KAI-4011-ABA-CR-AE CCD Image Sensor Equivalent & Substitute Parts

Part Overview

The KAI-4011-ABA-CR-AE is a CCD image sensor manufactured by onsemi, featuring a 2048H x 2048V pixel array with 7.4µm x 7.4µm pixel size. This component is classified as obsolete and requires identification of active equivalent parts for new designs or system replacements. The sensor operates at 16 frames per second with a supply voltage range of 14.5V to 15.5V, packaged in a 34-CDIP module configuration. Due to its obsolete status, sourcing active alternatives is necessary for production continuity and system upgrades.

Substiute Parts

KAI-4011-ABA-CR-AE

onsemiIn Stock: 885KAI-4011-ABA-CR-AE Datasheet

Current PartRFQ

KAI-4011-ABA-CD-AE

onsemiIn Stock: 1155KAI-4011-ABA-CD-AE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The KAI-4011-ABA-CD-AE qualifies as a direct substitute for the KAI-4011-ABA-CR-AE based on the following critical parameters:

• Active Pixel Array: Both parts maintain identical 2048H x 2048V configuration
• Pixel Size: Both parts feature 7.4µm x 7.4µm pixel dimensions
• Frames per Second: Both parts operate at 16 fps
• Voltage - Supply: Both parts require 14.5V ~ 15.5V supply range
• Package / Case: Both parts use 34-CDIP Module packaging
• Operating Temperature: Both parts support -50°C ~ 70°C range
• Moisture Sensitivity Level: Both parts rated at MSL 1 (Unlimited)
• Base Product Number: Both parts share KAI-4011 base designation

The primary distinction is product status: the substitute part is active and currently available, whereas the original part is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The KAI-4011-ABA-CD-AE is the appropriate selection for applications currently using or requiring the KAI-4011-ABA-CR-AE. The substitute part maintains electrical and mechanical compatibility across all specified parameters. The substitute part carries active product status and ROHS3 compliance certification, providing advantages for regulatory adherence and long-term supply chain stability. Both parts are manufactured by onsemi and share identical core imaging specifications, ensuring functional equivalence in system integration.

Frequently Asked Questions (FAQ)

Q: Are the KAI-4011-ABA-CR-AE and KAI-4011-ABA-CD-AE electrically compatible?

A: Yes. Both parts operate at identical supply voltage ranges (14.5V ~ 15.5V), support the same pixel array configuration (2048H x 2048V), and deliver equivalent frame rates (16 fps). Electrical interface compatibility is maintained.

Q: What is the difference between the CR-AE and CD-AE variants?

A: The primary difference is product status. The CR-AE variant is obsolete, while the CD-AE variant is active. Both parts share identical electrical and mechanical specifications, including packaging (34-CDIP Module), operating temperature range (-50°C ~ 70°C), and imaging parameters.

Q: Can the KAI-4011-ABA-CD-AE be used as a direct replacement in existing designs?

A: Yes. The substitute part maintains identical package configuration (34-CDIP Module), pin compatibility, and electrical specifications. No design modifications are required for substitution.

Q: Does the substitute part have better compliance certifications?

A: The KAI-4011-ABA-CD-AE carries ROHS3 compliance certification. The original part's compliance status is not specified in available documentation.

Q: Are there inventory considerations for these parts?

A: The KAI-4011-ABA-CR-AE (obsolete) has 794 units in stock. The KAI-4011-ABA-CD-AE (active) has 1076 units in stock, providing greater availability for ongoing production requirements.