KAM15ACG2A150FM

Part Overview

The KAM15ACG2A150FM is a 15 pF ceramic capacitor manufactured by KYOCERA AVX, rated for 100V operation with C0G/NP0 temperature coefficient characteristics. This component is specified for 0603 (1608 Metric) surface mount applications and is certified for automotive use under AEC-Q200 standards. The part is currently in active production status. Alternative manufacturer sources may be required due to inventory availability, supply chain optimization, or regional procurement preferences.

Substiute Parts

KAM15ACG2A150FM

KYOCERA AVXIn Stock: 1013KAM15ACG2A150FM Datasheet

Current PartRFQ

GCM1885C2A150FA16D

Murata ElectronicsIn Stock: 8210GCM1885C2A150FA16D Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part GCM1885C2A150FA16D manufactured by Murata Electronics is electrically and mechanically interchangeable with the primary part based on the following critical parameters:

Electrical Equivalence:

• Identical capacitance: 15 pF
• Identical tolerance: ±1%
• Identical voltage rating: 100V
• Identical temperature coefficient: C0G, NP0
• Identical operating temperature range: -55°C ~ 125°C

Mechanical Compatibility:

• Identical package designation: 0603 (1608 Metric)
• Identical mounting type: Surface Mount, MLCC
• Dimensions within acceptable tolerance: 1.60mm L × 0.80mm W (vs. 1.60mm L × 0.81mm W)
• Identical maximum thickness: 0.90mm

Compliance & Ratings:

• Both parts are AEC-Q200 certified for automotive applications
• Both parts are ROHS3 compliant
• Both parts have Moisture Sensitivity Level 1 (Unlimited)
• Identical HTSUS and ECCN classifications

Parameter Comparison

Engineering Selection Recommendations

Both the KAM15ACG2A150FM and GCM1885C2A150FA16D are active production parts with full automotive certification (AEC-Q200). Selection between these parts can be based on:

Procurement Factors:

• Inventory availability and lead time requirements
• Regional supplier relationships and pricing
• Supply chain continuity and second-source strategy

Compliance & Quality:

• Both parts meet ROHS3 compliance requirements for restricted substance control
• Both parts are classified as REACH Unaffected, indicating no regulatory compliance concerns
• Both parts carry identical moisture sensitivity ratings suitable for standard reflow soldering processes
• Both parts are certified for automotive applications with identical reliability standards

PCB Layout & Assembly:

• Interchangeable footprint compatibility on 0603 (1608 Metric) solder pads
• No design changes required when switching between manufacturers
• Identical thermal and electrical performance within specified operating range

Frequently Asked Questions (FAQ)

Q: Can GCM1885C2A150FA16D be directly substituted for KAM15ACG2A150FM without PCB redesign? A: Yes. Both parts share identical electrical ratings (15 pF, ±1%, 100V, C0G/NP0), operating temperature range (-55°C ~ 125°C), and package designation (0603, 1608 Metric). The dimensional difference of 0.01mm in width is within standard PCB pad tolerance and does not require layout modification.

Q: Are there any performance differences between these two ceramic capacitors? A: No. The specified electrical and mechanical parameters are identical. Both parts are AEC-Q200 certified for automotive reliability and have equivalent moisture sensitivity levels. Performance under the stated operating conditions is equivalent.

Q: What is C0G/NP0 temperature coefficient, and why is it important? A: C0G (IEC standard) and NP0 (EIA standard) are equivalent designations indicating a temperature coefficient of approximately 0 ppm/°C. This ensures stable capacitance across the full operating temperature range (-55°C ~ 125°C), making these parts suitable for precision analog circuits and automotive applications requiring predictable performance.

Q: Both parts are listed as ROHS3 compliant. What does this mean? A: ROHS3 compliance (EU Directive 2011/65/EU as amended) confirms that the parts contain no more than the specified maximum concentrations of restricted substances including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.

Q: What is Moisture Sensitivity Level 1, and how does it affect handling? A: Moisture Sensitivity Level 1 (unlimited shelf life) is the lowest moisture sensitivity classification. These parts require no special moisture-controlled storage conditions and can be stored and handled under standard industrial conditions without moisture conditioning or reflow time restrictions.

Q: Are both parts suitable for automotive applications? A: Yes. Both parts are AEC-Q200 qualified, which certifies reliability and performance in automotive environments. This qualification applies to the full operating temperature range (-55°C ~ 125°C) and confirms suitability for under-hood and high-reliability automotive applications.

Q: What is the difference between Tape & Reel packaging, and does it affect interchangeability? A: Tape & Reel (TR) packaging is the standard format for automated assembly processes. Both parts use identical packaging methodology and are compatible with standard component pick-and-place equipment. Packaging format does not affect electrical or mechanical interchangeability.