KTR25JZPJ430 Equivalent & Substitute Parts

Part Overview

The KTR25JZPJ430 is a 43 Ohm ±5% 1/3W thick film chip resistor in 1210 (3225 Metric) package manufactured by Rohm Semiconductor. This automotive-grade component meets AEC-Q200 qualification and operates across -55°C to 155°C. The part is currently active in production with 799 units in stock.

Substitute parts are necessary when the original component becomes unavailable, when design requirements shift toward higher tolerance or power ratings, or when alternative manufacturers offer equivalent electrical and mechanical performance within the same package footprint.

Key Parameters

Parameter	Value
Resistance	43 Ohms
Tolerance	±5%
Power Rating	0.333W (1/3W)
Package	1210 (3225 Metric)
Composition	Thick Film
Automotive Rating	AEC-Q200
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the KTR25JZPJ430 is determined by the following criteria:

Mandatory Parameters (Must Match):

Resistance value: 43 Ohms
Package: 1210 (3225 Metric)
Composition: Thick Film
Automotive qualification: AEC-Q200
Operating temperature range: -55°C to 155°C minimum
RoHS compliance: ROHS3 Compliant

Allowable Variations:

Tolerance: ±5% or tighter (±1% acceptable as upgrade)
Power rating: Equal or greater than 0.333W (0.5W acceptable as upgrade)
Temperature coefficient: ±200ppm/°C or better
Manufacturer: Different manufacturers acceptable if all mandatory parameters met
Product status: Active or Not For New Designs acceptable

The four substitute parts listed below meet all mandatory parameters while offering either equivalent or improved electrical characteristics.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Temp Coeff	Product Status	Inventory
KTR25JZPJ430	Rohm Semiconductor	43 Ohms	±5%	0.333W	±200ppm/°C	Active	799 Pcs
KTR25JZPF43R0	Rohm Semiconductor	43 Ohms	±1%	0.333W	±100ppm/°C	Active	4778 Pcs
RMCF1210JT43R0	Stackpole Electronics Inc	43 Ohms	±5%	0.5W	±200ppm/°C	Active	19059 Pcs
ERJ-14YJ430U	Panasonic Electronic Components	43 Ohms	±5%	0.5W	±200ppm/°C	Not For New Designs	1134 Pcs
ERJ-P14J430U	Panasonic Electronic Components	43 Ohms	±5%	0.5W	±200ppm/°C	Active	6083 Pcs

Engineering Selection Recommendations

KTR25JZPF43R0 (Rohm Semiconductor): This upgrade substitute offers tighter tolerance (±1% versus ±5%) and improved temperature coefficient (±100ppm/°C versus ±200ppm/°C) while maintaining identical power rating and package. Same manufacturer as the original part. Recommended for applications requiring enhanced precision. High inventory availability (4778 units).

RMCF1210JT43R0 (Stackpole Electronics Inc): Direct substitute with identical tolerance and temperature coefficient to the original. Provides increased power dissipation capability (0.5W versus 0.333W) in the same package footprint. Highest inventory availability (19059 units). Suitable for direct replacement in existing designs.

ERJ-P14J430U (Panasonic Electronic Components): Active product with pulse withstanding capability. Matches tolerance and temperature coefficient of the original while offering increased power rating (0.5W). Recommended for applications subject to transient pulse conditions. Good inventory availability (6083 units).

ERJ-14YJ430U (Panasonic Electronic Components): Functionally equivalent to ERJ-P14J430U but marked as Not For New Designs. Acceptable for legacy system maintenance or existing design continuation only. Lower inventory (1134 units).

Frequently Asked Questions (FAQ)

Q: Can KTR25JZPF43R0 be used as a direct replacement for KTR25JZPJ430?

A: Yes. Both parts are manufactured by Rohm Semiconductor, share identical 1210 package dimensions, and maintain the same 43 Ohm resistance and operating temperature range. The KTR25JZPF43R0 offers superior tolerance (±1%) and temperature coefficient (±100ppm/°C), making it a compatible upgrade.

Q: What is the difference between the 0.333W and 0.5W power ratings?

A: Power rating indicates maximum continuous power dissipation. The 0.5W substitutes (RMCF1210JT43R0, ERJ-14YJ430U, ERJ-P14J430U) can safely dissipate higher power levels than the original 0.333W part. In applications where the original part operates below 0.333W, either rating is acceptable. Higher power rating provides additional thermal margin.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitutes meet AEC-Q200 automotive qualification and ROHS3 compliance, matching the original part's certifications.

Q: Can ERJ-14YJ430U be used in new designs?

A: No. This part is marked as Not For New Designs. It is suitable only for maintaining existing systems or continuing legacy designs. For new applications, select from KTR25JZPF43R0, RMCF1210JT43R0, or ERJ-P14J430U.

Q: What does "pulse withstanding" mean on the ERJ-P14J430U?

A: Pulse withstanding capability indicates the component can tolerate brief high-energy transient events without degradation. This feature is beneficial in circuits subject to voltage spikes or current surges but is not required for standard DC applications.

Q: Are the physical dimensions identical across all substitutes?

A: All parts use the 1210 (3225 Metric) package with identical length (0.126" / 3.20mm) and width (0.098" / 2.50mm). Height varies slightly: KTR25JZPJ430 and KTR25JZPF43R0 are 0.026" (0.65mm), while RMCF1210JT43R0, ERJ-14YJ430U, and ERJ-P14J430U are 0.028" (0.70mm). This 0.002" difference is within standard PCB assembly tolerances.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message