KPT07B14-5P Equivalent & Substitute Parts

Part Overview

The KPT07B14-5P is a 5-position circular connector receptacle manufactured by ITT Cannon, LLC. This component features male pins with solder cup termination, designed for panel mount applications with bayonet lock fastening. The connector is rated for 13A at 1000VAC/1400VDC and operates across -55°C to 125°C. As an active product with 891 units in stock, substitute parts may be required for supply chain optimization, design flexibility, or application-specific requirements where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

KPT07B14-5P

ITT Cannon, LLCIn Stock: 947KPT07B14-5P Datasheet

Current PartRFQ

MSW07A14-5P-SR

Milspecwest, LLCIn Stock: 1006MSW07A14-5P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KPT07B14-5P is determined by the following critical parameters:

• Number of Positions: Must be 5
• Shell Size - Insert: Must be 14-5
• Connector Type: Must be Receptacle with Male Pins
• Fastening Type: Must be Bayonet Lock
• Mounting Type: Must be Panel Mount with Bulkhead - Front Side Nut
• Current Rating: Must support minimum 13A
• Voltage Rating: Must support minimum 1000VAC or 1400VDC
• Operating Temperature Range: Must encompass -55°C to 125°C
• Termination: Solder-based termination acceptable

The substitute part MSW07A14-5P-SR meets these core electrical and mechanical compatibility criteria, enabling direct substitution in applications requiring equivalent connector functionality.

Parameter Comparison

Engineering Selection Recommendations

KPT07B14-5P (Primary Selection)

The KPT07B14-5P remains the primary specification for applications requiring the full voltage rating of 1000VAC/1400VDC. This part is active with established inventory (891 units) and maintains gold contact finish for enhanced mating reliability. Both the main part and substitute are RoHS non-compliant, indicating compatibility in legacy or military-grade applications.

MSW07A14-5P-SR (Substitute Selection)

The MSW07A14-5P-SR is suitable as a substitute only in applications where the voltage requirement does not exceed 800V. While this part maintains electrical compatibility at 13A current rating and identical operating temperature range, the reduced voltage specification and cadmium contact finish represent functional differences. The substitute is also active with 923 units in inventory. Selection of this substitute requires confirmation that the 800V maximum voltage rating is acceptable for the intended application.

Frequently Asked Questions (FAQ)

Q: Can MSW07A14-5P-SR be used as a direct replacement for KPT07B14-5P?

A: MSW07A14-5P-SR is mechanically and electrically compatible for applications operating at 800V or below. Applications requiring the full 1000VAC/1400VDC rating of the KPT07B14-5P must use the original specification.

Q: What is the difference between Receptacle and Plug connector types in this comparison?

A: The KPT07B14-5P is a Receptacle with male pins, while MSW07A14-5P-SR is a Plug with male pins. Both are 5-position connectors with 14-5 shell size and bayonet lock fastening, maintaining mechanical compatibility at the panel mount interface.

Q: Are the contact finishes interchangeable?

A: The KPT07B14-5P features gold contact finish (50.0µin thickness), while MSW07A14-5P-SR uses cadmium finish. Gold provides superior corrosion resistance and mating reliability. Contact finish selection depends on environmental exposure and application requirements.

Q: What is the voltage rating difference between these parts?

A: The KPT07B14-5P is rated for 1000VAC and 1400VDC. The MSW07A14-5P-SR is rated for 800V maximum. Verify that your application voltage does not exceed 800V before selecting the substitute.

Q: Are both parts suitable for military applications?

A: Both parts are RoHS non-compliant and feature bayonet lock fastening typical of military-grade connectors. MSW07A14-5P-SR is explicitly listed for military applications. Confirm compliance with specific military specifications (MIL-DTL standards) required by your application.

Q: What is the difference in packaging?

A: The KPT07B14-5P packaging is not specified in the data. MSW07A14-5P-SR is supplied in Bag packaging. Confirm packaging requirements for your procurement and assembly processes.