KAI-11002-ABA-CD-B0 Equivalent & Substitute Parts

Part Overview

The KAI-11002-ABA-CD-B0 is a CCD image sensor manufactured by onsemi, featuring a 10.7MP resolution with 4008H x 2672V active pixel array and 9µm x 9µm pixel size. This component operates at 14.5V to 15.5V supply voltage and delivers 3 frames per second. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations where CCD technology specifications are required.

Substiute Parts

KAI-11002-ABA-CD-B0

onsemiIn Stock: 1140KAI-11002-ABA-CD-B0 Datasheet

Current PartRFQ

NOIX1SN012KB-LTI

onsemiIn Stock: 702NOIX1SN012KB-LTI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-11002-ABA-CD-B0 is determined by the following critical parameters:

• Sensor Type: CCD technology with comparable resolution and pixel architecture
• Resolution & Pixel Array: Active pixel array dimensions (4008H x 2672V) and pixel size (9µm x 9µm)
• Frames per Second: Capture rate of 3 fps
• Supply Voltage: Operating range of 14.5V ~ 15.5V
• Package Compatibility: 40-CDIP Module form factor
• Operating Temperature Range: -50°C ~ 70°C capability
• Compliance Standards: ROHS3 compliance and EAR99 classification

The identified substitute NOIX1SN012KB-LTI represents a technology transition from CCD to CMOS architecture while maintaining optical sensor functionality within the onsemi product ecosystem. This substitute is active in production and available in quantity.

Parameter Comparison

Engineering Selection Recommendations

The KAI-11002-ABA-CD-B0 is obsolete and no longer in active production. The NOIX1SN012KB-LTI is the identified substitute from onsemi's current product portfolio. Both components maintain ROHS3 compliance and EAR99 classification, ensuring regulatory consistency.

Selection of the NOIX1SN012KB-LTI requires evaluation of system-level compatibility with the following differences: CMOS technology replaces CCD architecture, supply voltage reduces from 14.5V~15.5V to 1.1V~1.3V, package transitions from 40-CDIP to 163-BCLGA, and frame rate increases from 3 fps to 90 fps. The substitute offers higher resolution (12.6MP vs 10.7MP) and finer pixel pitch (3.2µm vs 9µm), with extended upper operating temperature to 85°C.

Frequently Asked Questions (FAQ)

Q: Can NOIX1SN012KB-LTI directly replace KAI-11002-ABA-CD-B0 in existing designs?

A: Direct replacement requires design modification. The substitute differs in sensor type (CMOS vs CCD), package (163-BCLGA vs 40-CDIP), supply voltage (1.1V~1.3V vs 14.5V~15.5V), and frame rate (90 fps vs 3 fps). PCB layout, power delivery, and signal processing circuits must be re-evaluated.

Q: What are the key compatibility considerations?

A: Package incompatibility necessitates new PCB design. Supply voltage reduction requires modified power supply architecture. CMOS technology introduces different noise characteristics and signal processing requirements compared to CCD. Frame rate increase may require faster data acquisition and processing infrastructure.

Q: Are both parts compliant with current regulations?

A: Yes. Both KAI-11002-ABA-CD-B0 and NOIX1SN012KB-LTI are ROHS3 compliant, REACH unaffected, and classified as EAR99 under export control regulations.

Q: What is the moisture sensitivity difference?

A: KAI-11002-ABA-CD-B0 has MSL 1 (unlimited shelf life without desiccant). NOIX1SN012KB-LTI has MSL 4 (72-hour floor life after bag opening), requiring controlled handling and storage procedures.

Q: How do pixel sizes affect image quality?

A: KAI-11002-ABA-CD-B0 uses 9µm x 9µm pixels; NOIX1SN012KB-LTI uses 3.2µm x 3.2µm pixels. Smaller pixels enable higher resolution in the same sensor area but may affect light sensitivity and noise performance characteristics.