K220J10C0GF53L2 Ceramic Capacitor Equivalent & Substitute Parts

Part Overview

The K220J10C0GF53L2 is a 22 pF ±5% 50V ceramic capacitor with C0G/NP0 temperature coefficient manufactured by Vishay Beyschlag/Draloric/BC Components. This radial through-hole component is part of the Mono-Kap™ K series and maintains active product status. Equivalent and substitute parts are identified based on matching electrical specifications (capacitance, tolerance, voltage rating, temperature coefficient) and compatible mechanical parameters (mounting type, package style, lead configuration).

Key Parameters

Parameter	Value
Capacitance	22 pF
Tolerance	±5%
Voltage Rating	50V
Temperature Coefficient	C0G, NP0
Operating Temperature Range	-55°C ~ 125°C
Mounting Type	Through Hole
Package / Case	Radial
Lead Style	Straight
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution validity is determined by the following criteria:

Electrical Equivalence Requirements:

Capacitance: 22 pF (exact match required)
Tolerance: ±5% (exact match required)
Voltage Rating: 50V minimum (equal or higher acceptable)
Temperature Coefficient: C0G/NP0 (exact match required)
Operating Temperature: -55°C ~ 125°C (exact match required)

Mechanical Compatibility Requirements:

Mounting Type: Through Hole (exact match required)
Package / Case: Radial (exact match required)
Lead Style: Straight or Formed Leads (both acceptable for through-hole radial packages)

Compliance Requirements:

RoHS3 Compliant (all substitutes must meet this standard)
REACH Unaffected status maintained across all alternatives

Substitutes are grouped into three categories: direct equivalents (identical specifications), compatible alternatives (same electrical specs with minor dimensional variations), and upgrades (higher voltage rating with identical other parameters).

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage	Temp Coeff	Lead Spacing	Product Status	Inventory
K220J10C0GF53L2	Vishay	22 pF	±5%	50V	C0G/NP0	0.098" (2.50mm)	Active	847 Pcs
K220J15C0GF53L2	Vishay	22 pF	±5%	50V	C0G/NP0	0.098" (2.50mm)	Active	22924 Pcs
K220J15C0GH53L2	Vishay	22 pF	±5%	100V	C0G/NP0	0.098" (2.50mm)	Active	23807 Pcs
C315C220J5G5TA	KEMET	22 pF	±5%	50V	C0G/NP0	0.100" (2.54mm)	Active	6864 Pcs
C317C220J5G5TA	KEMET	22 pF	±5%	50V	C0G/NP0	0.200" (5.08mm)	Active	1845 Pcs
FK18C0G1H220JN020	TDK	22 pF	±5%	50V	C0G/NP0	0.098" (2.50mm)	Not For New Designs	1355 Pcs
FK28C0G1H220JN000	TDK	22 pF	±5%	50V	C0G/NP0	0.197" (5.00mm)	Not For New Designs	3432 Pcs
RDE5C1H220J0M1H03A	Murata	22 pF	±5%	50V	C0G/NP0	0.197" (5.00mm)	Active	5884 Pcs

Engineering Selection Recommendations

Primary Substitutes (Active Status, Recommended for New Designs):

K220J15C0GF53L2 (Vishay) provides direct electrical equivalence with identical 50V rating and C0G/NP0 temperature coefficient. Higher inventory availability (22924 pcs) supports production continuity. Dimensional variation (0.157" L vs 0.142" L) requires PCB layout verification but maintains identical lead spacing (2.50mm).

K220J15C0GH53L2 (Vishay) offers voltage upgrade to 100V while maintaining all other electrical parameters. Identical lead spacing and mechanical compatibility with footprint adjustment capability. Recommended for applications requiring enhanced voltage margin.

C315C220J5G5TA (KEMET) and C317C220J5G5TA (KEMET) provide cross-manufacturer equivalence with identical electrical specifications. Both maintain ROHS3 compliance and active product status. Lead spacing differences (2.54mm and 5.08mm respectively) require PCB footprint compatibility verification.

RDE5C1H220J0M1H03A (Murata) maintains active product status with identical electrical specifications. Lead spacing of 5.00mm requires PCB layout confirmation. Available in Cut Tape packaging.

Legacy Substitutes (Not Recommended for New Designs):

FK18C0G1H220JN020 and FK28C0G1H220JN000 (TDK) are marked "Not For New Designs" and should be used only for legacy system maintenance or repair applications. Both maintain electrical equivalence but product status restricts new design implementation.

Frequently Asked Questions (FAQ)

Q: Can K220J15C0GF53L2 replace K220J10C0GF53L2 directly?

A: Yes. Both parts share identical electrical specifications (22 pF, ±5%, 50V, C0G/NP0) and lead spacing (2.50mm). Physical dimensions differ slightly (length 0.157" vs 0.142"), requiring PCB layout verification to confirm clearance compatibility.

Q: What is the difference between K220J15C0GF53L2 and K220J15C0GH53L2?

A: The primary difference is voltage rating: K220J15C0GF53L2 is rated 50V, while K220J15C0GH53L2 is rated 100V. All other electrical parameters (22 pF, ±5%, C0G/NP0) and mechanical specifications remain identical. The 100V variant provides higher voltage margin for the same footprint.

Q: Are KEMET C315C220J5G5TA and C317C220J5G5TA interchangeable?

A: Both provide electrical equivalence to the K220J10C0GF53L2, but lead spacing differs: C315C uses 2.54mm spacing while C317C uses 5.08mm spacing. PCB footprint compatibility must be verified before substitution. They are not directly interchangeable without layout modification.

Q: Why are TDK FK series parts marked "Not For New Designs"?

A: Product status indicates these parts are in end-of-life phase. While electrically equivalent, they should be reserved for maintenance of existing systems. Active alternatives from Vishay, KEMET, and Murata are recommended for new design implementations.

Q: Does lead style (Straight vs Formed Leads) affect substitution?

A: Lead style affects insertion and soldering process but does not impact electrical performance. Straight leads (K220J10C0GF53L2) and Formed Leads (FK18C0G1H220JN020, FK28C0G1H220JN000) are mechanically compatible with standard through-hole assembly equipment. PCB hole spacing must match lead spacing specification.

Q: What packaging options are available?

A: K220J10C0GF53L2 and most substitutes are supplied in Bulk packaging. RDE5C1H220J0M1H03A (Murata) is available in Cut Tape (CT) packaging, suitable for automated pick-and-place assembly. Packaging selection depends on production volume and assembly process requirements.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitutes maintain ROHS3 compliance and REACH Unaffected status, meeting environmental and regulatory requirements for commercial and industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message