KBP210G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The KBP210G is a single-phase bridge rectifier manufactured by GeneSiC Semiconductor, designed for standard rectification applications requiring 1 kV peak reverse voltage and 2 A average rectified current. The device is housed in a 4-SIP KBP through-hole package and operates across a temperature range of -55°C to 150°C. This part maintains Active product status and is RoHS Compliant.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across all critical parameters. Alternative sources may be required due to inventory availability, supply chain considerations, or procurement preferences while maintaining identical functional specifications.

Substiute Parts

KBP210G

GeneSiC SemiconductorIn Stock: 20104KBP210G Datasheet

Current PartRFQ

KBP210G-G

Comchip TechnologyIn Stock: 1457KBP210G-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KBP210G are identified based on strict parametric equivalence across the following critical criteria:

Electrical Parameters (Must Match Exactly):

• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 2 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 2 A
• Current - Reverse Leakage @ Vr: 10 µA @ 1000 V
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match Exactly):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, KBP

All substitute parts listed maintain identical electrical and mechanical specifications, ensuring direct functional interchangeability in circuit applications without design modification or performance degradation.

Parameter Comparison

Engineering Selection Recommendations

KBP210G (GeneSiC Semiconductor): Primary selection for applications requiring GeneSiC manufacturer sourcing. Active product status with 20,009 units in stock. RoHS Compliant certification. Suitable for standard single-phase bridge rectification at 1 kV / 2 A specifications.

KBP210G-G (Comchip Technology): Direct parametric equivalent with identical electrical and mechanical specifications. Active product status with 1,400 units in stock. ROHS3 Compliant certification with REACH Unaffected status. Selection appropriate when Comchip Technology sourcing is preferred or GeneSiC availability is constrained.

Both parts satisfy identical application requirements and circuit performance criteria. Selection between manufacturers is based on procurement policy, supply chain strategy, and inventory availability rather than technical performance differentiation.

Frequently Asked Questions (FAQ)

Q: Can KBP210G-G (Comchip) be used as a direct replacement for KBP210G (GeneSiC)?

A: Yes. Both parts maintain identical electrical parameters (1 kV peak reverse voltage, 2 A average rectified current, 1.1 V forward voltage, 10 µA reverse leakage) and mechanical specifications (4-SIP KBP through-hole package, -55°C to 150°C operating range). Direct substitution is supported without circuit modification.

Q: Are there packaging differences between these parts?

A: Both parts use the 4-SIP KBP through-hole package. GeneSiC KBP210G is supplied in standard packaging, while Comchip KBP210G-G is supplied in Bulk packaging. The physical component form factor and pin configuration are identical.

Q: What compliance certifications apply to each part?

A: KBP210G (GeneSiC) holds RoHS Compliant certification. KBP210G-G (Comchip) holds ROHS3 Compliant certification and is REACH Unaffected. Both parts carry EAR99 ECCN classification and 8541.10.0080 HTSUS code.

Q: Do these parts have different moisture sensitivity requirements?

A: No. Both parts are classified as Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity constraints for storage or handling.

Q: Which part should be selected based on inventory availability?

A: KBP210G (GeneSiC) has 20,009 units in stock. KBP210G-G (Comchip) has 1,400 units in stock. Selection should align with procurement lead time requirements and supply chain strategy.