KAI-08670-AXA-JD-B2 Equivalent & Substitute Parts

Part Overview

The KAI-08670-AXA-JD-B2 is an interline CCD image sensor manufactured by onsemi, featuring a 3600H x 2400V pixel array with 7.4µm x 7.4µm pixel size in a 72-CPGA package. This component is classified as obsolete, necessitating identification of functionally compatible alternatives for ongoing system support and new designs. The sensor operates at 12 frames per second with a supply voltage range of 14.5V to 15.5V.

Substiute Parts

KAI-08670-AXA-JD-B2

onsemiIn Stock: 986KAI-08670-AXA-JD-B2 Datasheet

Current PartRFQ

NOIX1SN012KB-LTI

onsemiIn Stock: 702NOIX1SN012KB-LTI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-08670-AXA-JD-B2 is based on the following criteria derived from the provided parameters:

Primary Substitution Criteria:

• Optical sensor category (Optical Sensors)
• Image sensor functionality (CCD or CMOS technology)
• Comparable active pixel array resolution
• Compatible package form factor or electrical interface
• RoHS3 compliance and REACH unaffected status
• Operating temperature range compatibility

Substitution Logic: The NOIX1SN012KB-LTI is identified as a substitute based on shared manufacturer (onsemi), identical product category (Optical Sensors), equivalent RoHS and REACH compliance status, and active product status. While the substitute employs CMOS technology rather than CCD, both sensor types function as image sensors within the optical sensor category. The substitute offers higher pixel array resolution (4096H x 3072V), smaller pixel size (3.2µm x 3.2µm), and significantly higher frame rate (90 fps), providing enhanced performance characteristics for imaging applications.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The KAI-08670-AXA-JD-B2 is classified as obsolete. The NOIX1SN012KB-LTI maintains active product status with onsemi, ensuring continued availability and manufacturing support.

Compliance Alignment: Both components are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for electronic component deployment.

Supply Chain Availability: Current inventory indicates 656 units of NOIX1SN012KB-LTI available as new original stock, compared to 942 units of the obsolete KAI-08670-AXA-JD-B2. The active status of the substitute ensures long-term procurement viability.

Electrical Interface Differences: The substitute operates at significantly lower supply voltage (1.1V ~ 1.3V versus 14.5V ~ 15.5V), requiring circuit redesign for power delivery and signal conditioning. Package differences (163-BCLGA versus 72-BCPGA) necessitate PCB layout modifications.

Frequently Asked Questions (FAQ)

Q: Can the NOIX1SN012KB-LTI directly replace the KAI-08670-AXA-JD-B2 without circuit modifications?

A: No. The substitute requires circuit redesign due to different supply voltage requirements (1.1V ~ 1.3V versus 14.5V ~ 15.5V), different package form factors (163-BCLGA versus 72-BCPGA), and different sensor technology (CMOS versus CCD). Interface signal conditioning and PCB layout must be re-evaluated.

Q: What are the key differences between these two sensors?

A: The primary differences are sensor technology (CCD versus CMOS), pixel array resolution (3600H x 2400V versus 4096H x 3072V), pixel size (7.4µm versus 3.2µm), frame rate (12 fps versus 90 fps), supply voltage (14.5V ~ 15.5V versus 1.1V ~ 1.3V), and package type (72-BCPGA versus 163-BCLGA).

Q: Why is the KAI-08670-AXA-JD-B2 marked as obsolete?

A: The component is classified as obsolete by the manufacturer, indicating discontinued production. The NOIX1SN012KB-LTI represents an active alternative from the same manufacturer for ongoing system support.

Q: Are both components RoHS compliant?

A: Yes. Both the KAI-08670-AXA-JD-B2 and NOIX1SN012KB-LTI are ROHS3 compliant and REACH unaffected.

Q: What is the moisture sensitivity difference between these parts?

A: The KAI-08670-AXA-JD-B2 has MSL 1 (unlimited shelf life), while the NOIX1SN012KB-LTI has MSL 4 (72-hour floor life after moisture exposure). The substitute requires more stringent moisture control during storage and handling.