KTR10EZPJ156 Equivalent & Substitute Parts

Part Overview

The KTR10EZPJ156 is a 15 MOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is designed for automotive applications with AEC-Q200 qualification and high voltage capability. The part is currently active in production with 951 pieces available in inventory. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility.

Substiute Parts

KTR10EZPJ156

Rohm SemiconductorIn Stock: 1059KTR10EZPJ156 Datasheet

Current PartRFQ

RMCF0805JT15M0

Stackpole Electronics IncIn Stock: 14597RMCF0805JT15M0 Datasheet

UpgradeRFQ

RC0805JR-0715ML

YAGEOIn Stock: 5370RC0805JR-0715ML Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KTR10EZPJ156 are qualified based on the following electrical and mechanical parameters:

• Resistance value: 15 MOhms
• Tolerance: ±5%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The RMCF0805JT15M0 (Stackpole Electronics Inc) qualifies as an upgrade substitute with identical electrical specifications and automotive AEC-Q200 certification. The RC0805JR-0715ML (YAGEO) qualifies as a similar substitute with matching core electrical parameters and moisture-resistant construction, though it does not carry explicit AEC-Q200 automotive rating.

Parameter Comparison

Engineering Selection Recommendations

The RMCF0805JT15M0 from Stackpole Electronics Inc is the primary substitute option. It maintains full electrical equivalence with the KTR10EZPJ156, carries AEC-Q200 automotive qualification, and is ROHS3 compliant. This part is suitable for direct replacement in automotive applications requiring the same performance envelope.

The RC0805JR-0715ML from YAGEO is a secondary substitute option. It meets all core electrical specifications and dimensional requirements with moisture-resistant construction. However, it lacks explicit AEC-Q200 automotive certification. This part is suitable for non-automotive applications or where automotive qualification is not a design requirement.

Both substitute parts are active products with established supply availability and comply with environmental regulations.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805JT15M0 replace KTR10EZPJ156 in automotive applications?

A: Yes. The RMCF0805JT15M0 is electrically and mechanically equivalent with identical AEC-Q200 automotive qualification, making it a direct substitute for automotive circuit designs.

Q: What is the difference between the Stackpole and YAGEO substitutes?

A: The primary difference is automotive certification. The RMCF0805JT15M0 carries AEC-Q200 rating, while the RC0805JR-0715ML does not. Both share identical electrical specifications and package dimensions. The YAGEO part features moisture-resistant construction.

Q: Are there any height differences that affect PCB assembly?

A: The RC0805JR-0715ML has a maximum seated height of 0.024" (0.60mm) compared to 0.026" (0.65mm) for the KTR10EZPJ156 and RMCF0805JT15M0. This 0.002" difference is within typical PCB assembly tolerances and does not affect component placement or reflow soldering.

Q: Do all substitute parts meet RoHS requirements?

A: Yes. The KTR10EZPJ156, RMCF0805JT15M0, and RC0805JR-0715ML are all ROHS3 compliant.

Q: Which substitute should I use for new designs?

A: For automotive applications, use RMCF0805JT15M0. For general-purpose applications without automotive requirements, either RMCF0805JT15M0 or RC0805JR-0715ML is acceptable based on availability and cost considerations.