KMPC8314VRAGDA Equivalent & Substitute Parts

Part Overview

The KMPC8314VRAGDA is a PowerPC e300c3 microprocessor IC from the MPC83xx series, featuring a single 32-bit core operating at 400MHz in a 620-HBGA package. This embedded processor integrates dual Gigabit Ethernet ports, USB 2.0 with PHY, DDR/DDR2 memory controllers, and multiple communication interfaces including DUART, HSSI, I2C, PCI, SPI, and TDM. The main part number KMPC8314VRAGDA is classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new design implementations.

Substiute Parts

KMPC8314VRAGDA

NXP USA Inc.In Stock: 771KMPC8314VRAGDA Datasheet

Current PartRFQ

MPC8314VRAGDA

NXP USA Inc.In Stock: 1668MPC8314VRAGDA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KMPC8314VRAGDA is determined by strict equivalence across the following critical parameters:

• Processor Architecture: PowerPC e300c3 core with identical instruction set
• Core Configuration: Single 32-bit core at 400MHz
• Memory Interface: DDR and DDR2 controller support
• Ethernet Capability: Dual 10/100/1000Mbps ports
• USB Interface: USB 2.0 with integrated PHY
• I/O Voltage Levels: 1.8V, 2.5V, 3.3V compatibility
• Operating Temperature Range: 0°C to 105°C
• Package Specification: 620-HBGA (29x29) form factor with exposed pad
• Interface Set: DUART, HSSI, I2C, PCI, SPI, TDM support
• Compliance Standards: ROHS3 and REACH requirements

The substitute part MPC8314VRAGDA maintains complete electrical and mechanical compatibility with the obsolete KMPC8314VRAGDA, differing only in product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The MPC8314VRAGDA is the direct active equivalent for the obsolete KMPC8314VRAGDA. Both parts are manufactured by NXP USA Inc. and maintain identical electrical specifications, core architecture, clock frequency, memory interface capabilities, and peripheral integration. The substitute part carries Active product status, ensuring continued availability and manufacturer support.

Both parts satisfy ROHS3 compliance and REACH requirements. The primary distinction is packaging configuration: the main part is supplied in bulk format, while the substitute is supplied in tray packaging. This packaging difference does not affect electrical or mechanical compatibility.

For applications currently using KMPC8314VRAGDA, direct substitution with MPC8314VRAGDA is supported without design modification or re-qualification, provided that tray packaging is acceptable for procurement and assembly workflows.

Frequently Asked Questions (FAQ)

Q: Can MPC8314VRAGDA replace KMPC8314VRAGDA in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The substitute maintains the same PowerPC e300c3 core, 400MHz clock speed, DDR/DDR2 memory controllers, dual Gigabit Ethernet, USB 2.0 interface, and 620-HBGA package footprint. No design changes are required.

Q: What is the difference between KMPC8314VRAGDA and MPC8314VRAGDA?

A: The primary difference is product status and packaging. KMPC8314VRAGDA is obsolete and supplied in bulk packaging. MPC8314VRAGDA is active and supplied in tray packaging. All electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical Moisture Sensitivity Level (MSL) ratings of 3 (168 Hours). Compliance certifications are equivalent.

Q: Does the 620-HBGA (29x29) package remain the same?

A: Yes. Both parts use the identical 620-HBGA (29x29) package with exposed pad configuration. PCB footprint, solder pad layout, and thermal characteristics are unchanged.

Q: Is the operating temperature range the same?

A: Yes. Both parts operate across the identical temperature range of 0°C to 105°C (TA).

Q: Are the I/O voltage levels compatible?

A: Yes. Both parts support identical I/O voltage levels: 1.8V, 2.5V, and 3.3V.