K470K10C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K470K10C0GF53L2 is a 47 pF ceramic capacitor rated at 50V with C0G/NP0 temperature coefficient and ±10% tolerance, manufactured by Vishay Beyschlag/Draloric/BC Components in the Mono-Kap™ K series. This radial through-hole component is designed for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. Equivalent and substitute parts are identified based on matching capacitance value, temperature coefficient, and compatible electrical ratings while accommodating variations in tolerance and voltage rating.

Key Parameters

Parameter	Value
Capacitance	47 pF
Tolerance	±10%
Voltage Rating	50V
Temperature Coefficient	C0G, NP0
Operating Temperature Range	-55°C to 125°C
Mounting Type	Through Hole
Package Type	Radial
Lead Spacing	0.098" (2.50mm)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the K470K10C0GF53L2 is determined by the following criteria:

Primary Matching Parameters:

Capacitance value: 47 pF (exact match required)
Temperature coefficient: C0G/NP0 (exact match required)
Mounting type: Through Hole (exact match required)
Package type: Radial (exact match required)
Lead spacing: 0.098" (2.50mm) (exact match required)

Allowable Variations:

Tolerance: ±10% or tighter (±5% acceptable as upgrade)
Voltage rating: 50V or higher (100V acceptable as upgrade)
Physical dimensions: Slight variations permitted within radial package constraints

The three substitute parts identified maintain identical capacitance, temperature coefficient, and lead spacing while offering either improved tolerance specifications or higher voltage ratings suitable for applications requiring enhanced performance margins.

Parameter Comparison

Parameter	K470K10C0GF53L2	K470J15C0GF53L2	K470J15C0GH53L2	K470K15C0GH53L2
Capacitance	47 pF	47 pF	47 pF	47 pF
Tolerance	±10%	±5%	±5%	±10%
Voltage Rating	50V	50V	100V	100V
Temperature Coefficient	C0G, NP0	C0G, NP0	C0G, NP0	C0G, NP0
Operating Temperature	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Package Type	Radial	Radial	Radial	Radial
Lead Spacing	0.098" (2.50mm)	0.098" (2.50mm)	0.098" (2.50mm)	0.098" (2.50mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

All four parts—the original K470K10C0GF53L2 and the three substitutes K470J15C0GF53L2, K470J15C0GH53L2, and K470K15C0GH53L2—are Active status components manufactured by Vishay Beyschlag/Draloric/BC Components and maintain ROHS3 compliance and REACH Unaffected status.

K470J15C0GF53L2 provides improved tolerance (±5% versus ±10%) while maintaining the 50V rating and identical physical footprint. This substitute is suitable for applications where tighter capacitance tolerance is required without increasing voltage stress.

K470J15C0GH53L2 and K470K15C0GH53L2 both offer 100V voltage rating, providing enhanced voltage margin over the original 50V specification. K470J15C0GH53L2 combines the 100V rating with ±5% tolerance, while K470K15C0GH53L2 maintains ±10% tolerance with 100V rating. Both are suitable for applications requiring higher voltage headroom or operating in elevated voltage environments.

Physical dimensions increase slightly for the substitute parts (0.157" L x 0.102" W versus 0.142" L x 0.091" W for the original), with corresponding height increases from 0.205" to 0.220". PCB layout verification is necessary to confirm accommodation of these dimensional changes.

Frequently Asked Questions (FAQ)

Q: Can K470J15C0GF53L2 be used as a direct replacement for K470K10C0GF53L2?

A: Yes. Both parts share identical capacitance (47 pF), temperature coefficient (C0G/NP0), voltage rating (50V), lead spacing (0.098"), and mounting configuration. K470J15C0GF53L2 offers tighter tolerance (±5%) as an upgrade. Physical dimensions are slightly larger; PCB layout must accommodate 0.157" L x 0.102" W versus 0.142" L x 0.091" W.

Q: What is the advantage of selecting K470J15C0GH53L2 or K470K15C0GH53L2?

A: Both substitute parts provide 100V voltage rating compared to the original 50V specification. This higher rating creates additional voltage margin and is suitable for circuits operating at elevated voltages or requiring enhanced reliability margins. K470J15C0GH53L2 additionally provides ±5% tolerance.

Q: Are there any compatibility concerns with the substitute parts?

A: All substitute parts maintain identical lead spacing (0.098" / 2.50mm) and radial through-hole mounting configuration. Physical dimensions increase slightly; verify PCB layout accommodates the larger envelope (0.157" L x 0.102" W x 0.220" H maximum). All parts are ROHS3 compliant and REACH Unaffected.

Q: Which substitute should be selected for general replacement?

A: Selection depends on application requirements. For direct replacement with improved tolerance, use K470J15C0GF53L2. For applications requiring higher voltage margin, use K470J15C0GH53L2 (±5% tolerance) or K470K15C0GH53L2 (±10% tolerance).

Q: Do all parts share the same series designation?

A: Yes. All four parts belong to the Vishay Mono-Kap™ K series and maintain consistent electrical and thermal characteristics across the -55°C to 125°C operating range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message