KAI-08051-FXA-JD-BA Equivalent & Substitute Parts

Part Overview

The KAI-08051-FXA-JD-BA is an interline CCD image sensor manufactured by onsemi, featuring a 3296H x 2472V pixel array with 5.5µm x 5.5µm pixel size. This component operates at 16 frames per second and requires a 14.5V to 15.5V supply voltage. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for new designs and ongoing production requirements.

Substiute Parts

KAI-08051-FXA-JD-BA

onsemiIn Stock: 1125KAI-08051-FXA-JD-BA Datasheet

Current PartRFQ

NOIX1SE8000B-LTI

onsemiIn Stock: 1261NOIX1SE8000B-LTI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-08051-FXA-JD-BA is determined by the following critical parameters:

• Sensor Type: CCD technology with interline architecture
• Resolution: 3296H x 2472V active pixel array
• Pixel Geometry: 5.5µm x 5.5µm pixel dimensions
• Frame Rate: 16 frames per second capability
• Supply Voltage: 14.5V to 15.5V operating range
• Package Type: 68-BPGA form factor
• Compliance: ROHS3 compliance requirement

The NOIX1SE8000B-LTI is listed as a substitute part. This CMOS image sensor from onsemi provides an alternative technology platform with different electrical and mechanical characteristics that may address obsolescence concerns in specific application contexts.

Parameter Comparison

Engineering Selection Recommendations

The KAI-08051-FXA-JD-BA is classified as obsolete. The NOIX1SE8000B-LTI is an active product from the same manufacturer, ensuring continued availability and supply chain stability. Both components maintain ROHS3 compliance and REACH unaffected status.

Key differences between these sensors include technology platform (CCD versus CMOS), pixel array dimensions, pixel size, frame rate capability, supply voltage requirements, package form factor, and moisture sensitivity classification. These differences require evaluation against specific application requirements before substitution.

Frequently Asked Questions (FAQ)

Q: Can the NOIX1SE8000B-LTI directly replace the KAI-08051-FXA-JD-BA?

A: Direct replacement requires evaluation of application-specific requirements. The sensors differ in technology type, resolution, pixel size, frame rate, supply voltage, and package. Electrical and mechanical integration changes are necessary.

Q: What are the primary differences in sensor technology?

A: The KAI-08051-FXA-JD-BA uses interline CCD technology, while the NOIX1SE8000B-LTI uses CMOS technology. These represent different image capture architectures with distinct electrical characteristics and performance profiles.

Q: Are there package compatibility considerations?

A: Yes. The KAI-08051-FXA-JD-BA uses a 68-BPGA package, while the NOIX1SE8000B-LTI uses a 163-BCLGA package. PCB layout and connector modifications are required for physical integration.

Q: What supply voltage changes are required?

A: The KAI-08051-FXA-JD-BA requires 14.5V to 15.5V. The NOIX1SE8000B-LTI requires dual supplies of 1.7V to 1.9V and 2.7V to 2.9V. Power supply redesign is necessary.

Q: How do the frame rate capabilities compare?

A: The KAI-08051-FXA-JD-BA operates at 16 frames per second. The NOIX1SE8000B-LTI operates at 128 frames per second, providing significantly higher frame rate capability.

Q: What is the moisture sensitivity impact?

A: The KAI-08051-FXA-JD-BA has MSL 1 (unlimited shelf life). The NOIX1SE8000B-LTI has MSL 4 (72-hour floor life limit after moisture exposure). Storage and handling procedures differ accordingly.