K470K15C0GF5TL2 Equivalent & Substitute Parts

Part Overview

The K470K15C0GF5TL2 is a 47 pF ceramic capacitor manufactured by Vishay Beyschlag/Draloric/BC Components, rated for 50V with C0G/NP0 temperature coefficient and ±10% tolerance. This radial through-hole component operates across -55°C to 125°C and is classified as Active product status. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance certifications remain compatible within the allowed parameter ranges for this capacitor category.

Substiute Parts

K470K15C0GF5TL2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1062K470K15C0GF5TL2 Datasheet

Current PartRFQ

K470J15C0GF5TL2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 51655K470J15C0GF5TL2 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the K470K15C0GF5TL2 is determined by strict equivalence in the following parameters:

• Capacitance value: 47 pF (exact match required)
• Voltage rating: 50V (exact match required)
• Temperature coefficient: C0G/NP0 (exact match required)
• Operating temperature range: -55°C ~ 125°C (exact match required)
• Mounting type: Through Hole Radial (exact match required)
• Lead spacing: 0.098" (2.50mm) (exact match required)
• Physical dimensions: 0.157" L x 0.102" W, 0.220" height seated (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

Tolerance variation is permitted within the allowed range for this component category. Packaging format (Tape & Reel versus Cut Tape) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The K470J15C0GF5TL2 qualifies as a direct substitute for the K470K15C0GF5TL2. Both components are manufactured by Vishay Beyschlag/Draloric/BC Components within the Mono-Kap™ K series and maintain Active product status. Both meet ROHS3 compliance and REACH Unaffected classification.

The primary distinction is tolerance specification: the substitute part offers ±5% tolerance compared to the main part's ±10% tolerance. This represents improved tolerance performance and does not restrict substitution in applications designed for the K470K15C0GF5TL2.

Packaging format differs (Cut Tape for substitute versus Tape & Reel for main part), which affects procurement and handling but does not impact electrical or mechanical performance in the application.

Frequently Asked Questions (FAQ)

Q: Can K470J15C0GF5TL2 replace K470K15C0GF5TL2 in my circuit?

A: Yes. Both components share identical capacitance (47 pF), voltage rating (50V), temperature coefficient (C0G/NP0), operating temperature range (-55°C ~ 125°C), physical dimensions, and lead spacing. The substitute part's ±5% tolerance is tighter than the main part's ±10% tolerance, making it compatible with all applications designed for the K470K15C0GF5TL2.

Q: What is the difference between ±10% and ±5% tolerance?

A: Tolerance defines the acceptable deviation from the nominal capacitance value. The K470K15C0GF5TL2 allows deviation between 42.3 pF and 51.7 pF. The K470J15C0GF5TL2 allows deviation between 44.65 pF and 49.35 pF. The substitute part's tighter tolerance provides greater precision and is suitable for all applications requiring the main part.

Q: Does packaging format affect compatibility?

A: No. The main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Cut Tape (CT) format. Both packaging formats contain identical components. Packaging affects procurement logistics and handling procedures but does not alter electrical or mechanical performance.

Q: Are both parts RoHS compliant?

A: Yes. Both K470K15C0GF5TL2 and K470J15C0GF5TL2 are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. Both components have identical radial through-hole package specifications, lead spacing (0.098" / 2.50mm), and physical dimensions (0.157" L x 0.102" W, 0.220" height seated). They mount identically on PCBs designed for either part number.