KPT07F14-5P Equivalent & Substitute Parts

Part Overview

The KPT07F14-5P is a 5-position circular connector receptacle manufactured by ITT Cannon, LLC, featuring male pins with solder cup termination. This connector is designed for panel mount applications with bulkhead front-side nut fastening and bayonet lock coupling. The part is currently active in production with 866 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

KPT07F14-5P

ITT Cannon, LLCIn Stock: 933KPT07F14-5P Datasheet

Current PartRFQ

MSW07E14-5P-SR

Milspecwest, LLCIn Stock: 970MSW07E14-5P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KPT07F14-5P is determined by strict alignment of the following critical parameters:

• Number of Positions: Must be 5
• Shell Size - Insert: Must be 14-5
• Connector Type: Must be Receptacle with Male Pins
• Mounting Type: Must be Panel Mount with Bulkhead - Front Side Nut
• Fastening Type: Must be Bayonet Lock
• Operating Temperature Range: Must support -55°C ~ 125°C
• Current Rating: Must support minimum 13A
• Voltage Rating: Must support minimum 1000VAC or 1400VDC
• Shell Material: Aluminum or Aluminum Alloy
• Product Status: Must be Active

The MSW07E14-5P-SR meets the core mechanical and electrical compatibility criteria for substitution. Both connectors share identical position count, shell size, mounting configuration, fastening mechanism, and operating temperature range. Current and voltage ratings are equivalent or exceed minimum requirements. Differences in contact finish material and termination method are noted but do not preclude functional substitution in applications where these variations are acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both the KPT07F14-5P and MSW07E14-5P-SR are active production parts with established supply chains. Selection between these connectors should be based on application-specific voltage requirements and contact finish specifications.

The KPT07F14-5P with gold contact finish and 1000VAC/1400VDC rating is suitable for high-voltage applications and environments requiring superior corrosion resistance. The MSW07E14-5P-SR with cadmium contact finish and 800V rating is suitable for standard industrial applications within its voltage specification. Both parts maintain identical mechanical compatibility, operating temperature range, and current capacity.

RoHS non-compliance status is equivalent for both parts. Moisture sensitivity level differs (KPT07F14-5P: MSL 1; MSW07E14-5P-SR: Not Applicable), which may influence storage and handling procedures depending on assembly environment requirements.

Frequently Asked Questions (FAQ)

Q: Can the MSW07E14-5P-SR directly replace the KPT07F14-5P in all applications?

A: Mechanical and thermal compatibility is confirmed. Voltage rating compatibility must be verified: the substitute part is rated for 800V maximum, while the original part supports 1000VAC/1400VDC. Applications exceeding 800V require the original KPT07F14-5P. Contact finish differences (gold vs. cadmium) may affect performance in corrosive environments.

Q: What are the key differences between these two connectors?

A: Primary differences are contact finish material (gold vs. cadmium), voltage rating (1000VAC/1400VDC vs. 800V), and moisture sensitivity classification. Mechanical parameters including position count, shell size, mounting configuration, and fastening type are identical.

Q: Are both connectors suitable for military applications?

A: Both parts are RoHS non-compliant and carry EAR99 ECCN classification. The MSW07E14-5P-SR is explicitly listed for military applications. The KPT07F14-5P series is established in military connector applications. Application-specific military specification compliance must be verified independently.

Q: What is the difference between solder cup and solder termination?

A: Both termination methods enable wire attachment through solder. Solder cup termination features a cup-shaped contact designed to accept wire insertion before soldering. Standard solder termination uses direct contact soldering. Both methods are functionally compatible for circuit board assembly.

Q: How should moisture sensitivity be considered when selecting between these parts?

A: The KPT07F14-5P is classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The MSW07E14-5P-SR is classified as Not Applicable. For applications in controlled assembly environments, both parts are suitable. For applications with extended storage in high-humidity conditions, the KPT07F14-5P offers explicit moisture tolerance specification.