K561K10C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K561K10C0GF53L2 is a 560 pF ceramic capacitor rated at 50V with C0G/NP0 temperature coefficient, manufactured by Vishay Beyschlag/Draloric/BC Components. This radial through-hole component is designed for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Equivalent and substitute parts are identified based on matching core electrical specifications while accounting for tolerance and physical dimension variations.

Substiute Parts

K561K10C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1106K561K10C0GF53L2 Datasheet

Current PartRFQ

K561J15C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 19550K561J15C0GF53L2 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the K561K10C0GF53L2 is determined by the following critical parameters:

• Capacitance Value: Must be 560 pF (no variation allowed)
• Voltage Rating: Must be 50V or higher
• Temperature Coefficient: Must be C0G or NP0 (equivalent designations)
• Operating Temperature Range: Must support -55°C to 125°C
• Mounting Type: Must be through-hole radial configuration
• Lead Spacing: Must be 0.098" (2.50mm) for PCB compatibility
• Compliance: Must maintain ROHS3 and REACH unaffected status

The K561J15C0GF53L2 qualifies as a substitute part because it maintains all critical electrical parameters while offering improved tolerance (±5% versus ±10%), resulting in tighter capacitance accuracy. Physical dimensions vary slightly but remain compatible with standard PCB layouts designed for radial ceramic capacitors with 2.50mm lead spacing.

Parameter Comparison

Engineering Selection Recommendations

Both the K561K10C0GF53L2 and K561J15C0GF53L2 are active production parts with identical compliance certifications (ROHS3 and REACH unaffected status). Selection between these parts depends on application-specific tolerance requirements:

• K561K10C0GF53L2: Suitable for applications where ±10% capacitance tolerance is acceptable and component size constraints favor the smaller physical footprint (3.60mm x 2.30mm).

• K561J15C0GF53L2: Appropriate for applications requiring tighter capacitance accuracy (±5% tolerance). The slightly larger physical dimensions (4.00mm x 2.60mm) and increased seated height (5.60mm) must be verified against PCB layout constraints.

Both parts maintain identical electrical performance across the full operating temperature range and voltage rating. Lead spacing remains constant at 2.50mm, ensuring PCB footprint compatibility for standard radial ceramic capacitor layouts.

Frequently Asked Questions (FAQ)

Q: Can K561J15C0GF53L2 be used as a direct replacement for K561K10C0GF53L2?

A: Yes, provided PCB layout accommodates the slightly larger physical dimensions (4.00mm x 2.60mm versus 3.60mm x 2.30mm) and increased seated height (5.60mm versus 5.20mm). Lead spacing remains identical at 2.50mm.

Q: What is the primary difference between these two parts?

A: The K561J15C0GF53L2 offers ±5% tolerance compared to the ±10% tolerance of the K561K10C0GF53L2, providing tighter capacitance accuracy. All other electrical specifications remain identical.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both K561K10C0GF53L2 and K561J15C0GF53L2 are ROHS3 compliant and REACH unaffected, meeting current environmental standards.

Q: Does the temperature coefficient differ between these parts?

A: No. Both parts use C0G/NP0 temperature coefficient, ensuring stable capacitance performance across the -55°C to 125°C operating range.

Q: What should be verified before substituting these parts?

A: Verify that PCB layout accommodates the physical dimensions and seated height of the substitute part. Confirm that the application tolerance requirement aligns with the selected part's specification (±10% or ±5%).