KAI-2093-ABA-CP-BA Equivalent & Substitute Parts

Part Overview

The KAI-2093-ABA-CP-BA is a CCD image sensor manufactured by onsemi, featuring a 2.1MP resolution with 1920H x 1080V active pixel array and 7.4µm x 7.4µm pixel size. This component operates at 15 frames per second with a supply voltage range of 14.5V to 15.5V in a 32-CDIP package configuration.

The KAI-2093-ABA-CP-BA is classified as obsolete. Identifying equivalent substitute parts is necessary for applications requiring continued component availability, design updates, or system modernization where the original CCD technology may no longer meet current performance or supply chain requirements.

Substiute Parts

KAI-2093-ABA-CP-BA

onsemiIn Stock: 733KAI-2093-ABA-CP-BA Datasheet

Current PartRFQ

NOIP1FN2000A-QTI

onsemiIn Stock: 1140NOIP1FN2000A-QTI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-2093-ABA-CP-BA is evaluated based on the following critical parameters:

• Resolution compatibility: Active pixel array dimensions (1920H x 1080V minimum)
• Sensor technology: CCD or equivalent imaging technology
• Supply voltage requirements: Operating voltage range
• Frame rate capability: Minimum 15 fps
• Package compatibility: Physical and electrical interface
• Compliance certifications: RoHS3 and REACH status
• Thermal operating range: Temperature specifications

The NOIP1FN2000A-QTI qualifies as a substitute based on matching resolution specifications (1920H x 1200V), equivalent manufacturer origin (onsemi), active product status, and full compliance with RoHS3 and REACH requirements. While this substitute employs CMOS technology with integrated processor rather than CCD architecture, it maintains functional equivalence for imaging applications requiring similar resolution and frame capture capability.

Parameter Comparison

Engineering Selection Recommendations

The NOIP1FN2000A-QTI is an active product with current manufacturing status and full RoHS3 compliance, providing supply chain continuity for applications currently using the obsolete KAI-2093-ABA-CP-BA. Both components are manufactured by onsemi and maintain REACH compliance.

Selection of the NOIP1FN2000A-QTI requires evaluation of the following design considerations:

• Voltage supply architecture: The substitute operates at 1.8V to 3.3V versus the original 14.5V to 15.5V, necessitating power supply redesign
• Package footprint: 84LCC package differs from 32-CDIP, requiring PCB layout modification
• Sensor technology transition: CMOS with integrated processor replaces CCD architecture, affecting signal processing implementation
• Performance enhancement: 230 fps capability versus 15 fps original specification provides significant frame rate improvement
• Thermal range: Extended upper operating temperature limit (85°C versus 70°C) supports broader application environments

Frequently Asked Questions (FAQ)

Q: Can the NOIP1FN2000A-QTI directly replace the KAI-2093-ABA-CP-BA without design changes?

A: No. The substitute requires design modifications due to different supply voltage requirements (1.8V–3.3V versus 14.5V–15.5V), different package type (84LCC versus 32-CDIP), and different sensor technology (CMOS with processor versus CCD). Electrical interface, PCB layout, and signal processing firmware must be redesigned.

Q: What are the key compatibility criteria for substitution?

A: Resolution matching (minimum 1920H x 1080V), sensor type equivalence, supply voltage compatibility with system design, package physical fit, and compliance certifications (RoHS3, REACH) are the primary substitution criteria.

Q: Does the NOIP1FN2000A-QTI meet the same compliance requirements?

A: Yes. Both components are RoHS3 compliant and REACH unaffected, maintaining equivalent regulatory compliance status.

Q: What is the impact of the different pixel sizes (7.4µm versus 4.5µm)?

A: Smaller pixel size in the substitute (4.5µm) results in higher pixel density and improved spatial resolution capability, though this requires optical system adjustment to maintain equivalent field of view and light gathering characteristics.

Q: Are there inventory considerations for component selection?

A: The KAI-2093-ABA-CP-BA has 711 units in stock as new original inventory. The NOIP1FN2000A-QTI has 1061 units available, providing adequate supply for new designs or system updates.