K220K10C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K220K10C0GF53L2 is a 22 pF ceramic capacitor manufactured by Vishay Beyschlag/Draloric/BC Components from the Mono-Kap™ K series. This radial through-hole component operates at 50V with C0G/NP0 temperature coefficient and ±10% tolerance. The part is active and in production. Substitute parts are identified when original inventory becomes unavailable or when design requirements permit upgraded electrical specifications within the same functional category.

Key Parameters

Parameter	Value
Capacitance	22 pF
Tolerance	±10%
Voltage Rating	50V
Temperature Coefficient	C0G, NP0
Operating Temperature Range	-55°C ~ 125°C
Mounting Type	Through Hole
Package Type	Radial
Lead Spacing	0.098" (2.50mm)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Compatibility Requirements:

Capacitance value: 22 pF (fixed)
Temperature coefficient: C0G/NP0 (fixed)
Mounting type: Through Hole (fixed)
Package type: Radial (fixed)
Lead spacing: 0.098" or 0.100" (2.50mm or 2.54mm)
Operating temperature range: -55°C ~ 125°C (fixed)
RoHS3 compliance (fixed)

Allowed Variation Parameters:

Tolerance: ±10% or ±5% (tighter tolerance is acceptable)
Voltage rating: 50V or higher (higher voltage is acceptable)
Physical dimensions: Minor variations acceptable within PCB layout constraints
Manufacturer: Different manufacturers permitted if all electrical parameters match

Substitute parts are grouped into three categories: Vishay upgrades (tighter tolerance or higher voltage), cross-manufacturer equivalents (KEMET and KYOCERA AVX), and manufacturer-recommended alternatives.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage	Temp Coeff	Lead Spacing	Height (Max)	Inventory
K220K10C0GF53L2	Vishay	22 pF	±10%	50V	C0G/NP0	0.098" (2.50mm)	0.205" (5.20mm)	1,048 pcs
K220J15C0GF53L2	Vishay	22 pF	±5%	50V	C0G/NP0	0.098" (2.50mm)	0.220" (5.60mm)	22,924 pcs
K220J15C0GH53L2	Vishay	22 pF	±5%	100V	C0G/NP0	0.098" (2.50mm)	0.220" (5.60mm)	23,807 pcs
K220K15C0GH53L2	Vishay	22 pF	±10%	100V	C0G/NP0	0.098" (2.50mm)	0.220" (5.60mm)	7,101 pcs
C315C220K5G5TA	KEMET	22 pF	±10%	50V	C0G/NP0	0.100" (2.54mm)	0.183" (4.66mm)	3,719 pcs
SR155A220KAR	KYOCERA AVX	22 pF	±10%	50V	C0G/NP0	0.100" (2.54mm)	0.150" (3.81mm)	2,596 pcs

Engineering Selection Recommendations

Direct Replacement (Same Electrical Specifications):

C315C220K5G5TA (KEMET GoldMax 300 Comm C0G series) and SR155A220KAR (KYOCERA AVX SkyCap® SR series) are electrically equivalent to K220K10C0GF53L2 with identical capacitance, tolerance, voltage rating, and temperature coefficient. Both are ROHS3 compliant. Lead spacing differs by 0.002" (0.04mm), which is within standard PCB tolerance for radial through-hole components.

Upgraded Specifications (Higher Tolerance Precision):

K220J15C0GF53L2 provides ±5% tolerance versus ±10%, maintaining 50V rating and identical lead spacing. This upgrade is suitable when tighter capacitance tolerance is required without voltage derating.

Upgraded Specifications (Higher Voltage Rating):

K220J15C0GH53L2 and K220K15C0GH53L2 both provide 100V rating versus 50V, with identical capacitance and temperature coefficient. K220J15C0GH53L2 adds ±5% tolerance. These upgrades are suitable for applications requiring higher voltage margin or operating in elevated voltage environments.

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and identical operating temperature range (-55°C ~ 125°C).

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher voltage rating? A: Yes. A 100V-rated capacitor (K220J15C0GH53L2 or K220K15C0GH53L2) is a direct functional substitute for a 50V application. Higher voltage rating provides additional safety margin and does not degrade performance in lower-voltage circuits.

Q: What is the difference between ±10% and ±5% tolerance? A: Tolerance specifies the allowable deviation from the nominal 22 pF value. ±10% permits 19.8–24.2 pF; ±5% permits 20.9–23.1 pF. Applications requiring precise capacitance values should use ±5% parts. General-purpose circuits typically accept ±10%.

Q: Are there physical size differences between substitutes? A: Yes. Lead spacing varies between 0.098" (2.50mm) for Vishay parts and 0.100" (2.54mm) for KEMET and KYOCERA AVX parts. Height also varies (0.150"–0.220" maximum seated height). Verify PCB layout accommodates the selected substitute before assembly.

Q: Can I substitute across manufacturers? A: Yes. KEMET C315C220K5G5TA and KYOCERA AVX SR155A220KAR are electrically and functionally equivalent to the Vishay K220K10C0GF53L2. All three maintain identical capacitance, voltage, temperature coefficient, and compliance certifications.

Q: Which substitute has the best availability? A: K220J15C0GH53L2 has the highest inventory at 23,807 pieces, followed by K220J15C0GF53L2 at 22,924 pieces. Both are Vishay parts with enhanced specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message