KBP2MI_T0_00101 Equivalent & Substitute Parts

Part Overview

The KBP2MI_T0_00101 is a single-phase bridge rectifier diode manufactured by Panjit International Inc., rated for 1 kV peak reverse voltage with 2 A average rectified current. This component is packaged in a 4-ESIP, KBP through-hole configuration and operates across a temperature range of -55°C to 150°C.

The KBP2MI_T0_00101 carries a product status designation of "Not For New Designs," indicating that this part is no longer recommended for new circuit development. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and support legacy system maintenance where this component is currently deployed.

Substiute Parts

KBP2MI_T0_00101

Panjit International Inc.In Stock: 3638KBP2MI_T0_00101 Datasheet

Current PartRFQ

KBP2M_T0_00101

Panjit International Inc.In Stock: 1648KBP2M_T0_00101 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KBP2MI_T0_00101 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 2 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 2 A
• Current - Reverse Leakage @ Vr: 5 µA @ 1000 V

Thermal Parameters:

• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: 4-ESIP, KBP

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Diode Type: Single Phase
• Technology: Standard

Parts that maintain identical values across all these parameters are classified as parametric equivalents and direct substitutes. The KBP2M_T0_00101 meets all substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

The KBP2M_T0_00101 is a direct parametric equivalent to the KBP2MI_T0_00101 and qualifies as a suitable substitute based on the following factors:

Electrical Equivalence: Both parts maintain identical voltage ratings (1 kV peak reverse), current ratings (2 A average rectified), forward voltage characteristics (1.1 V @ 2 A), and reverse leakage specifications (5 µA @ 1000 V).

Thermal Compatibility: Both parts operate across the same temperature range (-55°C to 150°C junction temperature), ensuring thermal performance equivalence in target applications.

Mechanical Compatibility: Both parts utilize identical through-hole mounting and 4-ESIP, KBP package configurations, enabling direct board-level substitution without layout modifications.

Compliance Alignment: Both parts maintain ROHS3 compliance, REACH unaffected status, and identical ECCN and HTSUS classifications, ensuring regulatory and supply chain consistency.

Product Status Consideration: While both parts carry "Not For New Designs" status, the KBP2M_T0_00101 remains available as a substitute for legacy system support and maintenance applications where the KBP2MI_T0_00101 is currently deployed.

Frequently Asked Questions (FAQ)

Q: Can the KBP2M_T0_00101 be used as a direct replacement for the KBP2MI_T0_00101?

A: Yes. The KBP2M_T0_00101 is a parametric equivalent with identical electrical, thermal, and mechanical specifications. Both parts are single-phase bridge rectifiers rated for 1 kV, 2 A, with matching forward voltage and reverse leakage characteristics. The through-hole 4-ESIP, KBP package configuration is identical, enabling direct board-level substitution.

Q: Are there any differences in compliance or regulatory status between these parts?

A: No. Both the KBP2MI_T0_00101 and KBP2M_T0_00101 maintain ROHS3 compliance, REACH unaffected status, and identical ECCN (EAR99) and HTSUS (8541.10.0080) classifications.

Q: What is the significance of the "Not For New Designs" product status?

A: This designation indicates that both parts are no longer recommended for incorporation into new circuit designs. However, they remain available for legacy system maintenance, repair, and support applications where these components are currently deployed.

Q: Are the packaging formats identical between these substitute parts?

A: Yes. Both parts are supplied in tube packaging with identical 4-ESIP, KBP through-hole package configurations. No mechanical or board-level modifications are required for substitution.

Q: What are the critical parameters that determine substitution eligibility?

A: Substitution is determined by equivalence across voltage ratings (1 kV peak reverse), current ratings (2 A average rectified), forward voltage characteristics (1.1 V @ 2 A), reverse leakage specifications (5 µA @ 1000 V), operating temperature range (-55°C to 150°C), mounting type (through hole), and package configuration (4-ESIP, KBP).