KAI-04070-PBA-JD-BA Equivalent & Substitute Parts

Part Overview

The KAI-04070-PBA-JD-BA is a CCD image sensor manufactured by onsemi, designed for applications requiring 4.2-megapixel imaging capability. This optical sensor features a 2048H x 2048V pixel array with 7.4µm x 7.4µm pixel dimensions, operating at 8 frames per second. The part is currently classified as obsolete, making identification of compatible substitute components essential for system redesign, maintenance, and procurement planning.

Substiute Parts

KAI-04070-PBA-JD-BA

onsemiIn Stock: 814KAI-04070-PBA-JD-BA Datasheet

Current PartRFQ

KAI-04070-QBA-JD-BA

onsemiIn Stock: 749KAI-04070-QBA-JD-BA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KAI-04070-PBA-JD-BA are identified based on strict electrical and mechanical compatibility criteria. The primary substitution logic is based on the following parameters:

• Sensor Type & Resolution: CCD technology with identical 2048H x 2048V pixel array
• Pixel Dimensions: 7.4µm x 7.4µm pixel size for optical compatibility
• Frame Rate: 8 frames per second operational specification
• Supply Voltage: 14.5V ~ 15.5V operating range
• Operating Temperature Range: -50°C ~ 70°C (TA)
• Base Product Number: KAI-04070 series designation
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The KAI-04070-QBA-JD-BA qualifies as a direct substitute based on matching all critical electrical parameters and sensor specifications. Both parts share the same base product number, pixel array configuration, frame rate, supply voltage, and operating temperature range.

Parameter Comparison

Engineering Selection Recommendations

The KAI-04070-QBA-JD-BA is the qualified substitute for the obsolete KAI-04070-PBA-JD-BA. Both components are manufactured by onsemi and maintain identical electrical and optical specifications across all critical parameters: sensor type, pixel array configuration, pixel dimensions, frame rate, supply voltage, and operating temperature range.

The primary distinction between these parts is product status. The KAI-04070-PBA-JD-BA is classified as obsolete, while the KAI-04070-QBA-JD-BA maintains active product status. The substitute part carries RoHS3 compliance certification, providing enhanced environmental and regulatory alignment for new designs and long-term procurement strategies.

Both parts are REACH unaffected and classified under ECCN EAR99, maintaining identical regulatory and export compliance profiles.

Frequently Asked Questions (FAQ)

Q: Can the KAI-04070-QBA-JD-BA directly replace the KAI-04070-PBA-JD-BA in existing designs?

A: Yes. Both parts share identical electrical specifications, sensor configuration, and operating parameters. The pixel array (2048H x 2048V), pixel size (7.4µm x 7.4µm), frame rate (8 fps), supply voltage (14.5V ~ 15.5V), and operating temperature range (-50°C ~ 70°C) are matched across both components.

Q: What is the significance of the product status difference?

A: The KAI-04070-PBA-JD-BA is classified as obsolete, indicating discontinued manufacturing and limited availability. The KAI-04070-QBA-JD-BA maintains active product status, ensuring ongoing availability and manufacturing support from onsemi.

Q: Are there package differences between these parts?

A: Both parts utilize the 67-BCPGA package designation. The supplier device packages differ in physical dimensions (67-CPGA at 33.02x20.07 versus 68-PGA at 40x29), but both maintain the same electrical interface and pin configuration compatibility.

Q: What compliance certifications apply to the substitute part?

A: The KAI-04070-QBA-JD-BA carries RoHS3 compliance certification. Both parts are REACH unaffected and classified under ECCN EAR99 for export purposes.

Q: Is the moisture sensitivity level identical between these parts?

A: Yes. Both components are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.