Equivalent & Substitute Parts for KXG200VB33RM10X20LL

Part Overview

The KXG200VB33RM10X20LL is a 33 µF, 200 V aluminum electrolytic capacitor in radial, can package manufactured by Chemi-Con. This component is classified as obsolete, with 862 units currently in stock. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 8000 hours at 105°C, suitable for general-purpose applications requiring polar capacitive filtering and energy storage.

Due to the obsolete product status of the KXG200VB33RM10X20LL, identifying equivalent and substitute parts is essential for design continuity, procurement planning, and long-term supply chain management. Active alternatives with identical or superior electrical and mechanical specifications are available from both the original manufacturer and qualified cross-manufacturers.

Substiute Parts

KXG200VB33RM10X20LL

Chemi-ConIn Stock: 890KXG200VB33RM10X20LL Datasheet

Current PartRFQ

EKXG201ELL330MJ20S

Chemi-ConIn Stock: 2095EKXG201ELL330MJ20S Datasheet

Parametric EquivalentRFQ

200BXW33MEFR10X16

RubyconIn Stock: 1021200BXW33MEFR10X16 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KXG200VB33RM10X20LL are identified based on strict electrical and mechanical parameter matching. The substitution criteria are:

Primary Matching Parameters:

• Capacitance: 33 µF (exact match required)
• Voltage Rating: 200 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Type: Radial, Can (exact match required)
• Lead Spacing: 0.197" (5.00 mm) (exact match required)
• Diameter: 0.394" (10.00 mm) (exact match required)
• Operating Temperature Range: -40°C to 105°C (exact match required)
• Ripple Current Ratings: 260 mA @ 120 Hz and 650 mA @ 100 kHz (exact match required)

Secondary Consideration:

• Lifetime @ 105°C: Minimum 8000 hours (equal or greater acceptable)

All identified substitutes meet or exceed these parameters without deviation.

Parameter Comparison

Engineering Selection Recommendations

EKXG201ELL330MJ20S (Chemi-Con KXG Series)

This part is a parametric equivalent from the same manufacturer and series as the main part. It maintains identical electrical specifications and mechanical dimensions while offering active product status. The EKXG201ELL330MJ20S is ROHS3 compliant, addressing regulatory requirements that the obsolete KXG200VB33RM10X20LL does not meet. With 2020 units in stock, this substitute provides immediate availability and design continuity within the Chemi-Con KXG platform.

200BXW33MEFR10X16 (Rubycon BXW Series)

This part is a direct manufacturer equivalent from Rubycon, offering superior lifetime performance at 10000 hours versus 8000 hours at 105°C. All electrical parameters match exactly. The physical height is reduced to 0.709" (18.00 mm) compared to 0.787" (20.00 mm), providing a more compact footprint while maintaining identical lead spacing and diameter. This part is ROHS3 compliant and active in production, with 920 units available. The reduced height may provide layout advantages in space-constrained applications.

Both substitutes are suitable for direct replacement based on electrical and mechanical compatibility. Selection between them depends on supply chain preference, compliance requirements, and physical space constraints in the target application.

Frequently Asked Questions (FAQ)

Q: Can EKXG201ELL330MJ20S be used as a direct replacement for KXG200VB33RM10X20LL?

A: Yes. The EKXG201ELL330MJ20S is electrically and mechanically identical to the KXG200VB33RM10X20LL. Both parts share the same capacitance (33 µF), voltage rating (200 V), tolerance (±20%), operating temperature range (-40°C to 105°C), ripple current specifications, lead spacing (5.00 mm), diameter (10.00 mm), and height (20.00 mm). The primary difference is product status: EKXG201ELL330MJ20S is active and ROHS3 compliant, while KXG200VB33RM10X20LL is obsolete and non-compliant.

Q: What is the difference between the two substitute parts?

A: Both EKXG201ELL330MJ20S and 200BXW33MEFR10X16 meet all electrical requirements. The key differences are: (1) Manufacturer: Chemi-Con versus Rubycon; (2) Lifetime: 8000 hours versus 10000 hours at 105°C; (3) Height: 20.00 mm versus 18.00 mm. The Rubycon part offers extended lifetime and reduced height, while the Chemi-Con part maintains the original series designation.

Q: Are there any physical compatibility concerns with the 200BXW33MEFR10X16?

A: The 200BXW33MEFR10X16 has a reduced height of 0.709" (18.00 mm) compared to the original 0.787" (20.00 mm). Lead spacing and diameter remain identical at 5.00 mm and 10.00 mm respectively. This reduced height is compatible with through-hole PCB layouts and may provide advantages in space-constrained designs. No other mechanical incompatibilities exist.

Q: Are both substitutes RoHS compliant?

A: Yes. Both EKXG201ELL330MJ20S and 200BXW33MEFR10X16 are ROHS3 compliant. The original KXG200VB33RM10X20LL is RoHS non-compliant. If RoHS compliance is required for the application or end market, either substitute is acceptable.

Q: What are the ripple current specifications for these parts?

A: All three parts—the main part and both substitutes—have identical ripple current ratings: 260 mA at 120 Hz (low frequency) and 650 mA at 100 kHz (high frequency). These specifications determine the maximum AC current the capacitor can handle without exceeding temperature limits.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, for through-hole PCB designs. All three parts share identical lead spacing (5.00 mm) and diameter (10.00 mm), ensuring compatibility with existing PCB footprints. The height difference in the Rubycon part (18.00 mm versus 20.00 mm) does not affect electrical performance or standard through-hole mounting procedures.

Q: What is the REACH and ECCN status for these parts?

A: All three parts share identical REACH and ECCN classifications: REACH Unaffected and ECCN EAR99. These regulatory designations do not differ between the main part and substitutes.