KTR10EZPJ682 Equivalent & Substitute Parts

Part Overview

The KTR10EZPJ682 is a 6.8 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and meets Automotive AEC-Q200 specifications with high voltage capability. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching resistance value, package format, power rating, and electrical performance characteristics within acceptable tolerance and temperature coefficient ranges.

Substiute Parts

KTR10EZPJ682

Rohm SemiconductorIn Stock: 1206KTR10EZPJ682 Datasheet

Current PartRFQ

KTR10EZPF6801

Rohm SemiconductorIn Stock: 10430KTR10EZPF6801 Datasheet

UpgradeRFQ

CRCW08056K80JNEA

Vishay DaleIn Stock: 11796CRCW08056K80JNEA Datasheet

UpgradeRFQ

CRG0805F6K8

TE Connectivity Passive ProductIn Stock: 144266CRG0805F6K8 Datasheet

UpgradeRFQ

ERJ-6ENF6801V

Panasonic Electronic ComponentsIn Stock: 308369ERJ-6ENF6801V Datasheet

UpgradeRFQ

RC0805FR-076K8L

YAGEOIn Stock: 1254215RC0805FR-076K8L Datasheet

UpgradeRFQ

RC0805JR-076K8L

YAGEOIn Stock: 219048RC0805JR-076K8L Datasheet

UpgradeRFQ

RMCF0805FT6K80

Stackpole Electronics IncIn Stock: 28903RMCF0805FT6K80 Datasheet

UpgradeRFQ

RMCF0805JT6K80

Stackpole Electronics IncIn Stock: 243408RMCF0805JT6K80 Datasheet

UpgradeRFQ

CR0805-JW-682ELF

Bourns Inc.In Stock: 48348CR0805-JW-682ELF Datasheet

SimilarRFQ

CRCW08056K80JNEAC

Vishay DaleIn Stock: 70614CRCW08056K80JNEAC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KTR10EZPJ682 are grouped based on the following substitution criteria:

Upgrade Substitutes — Parts with improved tolerance (±1% vs ±5%) or enhanced specifications while maintaining identical resistance value, package format, power rating, and operating temperature range. These parts provide tighter tolerance performance and lower temperature coefficient (±100ppm/°C vs ±200ppm/°C) where circuit design permits component upgrade.

Similar Substitutes — Parts with identical electrical specifications (6.8 kOhms ±5%, 0.125W, 0805 package) but different packaging format (Cut Tape & Digi-Reel vs Tape & Reel) or minor physical dimension variations. These maintain full functional equivalence for direct circuit replacement.

Critical Matching Parameters:

• Resistance: 6.8 kOhms (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Power Rating: 0.125W minimum (exact match required)
• Operating Temperature: -55°C to 155°C minimum (exact match required)
• Composition: Thick Film (exact match required)

Parameter Comparison

Engineering Selection Recommendations

For Automotive AEC-Q200 Applications: Select KTR10EZPF6801 (Rohm), ERJ-6ENF6801V (Panasonic), RMCF0805FT6K80 (Stackpole), or RMCF0805JT6K80 (Stackpole). All four parts carry AEC-Q200 certification matching the original KTR10EZPJ682 specification.

For Tolerance-Critical Circuits: KTR10EZPF6801, CRG0805F6K8, ERJ-6ENF6801V, RMCF0805FT6K80, and RC0805FR-076K8L provide ±1% tolerance with ±100ppm/°C temperature coefficient, improving circuit accuracy over the ±5% tolerance of the original part.

For General-Purpose Replacement: CRCW08056K80JNEA (Vishay Dale), RC0805JR-076K8L (YAGEO), and CR0805-JW-682ELF (Bourns) maintain ±5% tolerance and ±200ppm/°C temperature coefficient matching the original specification. CRCW08056K80JNEA offers reduced maximum height (0.50mm vs 0.65mm).

For Non-Automotive Applications: CRG0805F6K8 (TE Connectivity) and RC0805FR-076K8L (YAGEO) are suitable where AEC-Q200 certification is not required. Both provide ±1% tolerance performance.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and -55°C to 155°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use a ±1% tolerance part as a direct replacement for the ±5% KTR10EZPJ682?

A: Yes. A ±1% tolerance part is a direct functional upgrade. The tighter tolerance provides improved circuit accuracy without any compatibility issues. The part will operate identically in the circuit while offering superior performance.

Q: What is the significance of the temperature coefficient difference between ±100ppm/°C and ±200ppm/°C?

A: Temperature coefficient defines resistance change per degree Celsius. The ±100ppm/°C parts (upgrade substitutes) exhibit half the resistance drift over temperature compared to ±200ppm/°C parts. For precision circuits operating across wide temperature ranges, lower temperature coefficient improves stability.

Q: Are Cut Tape & Digi-Reel packaged parts compatible with Tape & Reel equipment?

A: Cut Tape & Digi-Reel packaging is suitable for manual assembly or different automated pick-and-place systems. Verify your assembly equipment compatibility before selecting parts with different packaging formats. Tape & Reel format is standard for high-volume automated assembly.

Q: Does the height difference (0.50mm to 0.70mm) affect PCB assembly?

A: All substitute parts remain within standard 0805 package height specifications. Height variations of 0.20mm are within PCB design tolerances and do not affect assembly or functionality. Verify specific PCB clearance requirements for your application.

Q: Which substitute part offers the best inventory availability?

A: RC0805FR-076K8L (YAGEO) has the highest inventory level at 1,254,135 pieces. ERJ-6ENF6801V (Panasonic) offers 308,281 pieces. Both provide excellent supply chain availability.

Q: Can I use CRCW08056K80JNEAC instead of CRCW08056K80JNEA?

A: Both parts are electrically identical 6.8 kOhms ±5% 0805 resistors. The difference is packaging format: CRCW08056K80JNEA uses Tape & Reel while CRCW08056K80JNEAC uses Cut Tape & Digi-Reel. Select based on your assembly process requirements.