K220K10C0GF53H5 Equivalent & Substitute Parts

Part Overview

The K220K10C0GF53H5 is a 22 pF ceramic capacitor rated at 50V with C0G/NP0 temperature coefficient, manufactured by Vishay Beyschlag/Draloric/BC Components under the Mono-Kap™ K series. This radial through-hole component is designed for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part is currently active and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across manufacturers.

Substiute Parts

K220K10C0GF53H5

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 783K220K10C0GF53H5 Datasheet

Current PartRFQ

C315C220K5G5TA

KEMETIn Stock: 3732C315C220K5G5TA Datasheet

MFR RecommendedRFQ

SR155A220KAR

KYOCERA AVXIn Stock: 2627SR155A220KAR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the K220K10C0GF53H5 are qualified based on the following criteria:

• Identical capacitance value: 22 pF
• Matching tolerance: ±10%
• Equal or greater voltage rating: 50V minimum
• Identical temperature coefficient: C0G/NP0
• Matching operating temperature range: -55°C to 125°C
• Compatible mounting type: Through Hole
• Compatible package type: Radial
• Equivalent regulatory compliance: ROHS3 Compliant

The identified substitutes maintain these electrical and mechanical parameters, ensuring functional equivalence in circuit applications. Physical dimensions may vary within acceptable assembly tolerances for radial lead spacing and component height.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain identical electrical specifications and are ROHS3 compliant with active product status. Selection between the K220K10C0GF53H5, C315C220K5G5TA, and SR155A220KAR should be based on physical space constraints and lead spacing requirements within the circuit board layout.

The K220K10C0GF53H5 features a 0.197" (5.00mm) lead spacing with a maximum seated height of 0.244" (6.20mm). The C315C220K5G5TA and SR155A220KAR both utilize 0.100" (2.54mm) lead spacing, with the SR155A220KAR offering the most compact profile at 0.150" (3.81mm) maximum seated height. PCB footprint compatibility must be verified before substitution.

Frequently Asked Questions (FAQ)

Q: Can the C315C220K5G5TA or SR155A220KAR be used as direct replacements for the K220K10C0GF53H5?

A: Electrical substitution is valid. All three parts share identical capacitance, tolerance, voltage rating, temperature coefficient, and operating temperature range. However, lead spacing differs: the K220K10C0GF53H5 uses 5.00mm spacing while the KEMET and KYOCERA AVX parts use 2.54mm spacing. PCB footprint compatibility must be confirmed before installation.

Q: What is the significance of the C0G/NP0 temperature coefficient?

A: C0G and NP0 designations are equivalent and indicate minimal capacitance change across the -55°C to 125°C operating temperature range. This stability is critical for applications requiring predictable circuit performance across temperature variations.

Q: Are there physical installation considerations when substituting between these parts?

A: Yes. The K220K10C0GF53H5 has a larger footprint with 5.00mm lead spacing and 6.20mm maximum height. The C315C220K5G5TA and SR155A220KAR have 2.54mm lead spacing and reduced heights. Verify that the target PCB design accommodates the selected part's physical dimensions and lead configuration.

Q: Do all three parts meet the same regulatory requirements?

A: Yes. All parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8532.24.0060.