KTR10EZPJ620 Equivalent & Substitute Parts

Part Overview

The KTR10EZPJ620 is a 62 Ohm ±5% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with high voltage capability and operates across -55°C to 155°C. The part is currently active in production with 1014 units in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand upgraded tolerance specifications, or when alternative sourcing is required for supply chain optimization.

Key Parameters

Parameter	Value
Resistance	62 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the KTR10EZPJ620 is determined by the following criteria:

Direct Equivalents maintain all electrical and mechanical parameters: 62 Ohm resistance, ±5% tolerance, 0.125W power rating, 0805 package, thick film composition, ±200ppm/°C temperature coefficient, -55°C to 155°C operating range, and AEC-Q200 automotive qualification. These parts differ only in manufacturer, series designation, or packaging format (Tape & Reel versus Cut Tape).

Upgrade Options provide improved tolerance (±1% instead of ±5%) while maintaining all other specifications including resistance value, power rating, package, and operating temperature range. These parts feature reduced temperature coefficient (±100ppm/°C) and are suitable for applications requiring tighter resistance accuracy.

Similar Parts maintain the same resistance, tolerance, and package but increase power rating to 0.4W (2/5W). These are applicable when thermal margin or pulse withstanding capability is required without changing the electrical circuit behavior.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	AEC-Q200	Packaging	Status
KTR10EZPJ620	Rohm Semiconductor	62 Ω	±5%	0.125	±200	Yes	Tape & Reel	Active
MCR10ERTJ620	Rohm Semiconductor	62 Ω	±5%	0.125	±200	No	Cut Tape & Digi-Reel	Discontinued
KTR10EZPF62R0	Rohm Semiconductor	62 Ω	±1%	0.125	±100	Yes	Tape & Reel	Active
ESR10EZPJ620	Rohm Semiconductor	62 Ω	±5%	0.4	±200	Yes	Tape & Reel	Active
CRCW080562R0JNEA	Vishay Dale	62 Ω	±5%	0.125	±200	Yes	Tape & Reel	Active
ERJ-6GEYJ620V	Panasonic Electronic Components	62 Ω	±5%	0.125	±200	Yes	Tape & Reel	Active
RMCF0805JT62R0	Stackpole Electronics Inc	62 Ω	±5%	0.125	±200	Yes	Tape & Reel	Active
ERJ-6ENF62R0V	Panasonic Electronic Components	62 Ω	±1%	0.125	±100	Yes	Tape & Reel	Active
RC0805FR-0762RL	YAGEO	62 Ω	±1%	0.125	±100	No	Cut Tape & Digi-Reel	Active
RC0805JR-0762RL	YAGEO	62 Ω	±5%	0.125	±100	No	Tape & Reel	Active
RMCF0805FT62R0	Stackpole Electronics Inc	62 Ω	±1%	0.125	±100	Yes	Tape & Reel	Active

Engineering Selection Recommendations

For Direct Replacement (Active Production): CRCW080562R0JNEA (Vishay Dale), ERJ-6GEYJ620V (Panasonic), and RMCF0805JT62R0 (Stackpole) are functionally equivalent to KTR10EZPJ620 with identical electrical specifications and AEC-Q200 automotive qualification. All three maintain ±5% tolerance, 0.125W power rating, and ±200ppm/°C temperature coefficient. CRCW080562R0JNEA offers the highest inventory availability (20,712 units) and is suitable for high-volume production requirements.

For Tolerance Upgrade: KTR10EZPF62R0 (Rohm), RMCF0805FT62R0 (Stackpole), and ERJ-6ENF62R0V (Panasonic) provide ±1% tolerance with reduced temperature coefficient (±100ppm/°C) while maintaining AEC-Q200 qualification and 0.125W power rating. RMCF0805FT62R0 has the largest inventory (236,547 units) and is recommended when tighter resistance accuracy is required. RC0805FR-0762RL (YAGEO) offers ±1% tolerance and moisture-resistant composition but lacks AEC-Q200 automotive rating.

For Higher Power Margin: ESR10EZPJ620 (Rohm) increases power rating to 0.4W while maintaining ±5% tolerance and AEC-Q200 qualification. This part is suitable for applications requiring additional thermal margin or pulse withstanding capability without circuit redesign.

Avoid: MCR10ERTJ620 is discontinued at DiGi Electronics and should not be selected for new designs despite electrical equivalence.

Frequently Asked Questions (FAQ)

Q: Can I use CRCW080562R0JNEA as a direct replacement for KTR10EZPJ620?

A: Yes. Both parts share identical electrical specifications (62 Ω ±5%, 0.125W), operate across -55°C to 155°C, meet AEC-Q200 automotive standard, and use 0805 package. The only difference is manufacturer (Vishay Dale versus Rohm Semiconductor). Packaging format is Tape & Reel for both.

Q: What is the difference between the ±5% and ±1% tolerance options?

A: Tolerance defines the acceptable resistance deviation from the nominal 62 Ohm value. ±5% allows 58.9 to 65.1 Ohms; ±1% allows 61.38 to 62.62 Ohms. The ±1% upgrade options (KTR10EZPF62R0, RMCF0805FT62R0, ERJ-6ENF62R0V) also feature reduced temperature coefficient (±100ppm/°C versus ±200ppm/°C), providing better stability across temperature extremes.

Q: Is RC0805JR-0762RL suitable for automotive applications?

A: RC0805JR-0762RL lacks AEC-Q200 automotive qualification. While electrically compatible (62 Ω ±5%, 0.125W, 0805 package), it is not recommended for automotive designs requiring AEC-Q200 compliance. Use RMCF0805JT62R0 or ERJ-6GEYJ620V for automotive applications.

Q: Can I use ESR10EZPJ620 (0.4W) instead of KTR10EZPJ620 (0.125W)?

A: Yes, for direct circuit substitution. The higher power rating (0.4W versus 0.125W) provides additional thermal margin and does not affect electrical circuit behavior. Both maintain 62 Ω ±5% resistance, AEC-Q200 qualification, and identical operating temperature range. The 0805 package dimensions are identical.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture control requirements. All listed substitute parts carry MSL 1 rating, eliminating moisture-related handling constraints during storage and assembly.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status, meeting European Union Restriction of Hazardous Substances requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message