KBPC10/15/2506FP Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The KBPC10/15/2506FP is a single-phase bridge rectifier manufactured by Diotec Semiconductor, designed for chassis mount applications. This component operates at 600 V peak reverse voltage with a 25 A average rectified current rating and maintains an operating temperature range of -50°C to 150°C. The part is currently active in production with 973 units in stock.

Substitute parts are identified when equivalent electrical performance is required but alternative mounting configurations or packaging formats are necessary to meet specific application requirements. The KBPC10/15/2506FP is available as a chassis mount variant, with through-hole mounting alternatives available in the same electrical specification class.

Substiute Parts

KBPC10/15/2506FP

Diotec SemiconductorIn Stock: 1031KBPC10/15/2506FP Datasheet

Current PartRFQ

KBPC10/15/2506WP

Diotec SemiconductorIn Stock: 768KBPC10/15/2506WP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KBPC10/15/2506FP is determined by electrical parameter equivalence across the following criteria:

Electrical Equivalence Requirements:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max) @ If: 1.2 V @ 12.5 A
• Current - Reverse Leakage @ Vr: 10 µA @ 600 V
• Operating Temperature Range: -50°C to 150°C (TJ)

Mechanical Variation Allowed:

• Mounting Type: Chassis Mount or Through Hole
• Package / Case: 4-Square KBPC variants (FP or standard KBPC)

The KBPC10/15/2506WP qualifies as a parametric equivalent substitute because it maintains identical electrical specifications while offering a through-hole mounting configuration in place of the chassis mount design.

Parameter Comparison

Engineering Selection Recommendations

Both the KBPC10/15/2506FP and KBPC10/15/2506WP are active production components from Diotec Semiconductor with identical electrical specifications. Selection between these parts is determined by mounting requirements:

KBPC10/15/2506FP is specified for applications requiring chassis mount configuration with direct panel or heatsink attachment via the 4-Square KBPC FP package format.

KBPC10/15/2506WP is specified for applications requiring through-hole PCB mounting with the standard 4-Square KBPC package format.

Both parts maintain equivalent rectification performance, voltage ratings, current capacity, and thermal operating range. Neither part carries RoHS applicability or moisture sensitivity classification. REACH status is vendor undefined for both variants.

Frequently Asked Questions (FAQ)

Q: Can KBPC10/15/2506WP replace KBPC10/15/2506FP in all applications?

A: Electrical substitution is valid only if the application PCB layout and mounting structure support through-hole connection. The KBPC10/15/2506WP requires PCB through-hole pads and does not provide chassis mount capability. Mechanical compatibility must be verified against the specific application design.

Q: What is the difference between the FP and standard KBPC package designations?

A: The FP designation indicates a chassis mount variant with direct mounting provisions. The standard KBPC designation indicates a through-hole PCB mount variant. Both maintain the 4-Square physical form factor and identical electrical performance.

Q: Are the electrical characteristics identical between these two parts?

A: Yes. Peak reverse voltage (600 V), average rectified current (25 A), forward voltage drop (1.2 V @ 12.5 A), reverse leakage current (10 µA @ 600 V), and operating temperature range (-50°C to 150°C) are identical across both variants.

Q: Which part should be selected for new designs?

A: Selection depends on the application's mounting architecture. For PCB-based designs with through-hole capability, the KBPC10/15/2506WP is appropriate. For chassis or heatsink-mounted applications, the KBPC10/15/2506FP is appropriate. Both are active production parts with equivalent availability and support.

Q: Is there any compliance or certification difference between these parts?

A: Both parts share identical RoHS status (not applicable), moisture sensitivity level (not applicable), and REACH status (vendor undefined). No compliance differentiation exists between the two variants.