KSL0M212 Equivalent & Substitute Parts

Part Overview

The KSL0M212 is a tactile switch manufactured by C&K, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a contact rating of 0.05A at 32VDC. This component features top actuation, through-hole mounting, and an IP65 ingress protection rating suitable for dust-tight and water-resistant applications.

The KSL0M212 carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

KSL0M212

C&KIn Stock: 855KSL0M212 Datasheet

Current PartRFQ

KSL0M212LFT

C&KIn Stock: 17826KSL0M212LFT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KSL0M212 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

• Circuit configuration (SPST-NO)
• Contact rating (0.05A @ 32VDC)
• Switch function (Off-Mom momentary operation)
• Mounting type (Through Hole)
• Physical dimensions (7.40mm x 7.40mm outline, 9.90mm actuator height)
• Operating force (130gf)
• Ingress protection rating (IP65)
• Operating temperature range (-40°C ~ 90°C)
• Switch travel (0.50mm)
• Mechanical life (500,000 cycles)
• Termination style (PC Pin)

The KSL0M212LFT meets all these criteria and is classified as a direct substitute within the same KSL MKII series.

Parameter Comparison

Engineering Selection Recommendations

The KSL0M212LFT is the direct substitute for the obsolete KSL0M212. Both components are electrically and mechanically identical across all specified parameters. The primary distinction is product status and regulatory compliance.

The KSL0M212LFT is currently in active production status, ensuring availability for new designs and ongoing supply requirements. Additionally, the KSL0M212LFT carries ROHS3 compliance, meeting current environmental and regulatory standards, whereas the KSL0M212 is RoHS non-compliant.

For applications requiring the electrical and mechanical characteristics of the KSL0M212, the KSL0M212LFT provides full functional equivalence with the added benefit of active product status and modern compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the KSL0M212LFT be used as a direct replacement for the KSL0M212?

A: Yes. The KSL0M212LFT is electrically and mechanically equivalent to the KSL0M212 across all specified parameters, including circuit configuration, contact rating, physical dimensions, operating force, and mechanical life. Both components are members of the KSL MKII series and share identical through-hole mounting characteristics.

Q: What is the primary difference between these two parts?

A: The KSL0M212 is obsolete, while the KSL0M212LFT is in active production. Additionally, the KSL0M212LFT is ROHS3 compliant, whereas the KSL0M212 is RoHS non-compliant. All electrical and mechanical specifications remain identical.

Q: Are there packaging differences between the KSL0M212 and KSL0M212LFT?

A: The KSL0M212LFT is supplied in bulk packaging. The original KSL0M212 packaging specification is not provided in the available data.

Q: What certifications apply to both parts?

A: Both the KSL0M212 and KSL0M212LFT carry REACH Unaffected status and are classified under ECCN EAR99. Both have a Moisture Sensitivity Level (MSL) of 1 (Unlimited). The KSL0M212LFT additionally carries ROHS3 compliance.

Q: Are the mechanical and electrical specifications identical?

A: Yes. Both parts maintain identical specifications for circuit configuration (SPST-NO), contact rating (0.05A @ 32VDC), operating force (130gf), switch travel (0.50mm), mechanical life (500,000 cycles), operating temperature range (-40°C ~ 90°C), and ingress protection rating (IP65).