KPT06F14-5P Equivalent & Substitute Parts

Part Overview

The KPT06F14-5P is a 5-position circular connector plug manufactured by ITT Cannon, LLC, featuring male pins with solder cup termination. This connector is designed for free-hanging, in-line applications requiring bayonet lock fastening and environmental resistance. The part is currently active in production with 680 units in stock. Substitute parts may be required due to supply chain considerations, inventory availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Plug, Male Pins
Number of Positions	5
Shell Size - Insert	14-5
Mounting Type	Free Hanging (In-Line)
Termination	Solder Cup
Fastening Type	Bayonet Lock
Current Rating	13A
Voltage Rating	1000VAC, 1400VDC
Operating Temperature	-55°C ~ 125°C
Shell Material	Aluminum Alloy
Contact Finish - Mating	Gold
Ingress Protection	Environment Resistant
Features	Strain Relief

Substitute Part Grouping Explanation

Substitution eligibility for the KPT06F14-5P is determined by strict equivalence across the following critical parameters:

Connector Type & Position Count: Must be plug configuration with 5 positions
Shell Size - Insert: Must match 14-5 specification for mechanical compatibility
Mounting Type: Must support free-hanging, in-line installation
Fastening Type: Must use bayonet lock mechanism
Current & Voltage Ratings: Must meet or exceed 13A and 1000VAC/1400VDC specifications
Operating Temperature Range: Must support -55°C ~ 125°C
Ingress Protection: Must provide environment resistant capability
Termination Method: Solder-based termination acceptable (solder cup or solder pin variants)

The MSW06E14-5P-SR qualifies as a substitute based on these parameters. Both parts share identical position count, shell size, mounting configuration, fastening mechanism, current rating, temperature range, and environmental protection characteristics.

Parameter Comparison

Parameter	KPT06F14-5P (Main Part)	MSW06E14-5P-SR (Substitute)	Compatibility
Manufacturer	ITT Cannon, LLC	Milspecwest, LLC	Different manufacturers
Connector Type	Plug, Male Pins	Plug, Male Pins	Equivalent
Number of Positions	5	5	Equivalent
Shell Size - Insert	14-5	14-5	Equivalent
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Equivalent
Termination	Solder Cup	Solder	Compatible
Fastening Type	Bayonet Lock	Bayonet Lock	Equivalent
Current Rating (Amps)	13A	13A	Equivalent
Voltage Rating	1000VAC, 1400VDC	800V	Main part exceeds substitute
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	Equivalent
Shell Material	Aluminum Alloy	Aluminum	Compatible
Contact Finish - Mating	Gold	Cadmium	Different finishes
Ingress Protection	Environment Resistant	Environment Resistant	Equivalent
Features	Strain Relief	Strain Relief	Equivalent
RoHS Status	RoHS non-compliant	RoHS non-compliant	Equivalent

Engineering Selection Recommendations

Both the KPT06F14-5P and MSW06E14-5P-SR are active production parts with RoHS non-compliant status. Selection between these parts should be based on the following considerations:

KPT06F14-5P is the primary specification with gold contact finish mating surfaces and higher voltage rating (1000VAC, 1400VDC). This part is suitable for applications requiring superior contact reliability and higher voltage tolerance.

MSW06E14-5P-SR provides mechanical and electrical equivalence with cadmium contact finish and 800V voltage rating. This substitute is suitable for applications where voltage requirements do not exceed 800V and cadmium contact finish is acceptable. The substitute offers 819 units in stock compared to 680 units for the main part.

Both parts maintain identical current rating (13A), operating temperature range (-55°C ~ 125°C), and environmental protection characteristics. Substitution is valid when application voltage requirements do not exceed 800V and contact finish material compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: Can MSW06E14-5P-SR be used as a direct replacement for KPT06F14-5P?

A: MSW06E14-5P-SR is mechanically and electrically compatible for applications operating at 800V or below. The main part supports higher voltage (1000VAC, 1400VDC). Verify application voltage requirements before substitution.

Q: What are the key differences between these two connectors?

A: The primary differences are contact finish material (gold vs. cadmium) and maximum voltage rating (1400VDC vs. 800V). All other parameters including position count, shell size, mounting type, current rating, and operating temperature are equivalent.

Q: Are both parts suitable for military applications?

A: Both parts are RoHS non-compliant and designed for environmental resistance. MSW06E14-5P-SR is specified for military applications. Confirm specific military standard compliance requirements for your application.

Q: What is the difference between solder cup and solder termination?

A: Both termination methods use solder for electrical connection. Solder cup termination features a cup-shaped contact designed for wire insertion and soldering. Both methods are compatible for this connector series.

Q: How do I determine which part to use?

A: Use KPT06F14-5P as the primary specification. Use MSW06E14-5P-SR as a substitute only when application voltage does not exceed 800V and cadmium contact finish is acceptable for your circuit requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message