KAI-2001-AAA-CR-BA CCD Image Sensor Equivalent & Substitute Parts

Part Overview

The KAI-2001-AAA-CR-BA is a 1.9MP CCD image sensor manufactured by onsemi, featuring a 1600H x 1200V active pixel array with 7.4µm x 7.4µm pixel dimensions in a 32-CDIP package. This optical sensor is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing system support and new designs. The part operates at 15 frames per second and requires a 14.5V to 15.5V supply voltage.

Substiute Parts

KAI-2001-AAA-CR-BA

onsemiIn Stock: 778KAI-2001-AAA-CR-BA Datasheet

Current PartRFQ

KAI-2001-AAA-CP-BA

onsemiIn Stock: 733KAI-2001-AAA-CP-BA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-2001-AAA-CR-BA is determined by the following critical parameters that must remain constant or compatible:

• Sensor Type: CCD technology
• Active Pixel Array: 1600H x 1200V resolution
• Pixel Size: 7.4µm x 7.4µm
• Package / Case: 32-CDIP Module
• Voltage - Supply: 14.5V ~ 15.5V
• Operating Temperature Range: -50°C ~ 70°C (TA)
• Base Product Number: KAI-2001 series

The KAI-2001-AAA-CP-BA qualifies as a direct substitute based on identical electrical and mechanical specifications. The primary difference is product status and frames per second capability, which does not affect pin-level compatibility or core sensor functionality.

Parameter Comparison

Engineering Selection Recommendations

The KAI-2001-AAA-CP-BA is a direct electrical and mechanical substitute for the KAI-2001-AAA-CR-BA. Both parts share identical pin configurations, voltage requirements, operating temperature ranges, and sensor specifications. The substitute part is currently in active production status with confirmed inventory availability (676 pcs), whereas the original part is discontinued.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in applications requiring these certifications. The 32-CDIP Module package is identical between both variants, enabling direct socket replacement without PCB modifications.

Frequently Asked Questions (FAQ)

Q: Can the KAI-2001-AAA-CP-BA replace the KAI-2001-AAA-CR-BA in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The 32-CDIP Module package, pin configuration, voltage supply range (14.5V ~ 15.5V), operating temperature range (-50°C ~ 70°C), and sensor specifications (1600H x 1200V, 7.4µm x 7.4µm pixels) are identical. Direct substitution requires no circuit modifications.

Q: What is the difference between these two part numbers?

A: The primary difference is product status and frames per second capability. The KAI-2001-AAA-CP-BA operates at 30 fps compared to 15 fps for the original part. The substitute is currently in active production, whereas the original is discontinued.

Q: Are there any compliance differences between the two parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Q: What does the 32-CDIP Module package specification mean?

A: 32-CDIP refers to a 32-pin Ceramic Dual In-line Package in module form. Both the original and substitute parts use this identical package, ensuring physical and electrical compatibility on PCBs designed for either variant.

Q: Is the higher frame rate of the substitute part a concern for compatibility?

A: No. The 30 fps capability of the substitute part is a performance enhancement that does not affect electrical compatibility or pin-level operation. Systems designed for 15 fps operation will function with the 30 fps variant without modification.