Request Quote
(Ships tomorrow)
KAI-01150-FBA-FD-BA Equivalent & Substitute Parts
Part Overview
The KAI-01150-FBA-FD-BA is a 0.9MP CCD image sensor manufactured by onsemi, featuring a 1280H x 720V active pixel array with 5.5µm x 5.5µm pixel dimensions. This optical sensor operates at 138 frames per second and is housed in a 64-CLCC package. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and component procurement planning.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | KAI-01150-FBA-FD-BA |
| Manufacturer | onsemi |
| Category | Optical Sensors |
| Type | CCD |
| Active Pixel Array | 1280H x 720V |
| Pixel Size | 5.5µm x 5.5µm |
| Frames per Second | 138 |
| Voltage - Supply | 14.5V ~ 15.5V |
| Operating Temperature | -50°C ~ 70°C (TA) |
| Package / Case | 64-BCQFN |
| Product Status | Obsolete |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the KAI-01150-FBA-FD-BA is determined by strict alignment of the following electrical and mechanical parameters:
Critical Matching Parameters:
- Active Pixel Array: 1280H x 720V
- Pixel Size: 5.5µm x 5.5µm
- Frames per Second: 138
- Voltage - Supply: 14.5V ~ 15.5V
- Operating Temperature: -50°C ~ 70°C (TA)
- Type: CCD
- Base Product Number: KAI-01150
The KAI-01150-QBA-JD-BA qualifies as a substitute part because it maintains identical electrical performance specifications and sensor characteristics. The primary difference is the package configuration: the substitute uses a 67-CPGA package instead of the 64-CLCC package of the main part. Both parts share the same base product number (KAI-01150), confirming they are variants within the same product family with equivalent imaging capabilities.
Parameter Comparison
| Parameter | KAI-01150-FBA-FD-BA | KAI-01150-QBA-JD-BA |
|---|---|---|
| Manufacturer | onsemi | onsemi |
| Category | Optical Sensors | Optical Sensors |
| Type | CCD | CCD |
| Active Pixel Array | 1280H x 720V | 1280H x 720V |
| Pixel Size | 5.5µm x 5.5µm | 5.5µm x 5.5µm |
| Frames per Second | 138 | 138 |
| Voltage - Supply | 14.5V ~ 15.5V | 14.5V ~ 15.5V |
| Operating Temperature | -50°C ~ 70°C (TA) | -50°C ~ 70°C (TA) |
| Package / Case | 64-BCQFN | 67-BCPGA |
| Supplier Device Package | 64-CLCC (18.29x18.29) | 67-CPGA (33.02x20.07) |
| Product Status | Obsolete | Active |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
The KAI-01150-QBA-JD-BA is the qualified substitute for the obsolete KAI-01150-FBA-FD-BA. Both parts maintain identical electrical and imaging specifications, ensuring functional equivalence in sensor performance. The substitute part carries Active product status, providing ongoing availability and supply chain continuity compared to the obsolete main part.
Both parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings, meeting equivalent environmental and regulatory requirements. The primary consideration for substitution is package compatibility: the substitute uses a 67-CPGA package with dimensions of 33.02x20.07mm, compared to the 64-CLCC package (18.29x18.29mm) of the main part. PCB layout and socket design must accommodate the different package footprint and pin configuration.
Frequently Asked Questions (FAQ)
Q: What makes the KAI-01150-QBA-JD-BA a valid substitute for the KAI-01150-FBA-FD-BA?
A: Both parts share identical sensor specifications: 1280H x 720V active pixel array, 5.5µm x 5.5µm pixel size, 138 frames per second, and 14.5V ~ 15.5V supply voltage. They are variants of the same base product (KAI-01150) with equivalent imaging performance and electrical characteristics.
Q: What is the main difference between these two parts?
A: The primary difference is the package configuration. The KAI-01150-FBA-FD-BA uses a 64-CLCC package (18.29x18.29mm), while the KAI-01150-QBA-JD-BA uses a 67-CPGA package (33.02x20.07mm). This affects PCB footprint, pin layout, and mounting requirements.
Q: Can I directly replace the KAI-01150-FBA-FD-BA with the KAI-01150-QBA-JD-BA without design changes?
A: Direct replacement requires PCB redesign to accommodate the different package footprint and pin configuration. The electrical and imaging specifications are identical, but the physical package dimensions and pinout differ.
Q: Why is the KAI-01150-FBA-FD-BA listed as obsolete?
A: The part is classified as obsolete by the manufacturer. The KAI-01150-QBA-JD-BA, with Active product status, represents the available alternative for continued system support and new procurement.
Q: Are both parts compliant with the same regulatory standards?
A: Yes. Both parts are ROHS3 compliant, carry MSL Level 1 (Unlimited) ratings, and are REACH unaffected, meeting equivalent environmental and regulatory requirements.
Q: What operating temperature range do these sensors support?
A: Both parts operate across -50°C to 70°C (TA), providing identical thermal performance specifications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts