KT5G-2P1114 Equivalent & Substitute Parts

Part Overview

The KT5G-2P1114 is a 10mm optical sensor manufactured by SICK, Inc., featuring PNP output configuration and green light source (520nm). This component operates across a 10V to 30V supply range with 50µs response time and IP67 ingress protection. The product is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional compatibility within system designs.

Substiute Parts

KT5G-2P1114

SICK, Inc.In Stock: 1001KT5G-2P1114 Datasheet

Current PartRFQ

1078066

SICK, Inc.In Stock: 8811078066 Datasheet

MFR RecommendedRFQ

1078097

SICK, Inc.In Stock: 8601078097 Datasheet

MFR RecommendedRFQ

1078122

SICK, Inc.In Stock: 10431078122 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KT5G-2P1114 is determined by the following critical parameters:

• Output Configuration: PNP compatibility is mandatory for direct substitution
• Connection Method: M12 connector requirement ensures mechanical and electrical interface compatibility
• Ingress Protection: IP67 rating must be maintained for environmental sealing
• Voltage Supply Range: Substitute must operate within or encompass the 10V ~ 30V supply specification
• Sensing Distance: Optical sensors with 0.512" (13mm) sensing distance represent a functional extension of the 10mm capability

The three substitute parts (1078066, 1078097, 1078122) are manufacturer-recommended alternatives from SICK, Inc. Parts 1078066 and 1078097 feature PNP output with Dark-ON/Light-ON capability. Part 1078122 offers Push-Pull output with selectable NPN/PNP configuration, providing broader application flexibility. All three maintain M12 connector interface, IP67 protection, and active product status.

Parameter Comparison

Engineering Selection Recommendations

1078066 and 1078097: Both parts are functionally equivalent alternatives with identical electrical and mechanical specifications. These sensors feature PNP output with Dark-ON/Light-ON switching modes, RGB LED light source, and active product status with ROHS3 compliance. The 13mm sensing distance represents a 30% extension compared to the original 10mm specification. Response time improvement from 50µs to 10µs provides enhanced detection speed. Operating temperature range expansion to -20°C ~ 60°C accommodates broader environmental conditions. Selection between these two parts may be determined by packaging preference (Box) and cable length availability (196.85" / 5m).

1078122: This sensor offers Push-Pull output with configurable NPN/PNP operation, providing greater circuit integration flexibility. The KTS Prime series designation indicates product line advancement. Identical sensing distance (13mm), response time (10µs), voltage range (10.8V ~ 28.8V), M12 connector, and IP67 protection align with the other substitute options. Active product status and RGB LED light source ensure long-term component availability. The absence of cable length specification and packaging designation as Bulk may influence procurement decisions based on system integration requirements.

All three substitute parts maintain manufacturer continuity (SICK, Inc.), M12 connector compatibility, and IP67 environmental sealing. Selection should prioritize active product status and compliance certifications for new designs.

Frequently Asked Questions (FAQ)

Q: Can the KT5G-2P1114 be directly replaced with 1078066 or 1078097?

A: Yes, with application review. Both parts maintain PNP output configuration, M12 connector interface, IP67 ingress protection, and compatible voltage supply ranges (10.8V ~ 28.8V encompasses the original 10V ~ 30V specification). The 13mm sensing distance represents a functional extension. Response time improvement (10µs vs. 50µs) and expanded operating temperature range (-20°C ~ 60°C vs. -10°C ~ 55°C) provide performance benefits. RGB LED light source differs from the original green (520nm) specification and requires optical compatibility verification in the application.

Q: What is the difference between 1078066/1078097 and 1078122?

A: Parts 1078066 and 1078097 feature PNP output with Dark-ON/Light-ON switching modes. Part 1078122 provides Push-Pull output with selectable NPN/PNP configuration. All three maintain identical sensing distance (13mm), response time (10µs), voltage supply range (10.8V ~ 28.8V), M12 connector, and IP67 protection. The output configuration difference determines circuit compatibility and signal processing requirements.

Q: Are there packaging or availability differences among the substitute parts?

A: Yes. Parts 1078066 and 1078097 are supplied in Box packaging with 196.85" (5m) cable length. Part 1078122 is supplied in Bulk packaging without specified cable length. Inventory levels differ: 1078066 (806 Pcs), 1078097 (782 Pcs), and 1078122 (1030 Pcs). Packaging and cable configuration should be evaluated against system integration requirements.

Q: Does the RGB LED light source affect substitution compatibility?

A: The RGB LED light source in all substitute parts differs from the original green (520nm) specification. RGB LED capability provides wavelength flexibility but requires verification that the target application's optical properties (reflectivity, color sensitivity, contrast detection) remain compatible. System-level testing is necessary to confirm performance equivalence in the specific application environment.

Q: What compliance certifications apply to the substitute parts?

A: Parts 1078066 and 1078097 carry ROHS3 compliance and REACH Unaffected status. Part 1078122 compliance certifications are not specified in the provided data. All three parts are active products from SICK, Inc., ensuring ongoing manufacturer support and component availability.