X8F-TB maintains identical footprint dimensions (22.0mm x 7.0mm), while KXOB25-02X8F-TB requires a slightly larger PCB layout area (23.00mm x 8.00mm). Circuit design must accommodate the higher voltage output (5.53 V vs. 4.7 V) and current ratings of the substitute parts.

Q: What are the key electrical differences between the main part and substitutes?

A: The KXOB22-01X8F operates at 4.7 V open circuit with 3.8 mA @ Pmpp. The KXOB25-01X8F-TB and KXOB25-02X8F-TB both operate at 5.53 V open circuit with 5.5 mA and 5.9 mA @ Pmpp respectively. These higher electrical parameters result in increased power output (24.5 mW and 26.3 mW) compared to the original part.

Q: Are there packaging differences between the substitute parts?

A: KXOB25-01X8F-TB is supplied in Bulk packaging, while KXOB25-02X8F-TB is supplied in Tube packaging. Both maintain the same cell thickness (1.8mm) and MSL rating (3, 168 Hours). Packaging selection depends on production volume and handling requirements.

Q: Do the substitute parts meet the same compliance standards?

A: Both KXOB25 variants are ROHS3 compliant and REACH Unaffected, with identical ECCN (EAR99) classification. The MSL rating remains unchanged at 3 (168 Hours), ensuring compatibility with existing assembly and storage protocols.

Q: What is the operating temperature range for substitute parts?

A: Both KXOB25-01X8F-TB and KXOB25-02X8F-TB operate across -40°C to 90°C. The original KXOB22-01X8F operating temperature range was not specified in available documentation.