KMPC8315CVRAGDA Equivalent & Substitute Parts

Part Overview

The KMPC8315CVRAGDA is a PowerPC e300c3 microprocessor IC from the MPC83xx series, featuring a single 32-bit core operating at 400MHz in a 620-HBGA package. This embedded processor integrates dual Gigabit Ethernet ports, dual SATA 3Gbps interfaces, USB 2.0 with PHY, and multiple serial communication protocols including DUART, I2C, PCI, SPI, and TDM. The main part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain system availability and support continuity.

Substiute Parts

KMPC8315CVRAGDA

NXP USA Inc.In Stock: 1153KMPC8315CVRAGDA Datasheet

Current PartRFQ

MPC8315CVRAGDA

NXP USA Inc.In Stock: 1667MPC8315CVRAGDA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KMPC8315CVRAGDA is determined by strict equivalence across the following critical parameters:

• Core processor architecture (PowerPC e300c3)
• Core count and bus width (1 Core, 32-Bit)
• Operating frequency (400MHz)
• Memory controller support (DDR, DDR2)
• Ethernet capability (10/100/1000Mbps dual ports)
• SATA interface (SATA 3Gbps dual ports)
• USB interface (USB 2.0 with PHY)
• I/O voltage levels (1.8V, 2.5V, 3.3V)
• Operating temperature range (-40°C ~ 105°C)
• Physical package (620-BBGA Exposed Pad)
• Serial interface support (DUART, I2C, PCI, SPI, TDM)
• Environmental compliance (ROHS3, MSL 3)

Parameter Comparison

Engineering Selection Recommendations

The MPC8315CVRAGDA is the direct equivalent substitute for the obsolete KMPC8315CVRAGDA. Both parts are manufactured by NXP USA Inc. and share identical electrical, mechanical, and functional specifications across all critical parameters. The substitute part maintains active product status, ensuring continued availability and supply chain support. Both parts comply with ROHS3 environmental standards and carry equivalent moisture sensitivity ratings. Selection of the MPC8315CVRAGDA eliminates obsolescence risk while preserving full functional compatibility with existing designs.

Frequently Asked Questions (FAQ)

Q: Are KMPC8315CVRAGDA and MPC8315CVRAGDA pin-for-pin compatible?

A: Yes. Both parts use the 620-BBGA Exposed Pad package with identical pinout, electrical characteristics, and interface specifications. Direct substitution is supported without PCB redesign.

Q: What is the primary difference between these parts?

A: The KMPC8315CVRAGDA is classified as obsolete, while the MPC8315CVRAGDA maintains active product status. The substitute part provides equivalent functionality with ongoing manufacturer support and availability.

Q: Can the MPC8315CVRAGDA be used in applications originally designed for KMPC8315CVRAGDA?

A: Yes. Identical core processor architecture, clock frequency, memory controllers, Ethernet, SATA, USB interfaces, and operating temperature range ensure full functional equivalence. No design modifications are required.

Q: Are there packaging differences between these parts?

A: The main part is supplied in standard packaging, while the substitute is supplied in Tray packaging. Both use the 620-HBGA (29x29) physical package. Tray packaging is standard for active production parts and does not affect electrical or mechanical compatibility.

Q: Do both parts meet the same environmental compliance standards?

A: Yes. Both parts are ROHS3 compliant and carry MSL 3 (168 Hours) moisture sensitivity ratings, ensuring equivalent environmental qualification for industrial and commercial applications.