K330J10C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K330J10C0GF53L2 is a 33 pF ceramic capacitor rated at 50V with C0G/NP0 temperature coefficient, manufactured by Vishay Beyschlag/Draloric/BC Components. This radial through-hole component is designed for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part is currently active and ROHS3 compliant. Substitute parts are necessary when the primary part becomes unavailable or when design requirements call for alternative lead spacing or packaging configurations while maintaining identical electrical specifications.

Key Parameters

Parameter	Value
Capacitance	33 pF
Tolerance	±5%
Voltage Rating	50V
Temperature Coefficient	C0G, NP0
Operating Temperature Range	-55°C to 125°C
Mounting Type	Through Hole
Package Type	Radial
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the K330J10C0GF53L2 is determined by strict equivalence in the following electrical parameters: capacitance value (33 pF), tolerance (±5%), voltage rating (50V), and temperature coefficient (C0G/NP0). All substitute parts must maintain these specifications to ensure functional compatibility.

Mechanical variations are permitted within the following constraints:

Lead spacing may differ (2.50mm or 5.00mm)
Physical dimensions (length, width, height) may vary
Lead style may be straight or formed/kinked
Packaging format may differ (Bulk or Cut Tape)

The substitute parts listed below meet all electrical requirements and are qualified alternatives for the K330J10C0GF53L2.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage	Temp Coeff	Lead Spacing	Size (L x W)	Height Max	Product Status	Packaging
K330J10C0GF53L2	Vishay Beyschlag/Draloric/BC Components	33 pF	±5%	50V	C0G, NP0	0.098" (2.50mm)	0.142" x 0.091" (3.60mm x 2.30mm)	0.205" (5.20mm)	Active	Bulk
K330J15C0GF53L2	Vishay Beyschlag/Draloric/BC Components	33 pF	±5%	50V	C0G, NP0	0.098" (2.50mm)	0.157" x 0.102" (4.00mm x 2.60mm)	0.220" (5.60mm)	Active	Bulk
FK18C0G1H330JN020	TDK Corporation	33 pF	±5%	50V	C0G, NP0	0.098" (2.50mm)	0.157" x 0.098" (4.00mm x 2.50mm)	0.217" (5.50mm)	Not For New Designs	Bulk
FK28C0G1H330JN000	TDK Corporation	33 pF	±5%	50V	C0G, NP0	0.197" (5.00mm)	0.157" x 0.098" (4.00mm x 2.50mm)	0.217" (5.50mm)	Not For New Designs	Bulk
RDE5C1H330J0K1H03B	Murata Electronics	33 pF	±5%	50V	C0G, NP0	0.197" (5.00mm)	0.157" x 0.098" (4.00mm x 2.50mm)	0.236" (6.00mm)	Active	Bulk
RDE5C1H330J0M1H03A	Murata Electronics	33 pF	±5%	50V	C0G, NP0	0.197" (5.00mm)	0.157" x 0.098" (4.00mm x 2.50mm)	0.236" (6.00mm)	Active	Cut Tape (CT)

Engineering Selection Recommendations

When selecting a substitute for K330J10C0GF53L2, prioritize parts with Active product status. The K330J15C0GF53L2 from Vishay maintains the same manufacturer lineage and Active status, making it the primary direct substitute. Both Murata parts (RDE5C1H330J0K1H03B and RDE5C1H330J0M1H03A) are Active and provide equivalent electrical performance with 5.00mm lead spacing, suitable for applications where PCB layout accommodates wider spacing.

The TDK parts (FK18C0G1H330JN020 and FK28C0G1H330JN000) carry "Not For New Designs" status and should be used only in legacy system maintenance or when existing inventory constraints require their use. All listed substitutes maintain ROHS3 compliance and REACH unaffected status, matching the regulatory profile of the primary part.

Frequently Asked Questions (FAQ)

Q: Can K330J15C0GF53L2 be used as a direct replacement for K330J10C0GF53L2?

A: Yes. Both parts share identical electrical specifications (33 pF, ±5%, 50V, C0G/NP0) and are manufactured by Vishay. The primary difference is physical size and lead spacing (2.50mm), which requires PCB layout verification to confirm fit.

Q: What is the difference between 2.50mm and 5.00mm lead spacing?

A: Lead spacing determines the distance between the two component leads on the PCB. The K330J10C0GF53L2 uses 2.50mm spacing, while RDE5C1H330J0K1H03B and RDE5C1H330J0M1H03A use 5.00mm spacing. PCB hole patterns must accommodate the selected spacing.

Q: Why are TDK FK series parts marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued these parts for new applications. They remain available for existing inventory but should not be specified for new designs. Use Murata or Vishay alternatives for new projects.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH unaffected status, matching the regulatory requirements of the K330J10C0GF53L2.

Q: What is the difference between Bulk and Cut Tape packaging?

A: Bulk packaging is supplied loose in containers, while Cut Tape (CT) packaging provides components on individual tape segments. Selection depends on assembly process requirements and inventory management practices.

Q: Can I use RDE5C1H330J0M1H03A in place of RDE5C1H330J0K1H03B?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: RDE5C1H330J0M1H03A is supplied in Cut Tape, while RDE5C1H330J0K1H03B is supplied in Bulk. Selection depends on assembly process compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message