KBPC15005-G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The KBPC15005-G is a single-phase bridge rectifier manufactured by Comchip Technology, designed for general-purpose rectification applications. It features a 50 V peak reverse voltage rating and 15 A average rectified current capacity. The component is housed in a 4-Square KBPC package with QC Terminal mounting. This part is currently Active in product status and fully compliant with RoHS3 and REACH regulations. Alternative equivalent parts may be required due to inventory availability, supply chain considerations, or specific application mounting preferences.

Substiute Parts

KBPC15005-G

Comchip TechnologyIn Stock: 1128KBPC15005-G Datasheet

Current PartRFQ

KBPC15005

Good-Ark SemiconductorIn Stock: 1474KBPC15005 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent substitution for the KBPC15005-G is determined by strict alignment of electrical and mechanical parameters. The critical substitution criteria are:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 50 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 7.5 A
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Package / Case: 4-Square, KBPC

Parts meeting all these parameters are classified as parametric equivalents and are suitable for direct substitution in applications where the KBPC15005-G is specified.

Parameter Comparison

Engineering Selection Recommendations

The KBPC15005 manufactured by Good-Ark Semiconductor is a parametric equivalent to the KBPC15005-G. Both parts share identical electrical specifications, temperature operating range, and regulatory compliance status (RoHS3 and REACH). Both components are Active in product status, ensuring ongoing availability and support.

The primary distinction between these parts is the mounting type: the KBPC15005-G features QC Terminal mounting, while the Good-Ark KBPC15005 uses Chassis Mount. Component selection should be based on the specific mounting requirements of the target application. Both parts are suitable for applications requiring 50 V, 15 A single-phase bridge rectification with standard technology.

Frequently Asked Questions (FAQ)

Q: Can the KBPC15005 (Good-Ark) directly replace the KBPC15005-G (Comchip) in my circuit?

A: The parts are parametric equivalents with identical electrical characteristics. Compatibility depends on mounting type requirements. If your application uses QC Terminal mounting, the original KBPC15005-G is specified. If Chassis Mount is acceptable, the Good-Ark KBPC15005 is suitable.

Q: What are the critical parameters for bridge rectifier substitution?

A: For the KBPC15005 series, the critical parameters are peak reverse voltage (50 V), average rectified current (15 A), forward voltage drop (1.1 V @ 7.5 A), reverse leakage current (10 µA @ 50 V), and operating temperature range (-55°C ~ 150°C). All substitute parts must match these specifications exactly.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the KBPC15005-G and KBPC15005 are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What is the difference between QC Terminal and Chassis Mount?

A: QC Terminal and Chassis Mount refer to different mechanical mounting interfaces. QC Terminal uses quick-connect terminals, while Chassis Mount uses a different fastening method. Selection depends on your PCB or assembly design requirements.

Q: Are there inventory considerations between these parts?

A: Both parts are currently in stock. The KBPC15005-G has 1074 pieces available, while the KBPC15005 has 1408 pieces available. Inventory levels may change; consult current stock status for procurement planning.