KN01M16SH-G Equivalent & Substitute Parts

Part Overview

The KN01M16SH-G is a female insert connector without contacts in the 16-position M size configuration, manufactured by JAE Electronics as part of the KN01 heavy duty connector series. This component is classified as obsolete and is no longer in active production. Due to its obsolete status, sourcing original stock becomes increasingly difficult. Identifying active equivalent parts ensures design continuity and maintains supply chain reliability for applications requiring this connector type.

Substiute Parts

KN01M16SH-G

JAE ElectronicsIn Stock: 1164KN01M16SH-G Datasheet

Current PartRFQ

KN01M16SH-G-RK

JAE ElectronicsIn Stock: 1206KN01M16SH-G-RK Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KN01M16SH-G is determined by strict alignment of the following critical parameters:

• Connector Type: Insert without Contacts
• Gender: Female
• Number of Positions: 16
• Size: M
• Termination Style: Crimp
• Operating Temperature Range: -20°C ~ 105°C
• Housing Material: Resin
• Manufacturer Series: KN01

The substitute part KN01M16SH-G-RK maintains identical specifications across all these parameters, ensuring mechanical and electrical compatibility within the KN01 connector ecosystem.

Parameter Comparison

Engineering Selection Recommendations

The KN01M16SH-G-RK is the direct active equivalent for the obsolete KN01M16SH-G. Both components share identical mechanical and electrical specifications within the KN01 series architecture.

The primary distinction is product status and compliance posture. The KN01M16SH-G-RK carries active product status with RoHS compliance certification (RoHS Compliant, MSL 1 Unlimited), whereas the original part is obsolete and RoHS non-compliant. For new designs or production continuity requiring regulatory compliance, the KN01M16SH-G-RK is the appropriate selection. The substitute part is available in bulk packaging with confirmed inventory of 1128 pieces.

Frequently Asked Questions (FAQ)

Q: Can KN01M16SH-G-RK be used as a direct replacement for KN01M16SH-G?

A: Yes. Both parts are female 16-position M-size inserts without contacts in the KN01 series with crimp termination. All mechanical and electrical parameters are identical, including operating temperature range and housing material.

Q: What is the difference between these two part numbers?

A: The KN01M16SH-G-RK is the active production equivalent. It carries RoHS compliance certification and MSL 1 rating, whereas the original KN01M16SH-G is obsolete and RoHS non-compliant. The substitute part is available in bulk packaging.

Q: Are there any compatibility concerns when switching from KN01M16SH-G to KN01M16SH-G-RK?

A: No compatibility concerns exist. The parts are functionally and mechanically interchangeable within KN01 connector assemblies. Both maintain the same 16-position configuration, M size, and crimp termination interface.

Q: What does "Insert without Contacts" mean?

A: This refers to the connector housing shell without pre-installed contact pins or sockets. Contacts are installed separately during assembly, allowing customization of contact types and materials for specific application requirements.

Q: Why is RoHS compliance important for this substitution?

A: RoHS compliance indicates the part meets restrictions on hazardous substances in electrical and electronic equipment. For applications subject to regulatory requirements or customer specifications mandating RoHS compliance, the KN01M16SH-G-RK is the required selection.