KAI-0340-ABB-CB-AA-SINGLE Equivalent & Substitute Parts

Part Overview

The KAI-0340-ABB-CB-AA-SINGLE is a CCD image sensor manufactured by onsemi, featuring a 640H x 480V pixel array with 7.4µm x 7.4µm pixel size. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations. The sensor operates at 110 frames per second with a supply voltage range of 14.75V to 15.25V, packaged in a 22-CDIP module configuration.

Substiute Parts

KAI-0340-ABB-CB-AA-SINGLE

onsemiIn Stock: 1096KAI-0340-ABB-CB-AA-SINGLE Datasheet

Current PartRFQ

NOIP1SN0480A-STI

onsemiIn Stock: 1936NOIP1SN0480A-STI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KAI-0340-ABB-CB-AA-SINGLE is determined by the following critical parameters:

• Sensor Type: CCD versus CMOS technology represents a fundamental architectural difference in image capture methodology
• Active Pixel Array: Resolution specifications (640H x 480V) define the output data format and system integration requirements
• Pixel Size: Physical pixel dimensions (7.4µm x 7.4µm) affect optical performance and light sensitivity characteristics
• Frames per Second: Frame rate capability (110 fps) determines temporal resolution and system timing constraints
• Supply Voltage: Operating voltage range (14.75V ~ 15.25V) requires compatible power delivery infrastructure
• Package Configuration: 22-CDIP module form factor defines mechanical and electrical interface requirements
• Operating Temperature Range: Temperature specifications (-50°C ~ 70°C) establish environmental compatibility

The identified substitute NOIP1SN0480A-STI operates on different electrical and architectural principles, requiring comprehensive system-level evaluation before implementation.

Parameter Comparison

Engineering Selection Recommendations

The KAI-0340-ABB-CB-AA-SINGLE is obsolete, necessitating alternative component identification for new designs or system maintenance. The NOIP1SN0480A-STI is currently in active production status with ROHS3 compliance certification.

Substitution between these components requires evaluation of the following divergences:

• Sensor Architecture: CCD to CMOS transition involves different signal processing, timing, and interface requirements
• Resolution and Pixel Geometry: The NOIP1SN0480A-STI provides higher resolution (808H x 608V) with smaller pixel pitch (4.8µm x 4.8µm), affecting optical system design and data throughput
• Power Supply Requirements: Supply voltage reduction from 14.75V ~ 15.25V to 1.8V and 3.3V requires redesigned power delivery circuits
• Temperature Operating Range: The NOIP1SN0480A-STI extends the upper temperature limit to 85°C while reducing the lower limit to -40°C
• Packaging: Different package configurations necessitate mechanical redesign and PCB layout modifications

Both components maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for equivalent product categories.

Frequently Asked Questions (FAQ)

Q: Can the NOIP1SN0480A-STI directly replace the KAI-0340-ABB-CB-AA-SINGLE in existing designs?

A: Direct replacement is not feasible. The components differ in sensor type (CCD versus CMOS), supply voltage requirements (14.75V ~ 15.25V versus 1.8V and 3.3V), package configuration, and resolution specifications. System-level redesign is required.

Q: What are the primary differences between CCD and CMOS sensor types?

A: CCD and CMOS represent distinct image sensor architectures with different signal processing methodologies, timing requirements, and interface protocols. These differences necessitate separate circuit design and firmware implementation.

Q: How do pixel size differences affect system performance?

A: Pixel size (7.4µm x 7.4µm versus 4.8µm x 4.8µm) influences optical system design, light sensitivity, and noise characteristics. Smaller pixels require corresponding optical system adjustments.

Q: Are both components compliant with current regulatory standards?

A: Both the KAI-0340-ABB-CB-AA-SINGLE and NOIP1SN0480A-STI maintain ROHS3 compliance and REACH unaffected status.

Q: What packaging considerations apply to these components?

A: The KAI-0340-ABB-CB-AA-SINGLE uses 22-CDIP module packaging. The NOIP1SN0480A-STI packaging differs, requiring mechanical redesign and PCB layout modifications for implementation.

Q: How do frame rate specifications compare?

A: The KAI-0340-ABB-CB-AA-SINGLE operates at 110 frames per second, while the NOIP1SN0480A-STI operates at 120 frames per second. Both frame rates fall within comparable temporal resolution ranges.